Philips Xenium X126 код пользователя.

[vitalew79]

Подтверждаю, прошивка снимает код блокировки. Припаивался на плату так как вариант по USB не проходит.

LOG

Device synchronized.
Boot-loader is active
EBL version: XMM1100_RAM_Bootloader 11..0
Boot mode is: BB
Using: Faster CRC, Writing all blocks
Package length is 2048
Baud rate set to 921600
Get flash id.
CFI stage 1
Flash ID is: 401600EF
CFI stage 2
Boot process finished

Start downloading item 'CODE:XMM1100_32M_SafeMode.fls'' from file 'E:\Mobiles\PHILIPS\Firmware\Philips X126\X126_I1100D_1151_XX_V38A_RU\XMM1100_32M_SafeM ode.fls''.
Erasing the dynamic eeprom area
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Load region 1
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0xD1C2)
Verify OK
Process time was 1 min 30 sec.

Start downloading item 'STAT EEP:../HW/EGVV3/XMM1100D_SF.eep'' from file 'E:\Mobiles\PHILIPS\Firmware\Philips X126\X126_I1100D_1151_XX_V38A_RU\XMM1100D_SF.eep'' .
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending end-pack.
Checksum OK (0x636D)
Verify OK
Process time was 296 msec.

Start downloading item 'DYNAMIC_FFS:XMM1100_FFSlite00010.007.dffs'' from file 'E:\Mobiles\PHILIPS\Firmware\Philips X126\X126_I1100D_1151_XX_V38A_RU\XMM1100_SF_32M_FF Slite00010.007.dffs''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0xC000)
Verify OK
Process time was 13.3 sec.

Start downloading item 'CUST:../HW/EGVV3/cust_package_rct.cust'' from file 'E:\Mobiles\PHILIPS\Firmware\Philips X126\X126_I1100D_1151_XX_V38A_RU\cust_package_rct. cust''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0xF449)
Verify OK
Process time was 19.9 sec.

Total time was 2 min 7 sec.
Channel 1 is succesfully closed.

[Gervant]

Прошил все файлы, код снялся, шил припаиваясь к пятакам, кабель от инфинити, и инфинити же в качестве порта.