Успешное применение [CM2QLM Qualcomm]

[iSKA SERViCE]

Nokia 5

Reading flash

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.15


Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : E4DD7D3B
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : 717D98AEBA360C9D1CC98A82142B0E04
ID_BLOCK_L : EFD5B2363ADF19545635C1389563B2BD
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!


Brand : Nokia
ProdName : TA-1003_00WW
ProdModel : TA-1003
Device : D1C
AndroidVer: 7.1.1
Manufact. : FIH
QLMxCPU : MSM8937

DevInfo : MSM8937__FIH__Nokia__ANDR_v7.1.1__TA-1003__D1C__TA-1003_00WW

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : securefs.img
[Read Ok] : rf_nv.bin
[Read Ok] : deviceinfo.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : ftm_boot.img
[Read Ok] : def_nv.img
[Read Ok] : hwconf.cfg
[Read Ok] : sysinfo.cfg
[Read Ok] : splashm.img
[Read Ok] : hidden.img
[Read Ok] : cda.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8937 / eMMC
Firmware Size : 4467 MiB

Done!
Elapsed: 00:08:51

Reconnect Power/Cable!

reset frp

Operation : Reset Settings [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : E4DD7D3B
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : 717D98AEBA360C9D1CC98A82142B0E04
ID_BLOCK_L : EFD5B2363ADF19545635C1389563B2BD
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!