Ошибки и обсуждение [ CM2MT2_v2.00]

[yurii-62]

HighScreen Power Five Max
Read Flash [ v1.58 ]

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 96 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM46H
[eMMC] : FLASH_CID : 150100524836344D42020D9EA8292485
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000E8F800000
[eMMC] : FLASH_UCP : 59640 MiB [eMMC 128 GiB]
DEV RID    : 0xE35D677E145E638F80BD7CDD10F97A63
INT RAM    : 0x00000000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!


[Read Ok] : preloader_gnbj6755_66_m.bin
[Read Ok] : recovery.img
[Read Stop] : Unknow data!
Make next steps : 
1. Use WinRar or 7zip and rar this folder : MT6755______
2. Send this archive with title "FWFACT" to rd@infinity-box.com

Read error :(

Operation Failed
Elapsed: 00:00:36
Reconnect Power/Cable!

Read Firmware [ v2.00 r4 ]

Operation : Read Firmware [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM96)
MODE : PRELOADER PORT
PORT : 96
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1812 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 150100524836344D42020D9EA8292485
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RH64MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0xE8F800000 [ 58,24 GB ]

        CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 145E638F80BD7CDD10F97A638317007

DA : USB : HIGH-SPEED

Boot done!

Board Platform : mt6755
Build Time     : 1491985559
Display ID     : PowerFiveMax
Patch Level    : MRA58K
Product Info   : gnbj6755_66_m
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2017-01-05
Product Board  : PowerFiveMax
Product Brand  : HighScreen
Product Device : PowerFiveMax
Product Manfct : Vobis
Product Model  : Power Five Max
Product Name   : PowerFiveMax

MT6755__Vobis__Power_Five_Max__6.0__PowerFiveMax__MRA58K__gnbj6755_66_m

Unsupport : 0x0000000001088000 : 0x0000000000000400 : gnflags


Error : Device NOT supported for SAVE READ!
Send log and report.log (if exists) to support! Include device info also!

Reconnect Power/Cable!

Пришел с Frp. Удачно сброшен v1.58, NV. также вроде как считал а вот прошивку отказался читать что 1.58 что 2.04.