CM2 MTK/MediaTek - МТ 6572 висит на 70 мА

[yurii-62]

ICM2 MTK/MediaTek v1.02. МТ 6572

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8C00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending 
NAND_ID : 00AD00BC00900055005600AD00BC0000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
Configure emi settings
DA Sent. Configure setting now ... 

При попытке считать информацию с ТА. прога зависает на на считывании (DA Sent. Configure setting now ... ) висит пока ТА не отключу от компа.

NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0000 , [SAMSUNG] K9F5608Q0C
[NAND] : FLASH_DIE : 0000 0000 0000 0000 0000 0000 0000
[NAND] : FLASH_LEN : 0x00000000
INT RAM : 0x00000000
EXT RAM : 0x00000000
BOOT TYPE : DONE
SOC VERIFY : 00
Boot Ok!
Info read not done Erased phone or unsupported FlashIc?
Done!

После отключения ТА в окне появляется вот такая инфа.
__________________________________________________ _______________

[MediaTek] MT6583 попытка считать инфу. (ТА LENOVO P780)

Operation : Check / Read Info [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 62 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
Error : Correct DA sequence not found for target!
Boot Error!

Operation Failed
Elapsed: 00:00:39
Reconnect Power/Cable!