Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2)

[iglashkov]

NVRAM Fly FS451 .spdnv [v1.24]

[iglashkov]

NVRAM Oysters T72 3G .spnv [v1.58]

[andrik]

X5 MAX

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : F40122426977696E201000005F5483C9
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E201000005F5483C9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID : 0x135E2F9D3DD0D4BBC6917664CEC828DE
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P9_1_wg_n

NVM Read Ok, Doogee_x5_max_MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V 57_P9_1_wg_n_eMMC.spnv

Done!
Elapsed: 00:00:39
Reconnect Power/Cable!

[citycom]

MT6582__Keener__K-8G__K-8G__4.2.2__ALPS.JB5.TABLET.MP.V1

[iglashkov]

NVRAM Micromax A106 .spnv [v1.58]

[kirill@88]

PHP код:

Brand     : N8000
ProdName  : N8000
ProdModel : N8000
Device    : N8000
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : LH.86V.2G 


[motokmips]

Alcatel_7041D_MT6582_eMMC NVRAM

[slavkinj]

Read Firmware CM2 V1.58

Wait for phone...
Phone found! [ 11 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030303447393010D55AE54A51D9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393010D55AE54A51D9
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE3AD6EB6C922ED71B7C19F5E89
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : 3G5
ProdName : 3G5
ProdModel : 3G5
Device : 3G5
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : SW_98056C_W15_FWVGA_SPLASH_V007

[Read Ok] : preloader_wt98056.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / wt98056 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 691 MiB

[uploads]

ECOO-E04-3GB+MT6753

лог

Operation : Read NVRAM [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 112 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 5200011541423133067506428B0F3FF4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BAB13
[eMMC] : FLASH_CID : 150100523331424142067506F43F828B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xCD5A1551DDEAB2EAF58C4C736F6C7688
INT RAM : 0x00020000
EXT RAM : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P1_1_lwg_ n

NVM Read Ok, MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P1_1_lwg_ n_eMMC.spnv

Done!
Elapsed: 00:00:44
Reconnect Power/Cable!

[slavkinj]

Read Firmware CM2 V1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 7 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : E3CB875FBA927C3B464D7C49E21FF7AA
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DF , [WINBOND] W25Q64DW
[0] : FLASH_DIE : 00EF 0060 0017 0000
[0] : FLASH_LEN : 0x00800000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info : L6105_HUADOO_H1_UKRAINIAN_PCB01_gprs_MT6261_S00.BR AVIS_UKRAINIAN_V1_00.bin
FileVersion : BRAVIS_Ukrainian_V1.00

[ScatCFG] : MT6261 / BRAVIS_Ukrainian_V1.00 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK_1.58\Read_out\L6105_HUADOO_H 1_UKRAINIAN_PCB01_gprs_MT6261_S00\

Done!

[uploads]

Samsung N900

лог

Operation : Read NVRAM [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 90 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50305858585810C16A2EB18061
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , XXXX0
[eMMC] : FLASH_CID : FE014E50305858585810C16A2EB18061
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xCD5A15514F9238EDD5A9E53E080F2850
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

NVM Read Ok, MT6572_eMMC.spnv

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!

[deezee]

ICONBIT NT-3805C NVRAM

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 32 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6583
BB_CPU_NME : [MediaTek] MT6583|6589_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x86
NAND Flash : NOT INSTALLED
eMMC Flash : 4D0001703830434DBA0703474F905878
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G80CM
[eMMC] : FLASH_CID : 7001004D4D433038470307BA7858904F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001D5400000
[eMMC] : FLASH_UCP : 7508 MiB [eMMC 8 GiB]
DEV RID    : 0x2C36287631C68F3305599FBD5C80BB95
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V10_P9

NVM Read Ok, ICONBIT_NT-3805C_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V10_P9_eMMC.spnv

Done!
Elapsed: 00:01:00
Reconnect Power/Cable!

[motokmips]

Mikromax_AQ5001_MT6582_S00_MOLY_WR8_W1449_MD_WG_MP _V1_eMMC

[fedja]

X-BO V12 MT6572_eMMC.spnv

[Mumang]

Philips E160 SPD6531.

[yurii-62]

MT6735_Micromax Q479

Brand : Micromax
ProdName : Q479
ProdModel : Micromax Q479
Device : Q479
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : alps-mp-m0.mp1-V2.39.1_tx6735m.65u.m0_P14

NVM , MT6735_Micromax Q479_S00_MOLY_LR9_W1444_MD_LWTG_MP_V79_P4_1_lwg_n_ eMMC.spnv

[andrik]

5550

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513758534142018033E8C9916F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 150100513758534142018033E8C9916F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x135E2F9DF6B2CF4CE628CF8EE479B778
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_P12_1_wg_n

NVM Read Ok, PSP5550_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_P12 _1_wg_n_eMMC.spnv

Done!
Elapsed: 00:00:48
Reconnect Power/Cable!

[renat_d]

Philips E1500 FW

A_TEAM_PCB01_gprs_MT6250_S00

[Тох]

Здравствуйте, есть у кого NVRAM
от Prestigio MultiPad WIZE 3011/3021/3031

[andrik]

read

Operation : Read NV [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 49 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0x0002CCA0
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\Lenovo_A1900.s pdnv

Elapsed: 00:00:43

Reconnect Power/Cable!