Восстановление boot на i9070 и i9070p

[haydeGen]

в смысле переключить язык интерфейса в проге рифа?

ага

только перейди на вкладку запись / чтение, получи ID, инфу о ТА,

на dll i9070 и P


Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9070 V1.0.4705.16773]

Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x4BA00477, IR Length = 0x05 bits
Device on TAP #1: ID = 0xFFFFFFCF, IR Length = 0x01 bits
Device on TAP #2: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #3: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #4: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #5: ID = 0x000000FF, IR Length = 0x01 bits
Total IR length: 0x000A bits

Analizing IDCODE(s) of the JTAG scan chain:
1. 0x4BA00477: Samsung S5PV300
2. 0x4BA00477: NovaThor U8500
3. 0x4BA00477: Generic CORTEX-A9