W800 шьется, но не включаеться...

[Brock]

Автор оригинала the_laser

универсальное решение для любых проблем...

1. рековери
2. льем frec\k750gdfs.bin + format gdfs (анлок произойдет автоматом)
3. льем erom
4. льем main+fsimage+complete
5. для красоты делаем change cid red36
6. вынимаем мемористик, вынимаем симу, включаем, ждем "insert sim". выключаем.
аппарат готов.


А вот такой пример:

GUI v0.9137285/UNI
standalone version engaged.
Card serial:00000xxx
Loaded 49 flash descriptors
RECOVERY MODE STARTED
Open COM port OK
Loader:050726 1532 NPA4_CXC1326739_SEMC_COMPACTCERTLOADER R1A
Fetching phone data from OTP
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35655200627326 CERT:BROWN
CURRENT FLASH FILE CID:36
SSW uses dynamic hash, dynamic hash len is:1
Will flash 1 blocks...
SSW loading returns:0
Recovery succefull. Reflash phone now
Elapsed:3 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
FLASH CID detected:36
PHONE IS RED RETAIL PRODUCT
Speed:921600
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35655200627326 CERT:RED
Open COM port OK
ChipID:8040,EMP protocol:0301
FLASH CID detected:36
PHONE IS BROWN
Speed:921600
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35655200627326 CERT:BROWN
Loader:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
Setting up GDFS...
format gdfs complete.
will write 1310 variables
done
Phone detached
Elapsed:47 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
FLASH CID detected:36
PHONE IS BROWN
Speed:921600
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35655200627326 CERT:BROWN
Loader:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
Flashing MAIN firmware:\CELL\_SETool\SE\K750\k750ret_erom.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:1
Will flash 1 blocks...
SSW loading returns:0
Elapsed:11 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
FLASH CID detected:36
PHONE IS BROWN
Speed:921600
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35655200627326 CERT:BROWN
Loader:041214 0816 LLECXC1326743_COMPACTPRODUCTION R2AB
Flash ID check:200D
Flash props sent ok
Flashing MAIN firmware:\CELL\_SETool\SE\K750\R1L002\k750r1l_ma in_euro.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:282
Will flash 282 blocks...
SSW loading returns:0
Flashing FS image:\CELL\_SETool\SE\K750\R1L002\k750r1l_fs.em ea1.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:161
Will flash 161 blocks...
SSW loading returns:0
Don't forget check complete !
CID changed succefully.
Open COM port OK
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35655200627326 CERT:RED
CSloader version:
050503 2001 NPACXC1327364_COMPACT_SEMC_CS_LOADER__R3E
loader startup: executed
loader filesystem startup: executed
loader gdfs startup: executed
loader unlock: executed
writing customize.xml
writing C3_PCA_G3v2.cer
writing GTE_CyberTrust_Root.cer
writing Root.cer
writing ThawteServerCA.cer
writing Binary_SSL_CA_Cert.der
writing Entrust.net_WTLS_Root_Certificate.wcrt
writing GlobalSign_Root_CA_WTLS.wcrt
writing GTE_Cybe_Trust_Root_WTLS.wcrt
writing Verisign_Class_3_CA_WTLS.wcrt
Phone detached
Elapsed:515 secs.

если висит на плиз вейт
шьете гдфс и делаете анлок.....
90 процентов помогает
если не помогло

1. меняем цид на ред 36
2 recovery
3 шьем db2010red36_erom.ssw, как основной мейн файл
4. перешиваем - мейн+фс+касомизация+анлок

радуемся