Ошибки и обсуждение [CM2QLM Qualcomm]

[SurTaX]

Сообщение от SurTaX

Redmi 3 MSM8936 не поддерживается

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 08F1B755
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : C9B61531BB8A7E215024B4F367D72728
ID_BLOCK_L : BB453F96597012C8B716B3B6C135E1A4
Use CM2 Internal Loader

Error : Loader send failed!
Check cable, connection and drivers!

Reconnect Power/Cable!

Получилось законектить с отключенным АКБ

Operation : Identify [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 08F1B755
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : C9B61531BB8A7E215024B4F367D72728
ID_BLOCK_L : BB453F96597012C8B716B3B6C135E1A4
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand : Xiaomi
ProdName : ido
ProdModel : Redmi 3
Device : ido
AndroidVer: 5.1.1
Manufact. : Xiaomi
QLMxCPU : MSM8916

Done!
Elapsed: 00:00:09

Reconnect Power/Cable!

Operation : Reset Settings [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 08F1B755
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : C9B61531BB8A7E215024B4F367D72728
ID_BLOCK_L : BB453F96597012C8B716B3B6C135E1A4
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


MIAccount reset passed!

Normal reset :
> Select "FORCED FIX" or "REPAIR" in FMT settings, press "Format FS / Reset Settings"
> PowerOn device and use. IF Device stuck on black screen with cable - use another FMT
> Not all devices supported yet! (tested on Hydrogen,Land,Redmi2)

Done!
Elapsed: 00:00:14

Reconnect Power/Cable!