iPhone(SciPhone,CECT) i68, i68+, i9, i9+, i9+++ - вопросы и ответы.

[papsi]

Сообщение от brandonlee

Hi papsi,
Thanks for your help. the phone still white screen and no way to fix it with flashing. Maybe come with a defective screen.
Look here two image, 1:formating it manually and 2: flashing it.
http://avarcade.funpic.de/v8650/format.jpg
http://avarcade.funpic.de/v8650/flash.jpg

One question: Why your firmware is only 32mb but when I make a backup of my cellphone is 66mb?
Thanks for all your help,
Best regards!

Hi brandonlee. First what i see , that you dont domnload the AUTHentication file in flashtoolsettings. It is nessesary to do it. press this button and choise the MTK Allinone DA. bin file. This file is in the some folder with flashtool.
Next look at you images. FORMAT-look at end address. You need to set start 0x00000000 end length 0x04000000.. i thing you format was very quickly,because of wrong end address. it must be about 4-5 min.
About 36Mb. Masterfull content only firmware, with out file system and any changes(accounts, sms settings, mms settings and others). You have fullflash file (you read it from phone), it is 66Mb, but here is file system and all changes. Normally get masterfull from fullflash, but it is nessesary to have programm, which can do it.

So
You need to do correctly FORMAT
After that try again to flashing masterfull
Good luck
I need screenshot from format settings page

In my image i have formatsettings(start and lenght)

[brandonlee]

Сообщение от papsi

Hi brandonlee. First what i see , that you dont domnload the AUTHentication file in flashtoolsettings. It is nessesary to do it. press this button and choise the MTK Allinone DA. bin file. This file is in the some folder with flashtool.
Next look at you images. FORMAT-look at end address. You need to set start 0x00000000 end length 0x04000000.. i thing you format was very quickly,because of wrong end address. it must be about 4-5 min.
About 36Mb. Masterfull content only firmware, with out file system and any changes(accounts, sms settings, mms settings and others). You have fullflash file (you read it from phone), it is 66Mb, but here is file system and all changes. Normally get masterfull from fullflash, but it is nessesary to have programm, which can do it.

So
You need to do correctly FORMAT
After that try again to flashing masterfull
Good luck
I need screenshot from format settings page

In my image i have formatsettings(start and lenght)

yes, I did all the steps you told me included the start and lenght adrress selecting manual format and the validation mode.
Now I'm in my job but later when I go to my home, I will try again and show you some screenshots.
Thanks for your continued help and sorry if I bother you
Regards!

[Yurikse]

Сообщение от brandonlee

yes, I did all the steps you told me included the start and lenght adrress selecting manual format and the validation mode.
Now I'm in my job but later when I go to my home, I will try again and show you some screenshots.
Thanks for your continued help and sorry if I bother you
Regards!

Do you write down bekap or masterfull in a telephone????? It is needed to write down masterfull, if write down the bekap, then telephone will not work. And no actions with a telephone, not able to recover him, only record of masterful!!!!!!!!!!!!!!!!!!!!