Успешное применение, без комментариев [CM2MTK MediaTek]

[gulka]

Philips E103 Прошивка

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 20 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 520781BB809DFB65CA5B3C0D28754B5A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000 
[0] : FLASH_LEN : 0x00300000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info   : K99M_F02_PHILIPS_ER_PCB01_gprs_MT6261_S00.E103_M6261M_1626_V07B_RU.bin
FileVersion : E103_M6261M_1626_V07B_RU

[ScatCFG] : MT6261 / E103_M6261M_1626_V07B_RU / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\K99M_F02_PHILIPS_ER_PCB01_gprs_MT6261_S00\

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!