Восстановление boot на i9070 и i9070p - GSM Форум

MasterDDD · 11.01.2013, 17:16

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9070 V1.0.4705.16773]

Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #1: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #2: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #3: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #4: ID = 0x00000001, IR Length = 0x02 bits
Total IR length: 0x0006 bits

вот что пишет, когда жмёшь на анализ цепочки

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9070 V1.0.4705.16773]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x59): Communication is not established. Terminating.

это не рессурект

в смысле глянь на DLL ?

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
Платформы и устройства, поддерживаемые RIFF BOX JTAG	levsha	RIFF Box JTAG	3	25.08.2012 12:27
Восстановление мертвого загрузчика (dead Boot) Хмельницкий	XaGoluyXa	Услуги	0	25.01.2012 19:54
Medusa JTAG Box: Модели и функционал данного программатора	DB2020_Logs	Medusa JTAG Box	0	26.10.2011 01:01
Восстанавливаю PDA, телефоны с поврежденным boot в Ставропольском крае.	LASDORF	Услуги	0	30.11.2010 19:36
NOKIA N96 Error reading CMT flash id...	ShandrapaY	Nokia BB5 - программный ремонт	23	29.11.2008 13:26

11.01.2013, 17:16	#8
MasterDDD Пользователь Регистрация: 17.08.2006 Адрес: Belarus Сообщений: 67 Поблагодарил: 133 Поблагодарили 49 раз за 30 сообщений Репа: 27	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9070 V1.0.4705.16773] Connecting to the target...OK Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz Following devices are found on the JTAG chain: Device on TAP #0: ID = 0xFFFFFFFF, IR Length = 0x01 bits Device on TAP #1: ID = 0xFFFFFFFF, IR Length = 0x01 bits Device on TAP #2: ID = 0xFFFFFFFF, IR Length = 0x01 bits Device on TAP #3: ID = 0xFFFFFFFF, IR Length = 0x01 bits Device on TAP #4: ID = 0x00000001, IR Length = 0x02 bits Total IR length: 0x0006 bits вот что пишет, когда жмёшь на анализ цепочки Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9070 V1.0.4705.16773] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x59): Communication is not established. Terminating. это не рессурект в смысле глянь на DLL ?