Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2)

[yurii-62]

MT6261-BQM-1802 Arlon
Flash: T06_BRIGHTQUICK_PCB01_gprs_MT6261_S00.A6118_YT_T06 _V01.bin

Operation : Read Flash [ v1.34 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 104 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : 0000
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 01BAE73B9F4D641F42DE1EFFA0890B1C
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000 
[0] : FLASH_LEN : 0x00300000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : Not exists
Reading Flash Conent now ... 

Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info   : T06_BRIGHTQUICK_PCB01_gprs_MT6261_S00.A6118_YT_T06_V01.bin
FileVersion : A6118_YT_T06_V01
Saved to : C:\InfinityBox\CM2MTK\Read_out\T06_BRIGHTQUICK_PCB01_gprs_MT6261_S00.A6118_YT_T06_V01.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

[gulka]

Explay Rio Play NV

Operation : Read NVRAM [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040509A1540081ED
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040509A1540081ED
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6571_S00_MOLY_WR8_W1315_MD_WG_MP_V43_1_2g_n
Read Ok, MT6571_S00_MOLY_WR8_W1315_MD_WG_MP_V43_1_2g_n_eMMC.spnv saved

Done!
Elapsed: 00:00:35
Reconnect Power/Cable!

[gulka]

HTC desire 210

Check / Read Info [ v1.35 ]

Chinese Miracle II [MTK module] v 1.35

Operation : Check / Read Info [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CDE44222517B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CDE44222517B
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : htc
ProdName : HTC_Eroupe
ProdModel : HTC Desire 210 dual sim
Device : htc_v0_dug
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : SW_G98520A7_V014_M20_HTC_V0_EUROPE_QMR

MODEM :
BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P44_1_wg_n

EXTRA :
LCD [0] : ili9806c_dsi_vdo
LCD Res : 800x480
TOUCH [0] : msg2133
CAM [0] : nt99252_yuv
CAM [1] : ov5645_mipi_yuv
CAM [2] : gc0329_yuv
MODEM : wingtech72_wet_jb3_hspa_wt_pa_sky77590_band18_std_ no850_europe
LOCALE : ru_RU en_US uk_UA hy_AM kk_KZ tr_TR hdpi

Done!
Elapsed: 00:00:31
Reconnect Power/Cable!

Operation : Read Flash [ v1.35 ]

Operation : Read Flash [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CDE44222517B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CDE44222517B
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...
USBDL : Init HSUSB Ok!

Brand : htc
ProdName : HTC_Eroupe
ProdModel : HTC Desire 210 dual sim
Device : htc_v0_dug
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : SW_G98520A7_V014_M20_HTC_V0_EUROPE_QMR

[Read Ok] : preloader_wt98520.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : blinkfeed.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / wt98520 / EMMC
FW Size : 1267 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__htc__HTC Desire 210 dual sim__htc_v0_dug__4.2.2__SW_G98520A7_V014_M20_HTC_V 0_EUROPE_QMR\

All done!

Done!
Elapsed: 00:05:40
Reconnect Power/Cable!

Operation : Read NVRAM [ v1.35 ]

Operation : Read NVRAM [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CDE44222517B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CDE44222517B
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P44_1_wg_n
Read Ok, MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P44_1_wg_n_e MMC.spnv saved

Done!
Elapsed: 00:00:44
Reconnect Power/Cable!

Operation : Repair Security [ v1.35 ]

Operation : Repair Security [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CDE44222517B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CDE44222517B
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

IMEI [00] : 353131066958105
IMEI [01] : 353131066958113
IMEI [02] : 135790246811220
IMEI [03] : 135790246811220

Set IMEI [00] : 911245005411243
Set IMEI [01] : 911245005400238
Prepare finished. Security check required!

Wait for phone...
Phone found! [ 23 ]
Sync...
PostCheck Ok! Repair done!

Done!
Elapsed: 00:00:48
Reconnect Power/Cable!

Operation : Flash [ v1.35 ]

Scatter Load Ok , BaseBand : MT6572 , Project : wt98520 , Storage : EMMC
Files found : 13 , Set to Flash : 12
Ready to Flash!

Operation : Flash [ v1.35 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CDE44222517B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CDE44222517B
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : wt98520 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled

Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 4116 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 3
Erase : 0x0000000000600000-0x0000000000100000
Erase : 0x0000000002300000-0x0000000002AC0000
Erase : 0x00000000053C0000-0x00000000E5BC0000
Flash Pre-Erase Done, time used : 00:00:14

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_wt98520.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0015
Update PMT by user request
Repartition Done!

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : BLINKFEED
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:03:17

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : EBR2
Verify Passed : BLINKFEED
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:49

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:04:48
Reconnect Power/Cable!

NVRAM и считаный FLASH под SPFT