|
|
|||||||
| Infinity Box Форум поддержки программатора Infinity Box |
 |
|
|
Опции темы | Оценить тему | Опции просмотра |
06.10.2016, 17:56
|
#41 |
|
Супермодератор
 
Регистрация: 28.03.2009
Адрес: Ставрополь
Сообщений: 2,000
Поблагодарил: 2,044
Поблагодарили 2,608 раз за 1,093 сообщений
Репа: 2317 |
SPD6531 BQ-1403- Capri rus
Код:
Chinese Miracle II [SPD module] v 1.22 Operation : Read FullFlash [ v1.22 ] 1. Remove battery. Insert USB cable 2. Press and hold BootKey ( Skip, if use BootCable ) 3. Insert battery ==== Wait for phone... Phone found! [ 31 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending boot ... Boot Sent , starting... Boot Ver : Spreadtrum Boot Block version 1.2 Boot Ok CPU ID : 6531 , FDLStat : 0100 [0] Flash DIE : 00C8 0060 0016 0000 [0] Flash VEN : GigaDevice , GD25LQ32 [0] Flash CAP : 00400000 Read Flash Content Read Ok , collect info Set FileInfo : Model Vendor : BQ Model Name : 1403 Capri ExtInfo Data : rus Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32_rus__BQ-1403 Capri_2.bin Done! SPD6531_00400000_GD25LQ32_rus__BQ-1403 Capri_2.bin
__________________
Век живи, век учись..  
|
|
|
| Следующие пользователи поблагодарили yurii-62 за это сообщение: | renat_d (07.10.2016) |
|
12.10.2016, 11:45
|
#42 |
|
Супермодератор
 
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
ZTE Blade AF5 Прошивка Pac
Operation : Read FullFlash [ v1.22 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 7 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 7 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 7 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : P731A20 Model Brand : ZTE Model Device: P731A20 AndrVersion : 4.4.2 BaseBand CPU: SP7731GEA Project Ver : ZTE_Blade_AF5V1.0.0B03 Model Ext : ZTE T230 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731g_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.29.4_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x800.bin [Read Ok] : fblogo_480x800.bin [Read Ok] : boot.img [Read Ok] : system.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 1235 MiB Saved to : C:\Users\TIMUR\Desktop\SP7731GEA_P731A20_4.4.2_ZTE_Blade_AF5V1.0.0B03_ZTE_T230\ Done! Elapsed: 00:05:01 Reconnect Power/Cable! Код:
Target : SP7731GEA_P731A20_4.4.2_ZTE_Blade_AF5V1.0.0B03_ZTE_T230 Step #1 : Identify MEMORY : eMMC LAYOUT : eMMC NORMAL Step #2 : Select logic Select Logic : SC7731 Step #3 : Processing data Build PAC [ADD FILE] : nvitem_w.bin [ADD FILE] : nvitem_wcn.bin [ADD FILE] : prodnv.img [ADD FILE] : u-boot-spl-16k.bin [ADD FILE] : sc7731g_CP0_modem.bin [ADD FILE] : DSP_DM_Gx.bin [ADD FILE] : sc7731g_modem_CP2_WCN_14E_W15.29.4_Release.bin [ADD FILE] : logo_480x800.bin [ADD FILE] : fblogo_480x800.bin [ADD FILE] : boot.img [ADD FILE] : system.img [ADD FILE] : cache.img [ADD FILE] : recovery.img [ADD FILE] : userdata.img [ADD FILE] : u-boot.bin Build Ok! Result : 0x0017 Sign PAC ... Sign Ok! FW compiled! Elapsed: 00:02:29 Saved to : SP7731GEA_P731A20_4.4.2_ZTE_Blade_AF5V1.0.0B03_ZTE_T230.pac Done! |
|
|
|
|
28.10.2016, 21:05
|
#43 | |
|
Пользователь
Регистрация: 17.04.2016
Адрес: Болехів
Сообщений: 437
Поблагодарил: 265
Поблагодарили 543 раз за 269 сообщений
Репа: 6 |
Explay SL260
Цитата:
__________________
Никогда не бойся делать то, что ты не умеешь |
|
|
|
|
| Следующие пользователи поблагодарили uploads за это сообщение: | renat_d (28.10.2016) |
|
10.11.2016, 23:41
|
#44 | ||
|
Пользователь
Регистрация: 12.10.2013
Адрес: Земля
Сообщений: 64
Поблагодарил: 175
Поблагодарили 37 раз за 20 сообщений
Репа: 160 |
MTC SMART Start 3 ZTE BLADE L110 , SP Unlock [ v1.22 ]
Цитата:
Цитата:
|
||
|
|
|
|
17.11.2016, 17:43
|
#45 |
|
Супермодератор
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
BQ-7010G MAX SC5735C Прошивка
Operation : Read FullFlash [ v1.24 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC8830 Loader eMMC v1.1 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC8830 Loader eMMC v1.1 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC8830 Loader eMMC v1.1 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : BQ-7010G Model Brand : BQ Model Device: BQ-7010G AndrVersion : 4.4.2 BaseBand CPU: BQ-7010G Project Ver : BQ-7010G MAX-V1.0 Model Ext : BQ-7010G [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc8830_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo.bin [Read Ok] : fblogo_800x1280.bin [Read Ok] : boot.img [Read Ok] : system.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 844 MiB Saved to : C:\Users\TIMUR\Desktop\BQ-7010G_BQ-7010G_4.4.2_BQ-7010G_MAX-V1.0_BQ-7010G\ Done! Elapsed: 00:06:05 Reconnect Power/Cable! |
|
|
|
|
18.11.2016, 10:52
|
#46 |
|
Супермодератор
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
DIGMA Linx A400 3G SC7731C Прошивка
Код:
SLDR Load Ok BB CPU : SC7731C SC773c Rev5 For disable SLDR - select PAC or other SLDR or re-select CPU in settings tab! Operation : Read FullFlash [ v1.24 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : Linx_A400_3G Model Brand : DIGMA Model Device: LT4001PG AndrVersion : 5.1 BaseBand CPU: SP7731CEB Project Ver : GST_A10C_M10_K408CA_MF_V05_20160612 Model Ext : Linx A400 3G LT4001PG [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x800.bin [Read Ok] : fblogo_480x800.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : oem.img [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 1203 MiB Saved to : C:\Users\TIMUR\Desktop\SP7731CEB_LT4001PG_5.1_GST_A10C_M10_K408CA_MF_V05_20160612_Linx_A400_3G_LT4001PG\ Done! Elapsed: 00:08:32 Reconnect Power/Cable! Operation : Convert InfinitySC to SPRD PAC [ v1.24 ] Target : SP7731CEB_LT4001PG_5.1_GST_A10C_M10_K408CA_MF_V05_20160612_Linx_A400_3G_LT4001PG Step #1 : Identify MEMORY : eMMC LAYOUT : eMMC NORMAL Step #2 : Select logic Select Logic : SC7731 Step #3 : Processing data Build PAC [ADD FILE] : nvitem_w.bin [ADD FILE] : nvitem_wcn.bin [ADD FILE] : prodnv.img [ADD FILE] : u-boot-spl-16k.bin [ADD FILE] : sc7731C_CP0_modem.bin [ADD FILE] : DSP_DM_Gx.bin [ADD FILE] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin [ADD FILE] : logo_480x800.bin [ADD FILE] : fblogo_480x800.bin [ADD FILE] : boot.img [ADD FILE] : system.img [ADD FILE] : oem.img [ADD FILE] : sysinfo.img [ADD FILE] : cache.img [ADD FILE] : recovery.img [ADD FILE] : userdata.img [ADD FILE] : u-boot.bin Build Ok! Result : 0x0019 Sign PAC ... Sign Ok! FW compiled! Elapsed: 00:04:26 Saved to : SP7731CEB_LT4001PG_5.1_GST_A10C_M10_K408CA_MF_V05_20160612_Linx_A400_3G_LT4001PG.pac Done! |
|
|
|
|
18.11.2016, 12:48
|
#47 |
|
Супермодератор
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
Digma Plane 7004 3G Прошивка
Operation : Read FullFlash [ v1.24 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable PickUp loaders from pac FDL Ready! Boot Ver : Spreadtrum Boot Block version 1.1 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable PickUp loaders from pac FDL Ready! Boot Ver : Spreadtrum Boot Block version 1.1 Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable PickUp loaders from pac FDL Ready! Boot Ver : Spreadtrum Boot Block version 1.1 Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : sp7731geaplus_k03_cfgj_digma_64_8_dt Model Brand : DIGMA Model Device: scx35_sp7731gea_k03_cfgj_digma_64_8 AndrVersion : 5.1 BaseBand CPU: SP7731GEA_K03_CFGJ_DIGMA_64_8 Project Ver : LMY47D release-keys Model Ext : Plane 7004 3G PS7032PG [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731g_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_1024x600.bin [Read Ok] : boot.img [Read Ok] : system.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 1336 MiB Saved to : C:\Users\TIMUR\Desktop\SP7731GEA_K03_CFGJ_DIGMA_64_8_scx35_sp7731gea_k03_cfgj_digma_64_8_5.1_LMY47D_release-keys_Plane_7004_3G_PS7032PG_1218112016\ Done! Elapsed: 00:03:50 Reconnect Power/Cable! |
|
|
|
|
23.11.2016, 12:49
|
#48 |
|
Супермодератор
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
Fly FS509 Nimbus 9 SC7731C ПРОШИВКА
Код:
Chinese Miracle II [SPD module] v 1.24 SLDR Load Ok BB CPU : SC7731C SC773c Rev5 For disable SLDR - select PAC or other SLDR or re-select CPU in settings tab! Operation : Read FullFlash [ v1.24 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 24 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 24 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 24 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : FS509 Model Brand : Fly Model Device: Nimbus_9 AndrVersion : 6.0 BaseBand CPU: FLY Project Ver : SW08_FLY_FS509_2016_09_22 Model Ext : FS509 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_Trunk_W16.12.3_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x854.bin [Read Ok] : fblogo_480x854.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 2424 MiB Saved to : C:\Users\Public\Desktop\*****192;*****234;*****242;*****232;*****226;*****224;*****242;*****238;*****240;\FLY_Nimbus_9_6.0_SW08_FLY_FS509_2016_09_22_FS509\ Done! Elapsed: 00:16:16 Reconnect Power/Cable! |
|
|
|
|
25.11.2016, 14:26
|
#49 |
|
Супермодератор
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
DIGMA Optima 8002 3G TT8001PG Прошивка и NVram
Operation : Read FullFlash [ v1.24 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : k03_jlc_8inch_64_8_dt Model Brand : DIGMA Model Device: k03_jlc_8inch_64_8 AndrVersion : 5.1 BaseBand CPU: K03_JLC_8INCH_64_8 Project Ver : UNKNOWN release-keys Model Ext : Optima 8002 3G TT8001PG [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731g_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_800x1280.bin [Read Ok] : boot.img [Read Ok] : system.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 1336 MiB Saved to : C:\Users\TIMUR\Desktop\K03_JLC_8INCH_64_8_k03_jlc_8inch_64_8_5.1_UNKNOWN_release-keys_Optima_8002_3G_TT8001PG\ Done! Elapsed: 00:04:51 Reconnect Power/Cable! Operation : Read NV [ v1.24 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 43 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! Detected eMMC Flash , Structure detect Ok! Read GSM NV Read WCN NV Read Ok , 0x00029670 Saved to : C:\Users\TIMUR\Desktop\Optima 8002 3G\CX_SPDNV.spdnv Elapsed: 00:01:15 Reconnect Power/Cable! |
|
|
|
| Следующие пользователи поблагодарили gulka за это сообщение: | Dr_Wolodya (25.11.2016) |
|
02.12.2016, 14:08
|
#50 |
|
Супермодератор
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
Встретил FLY FS454 Nimbus 8 на SPD, везде он MTK
 Прочесть граф.ключ не смог , снес форматом Operation : Read PatternLock [ v1.24 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 24 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! FlashMode Set : Ok! Reading PatternLock ... PatternLock Not Set! Elapsed: 00:00:19 Reconnect Power/Cable! Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 24 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! FLASH : eMMC Flash , Structure : Ok! Reading extended info ... Model Name : FS454 Model Brand : Fly Model Device: Nimbus_8 AndrVersion : 6.0 BaseBand CPU: SP7731CEB CompileDate : 26.09.2016 6:35:43 Project Ver : SW05_FLY_FS454_2016_09_26 Model Ext : FS454 ExtraInfo : HWInfo exists!!! This phone have DYNAMIC HW settings!!! Elapsed: 00:00:22 Reconnect Power/Cable! Operation : Read FullFlash [ v1.24 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 24 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 24 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 24 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : Infinity SC773x eMMC v3 LDR Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : FS454 Model Brand : Fly Model Device: Nimbus_8 AndrVersion : 6.0 BaseBand CPU: SP7731CEB Project Ver : SW05_FLY_FS454_2016_09_26 Model Ext : FS454 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x854.bin [Read Ok] : fblogo_480x854.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Read Ok] : udc_config.bin [Build Ok] : userdata.img AndroidInfo created Firmware Size : 1886 MiB Saved to : C:\Users\TIMUR\Desktop\SP7731CEB_Nimbus_8_6.0_SW05_FLY_FS454_2016_09_26_FS454\ Done! Elapsed: 00:13:25 Reconnect Power/Cable! |
|
|
|
|
03.12.2016, 11:39
|
#51 | |
|
Пользователь
Регистрация: 17.04.2016
Адрес: Болехів
Сообщений: 437
Поблагодарил: 265
Поблагодарили 543 раз за 269 сообщений
Репа: 6 |
Prestigio Wize N3 PSP3507 DUO
Цитата:
__________________
Никогда не бойся делать то, что ты не умеешь |
|
|
|
|
| Следующие пользователи поблагодарили uploads за это сообщение: | OzyaXP (11.07.2017) |
|
09.01.2017, 12:36
|
#52 |
|
Пользователь
Регистрация: 06.05.2005
Адрес: Кыргызстан
Сообщений: 82
Поблагодарил: 179
Поблагодарили 113 раз за 40 сообщений
Репа: 83 |
Успешное применение, без комментариев [InfinityBox CM2 SPD]
Beeline Smart 7 Q327 сброс FRP
Код:
Operation : Format File System / Reset Settings [ v1.24 ] Settings : SmartFormat is On 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 8 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! eMMC phone detected! Will use 'Safe Format' mode! Mount : /data Size : 0x0000000071CF7000 State : 0x0001 Mount : /cache Size : 0x0000000009600000 State : 0x0001 Prepare Ok! Format Ok! Don't touch phone, until it fully bootup to "Welcome Screen"! Android 5.x : Reset FRP Lock Reset Ok! Done! Elapsed: 00:01:01 Reconnect Power/Cable! |
|
|
|
| Следующие пользователи поблагодарили leomin за это сообщение: | JayDi (10.01.2017) |
|
10.01.2017, 10:01
|
#53 |
|
Пользователь
Регистрация: 06.05.2005
Адрес: Кыргызстан
Сообщений: 82
Поблагодарил: 179
Поблагодарили 113 раз за 40 сообщений
Репа: 83 |
Попадаются все гаджеты на процессоре Spreadtrum SC7731, с ними СМ2 справляется на ура.
Supra M74AG формат. Код:
Operation : Format File System / Reset Settings [ v1.24 ] Settings : SmartFormat is On 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 8 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! eMMC phone detected! Will use 'Safe Format' mode! Mount : /data Size : 0x000000005DBFB000 State : 0x0001 Mount : /cache Size : 0x0000000009600000 State : 0x0001 Prepare Ok! Format Ok! Don't touch phone, until it fully bootup to "Welcome Screen"! Done! Elapsed: 00:00:43 Reconnect Power/Cable! |
|
|
|
| Следующие пользователи поблагодарили leomin за это сообщение: | JayDi (10.01.2017) |
|
13.01.2017, 10:48
|
#54 |
|
Супермодератор
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
BQ-7021G HIT Прошивка
Operation : Read FullFlash [ v1.24 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 34 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 34 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 34 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : BQ-7021G Model Brand : BQ Model Device: BQ-7021G AndrVersion : 5.1 BaseBand CPU: BQ-7021G Project Ver : s719b_cuser_20161117 Model Ext : BQ-7021G [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : nvitem_w.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : sc7731g_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.26.2_Release.bin [Read Ok] : logo_800x1280.bin [Read Ok] : fblogo_800x1280.bin [Read Ok] : boot.img [Read Ok] : system.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 1240 MiB Saved to : C:\Users\TIMUR\Desktop\BQ-7021G_BQ-7021G_5.1_s719b_cuser_20161117_BQ-7021G\ Done! Elapsed: 00:04:46 Reconnect Power/Cable! |
|
|
|
|
13.01.2017, 17:29
|
#55 | |
|
Пользователь
Регистрация: 01.04.2006
Адрес: Россия
Сообщений: 339
Поблагодарил: 68
Поблагодарили 72 раз за 37 сообщений
Репа: 38 |
Irbis TX35
Цитата:
|
|
|
|
|
|
13.01.2017, 22:19
|
#56 | |
|
Пользователь
Регистрация: 17.04.2016
Адрес: Болехів
Сообщений: 437
Поблагодарил: 265
Поблагодарили 543 раз за 269 сообщений
Репа: 6 |
Prestigio PSP3503
Цитата:
__________________
Никогда не бойся делать то, что ты не умеешь |
|
|
|
|
|
17.01.2017, 10:44
|
#57 |
|
Новичок
Регистрация: 16.01.2006
Адрес: Украина
Сообщений: 18
Поблагодарил: 1
Поблагодарили 12 раз за 5 сообщений
Репа: 0 |
Prestigio PSP3403DUO
Сброс графического ключа
Код:
Operation : Format File System / Reset Settings [ v1.24 ] Settings : SmartFormat is On 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 69 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! eMMC phone detected! Will use 'Safe Format' mode! Mount : /data Size : 0x00000000801F7000 State : 0x0001 Mount : /cache Size : 0x0000000013600000 State : 0x0001 Prepare Ok! Format Ok! Don't touch phone, until it fully bootup to "Welcome Screen"! Android 5.x : Reset FRP Lock Reset Ok! Done! Elapsed: 00:00:22 Чтение FullFlash Код:
Operation : Read FullFlash [ v1.24 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 69 ] Port Opened Sync... Initial Boot Failed! Reconnect Power/Cable! Operation : Read FullFlash [ v1.24 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 69 ] Port Opened Sync... Initial Boot Failed! Reconnect Power/Cable! Operation : Read FullFlash [ v1.24 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 69 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 69 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 69 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : PSP3403DUO Model Brand : Prestigio Model Device: GF40B1G AndrVersion : 5.1 BaseBand CPU: SC7731G Project Ver : PSP3403DUO.20160903.1.0.12 Model Ext : PSP3403DUO [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731g_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.43.3_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x800.bin [Read Ok] : fblogo_480x800.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : oem.img [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 1380 MiB Saved to : E:\SC7731G_GF40B1G_5.1_PSP3403DUO.20160903.1.0.12_PSP3403DUO\ Done! Elapsed: 00:09:40 Последний раз редактировалось jblack; 17.01.2017 в 15:20. |
|
|
|
|
17.01.2017, 15:26
|
#58 |
|
Администратор
Регистрация: 02.08.2004
Адрес: Тридевятое царство
Сообщений: 2,210
Поблагодарил: 1,130
Поблагодарили 2,422 раз за 1,091 сообщений
Репа: 1993 |
Парни прячьте логи под теги [SPOILER] или хотя бы [CODE], а то не удобно просматривать темы, кому нужно тот раскроет и посмотрит.
__________________
В правильно поставленном вопросе содержится большая часть ответа. 
|
|
|
|
| Следующие 4 пользователей поблагодарили jblack за это сообщение: |
|
20.01.2017, 11:16
|
#59 |
|
Новичок
Регистрация: 16.01.2006
Адрес: Украина
Сообщений: 18
Поблагодарил: 1
Поблагодарили 12 раз за 5 сообщений
Репа: 0 |
S-TELL C555 scx35_s7358_qhd
Operation : Check/Read Info [ v1.24 ]
Operation : Read FullFlash [ v1.24 ]
Operation : Flash [ v1.24 ]
|
|
|
|
|
20.01.2017, 23:33
|
#60 | |
|
Новичок
Регистрация: 21.12.2005
Сообщений: 12
Поблагодарил: 1
Поблагодарили 2 раз в одном сообщении
Репа: 0 |
Цитата:
Чтение инфо без галки Alt Ldr
Чтение инфо с галкой Alt Ldr
Чтение прошивки без галки Alt Ldr
|
|
|
|
|
|
|
|
Похожие темы
|
||||
| Тема | Автор | Раздел | Ответов | Последнее сообщение |
| Обновление ПО для NCK Dongle / NCK Box | serpas007 | NCK Dongle / NCK Box Team | 184 | 18.02.2023 23:16 |
| Успешное применение, без комментариев [CM2MTK MediaTek] | yurii-62 | Infinity Box | 316 | 26.08.2022 00:51 |
| Успешное применение Medusa | fedja | Medusa JTAG Box | 0 | 06.12.2016 23:22 |
| Применение Infinity PinFinder без карты infinity | Romych78 | Infinity Box | 5 | 04.02.2009 12:14 |
Линейный вид
