LG GT540 не прошивается full с рифом

[Elshad]

Проблема решилась с Рифом Full записал
с ошибками до конца и телефон включился

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.18, JTAG Manager Version: 1.26
Selected Resurrector: *****91;LG GT540*****93;

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: *****91;Sample at MAX*****93;

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)

Resuming write FLASH1 memory from 0x00000000 to 0x1FFFFFFF on 0x09880000
WARNING: Programming Error (0x24) at 0x109A0000. Attempting to Repeat.
WARNING: Programming Error (0x24) at 0x109A0000. Attempting to Repeat.
WARNING: Programming Error (0x24) at 0x109A0000 is Ignored.OK
WARNING: Programming Error (0x24) at 0x12A80000. Attempting to Repeat.
WARNING: Programming Error (0x24) at 0x12A80000. Attempting to Repeat.
WARNING: Programming Error (0x24) at 0x12A80000 is Ignored.
WARNING: Programming Error (0x24) at 0x12DA0000 is Ignored.
WARNING: Programming Error (0x24) at 0x14700000. Attempting to Repeat.
WARNING: Programming Error (0x24) at 0x14700000 is Ignored.
Completed in 00:51:16.047 (Average Transfer Rate: 175.77 kB/s)

не нужна была исправить imei ,imei тоже
нормально сеть тоже, Все работает