BB5 Easy Service Tool - кто пользуеться ?

[haydeGen]

будешь приятно удивлен

ага! думаю дай проверю...

MT-BOX

CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&16d2b07a&2&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
BCM21351_usb2nd.fg
Sending ULO code
BCM21351_XSR16_usbalg.fg
Pooling for device removal...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&16d2b07a&2&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
CMT Certificates
NPC 0x0200
HWC 0x0100
CCC 0x0200
C:\Program Files\GriffinTeam\MT-Box\rpls\352699046825496_0.rpl
Erase[117.00 MB]...
erasing RAP [00000000 to 0001FFFF]
erasing RAP [00020000 to 000203FF]
erasing RAP [00060000 to 011BFFFF]
erasing RAP [011C0000 to 01CFFFFF]
erasing RAP [02500000 to 028FFFFF]
erasing RAP [02900000 to 0753FFFF]
erasing RAP [01D00000 to 024FFFFF]
in 1.47s
Flash[26.74 MB]...in 5.28s
* * Processed file in 32.89 seconds
Processing File: rm618__04.90.image_i_059B6L0_002
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&16d2b07a&2&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[18.06 MB]...in 3.67s
* * Processed file in 3.69 seconds
Processing File: rm618__04.90.ppm_i
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&16d2b07a&2&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[5.94 MB]...in 1.16s
* * Processed file in 1.17 seconds
Restarting device...
Pooling for device removal...
Pooling for device removal...
Device disconnected.
* * * Phone flashing done in 0:37 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 04.90/28-09-10/RM-618 (c) Nokia
IMEI: 352699046825496
Factory Default Settings...OK

BB5 Easy Service Tool

Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm618__04.90.mcusw
PPM : rm618__04.90.ppm_i
CNT : rm618__04.90.image_i_059B6L0_002
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000000000000022000509200C0000
EM0 ID: 00005361
PUBLIC ID: 0000000000C1E2486E898EBE8833CCF2FD990D80
ASIC MODE ID: 00
ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
ROM ID: DE56D582BDDE7A3A
Use BCM21351_usb2nd.fg Rev : 2.1 Ver : 10.46.0
Processing RAWLOADER...
FLIC : 00300020
Req : XSR 1.6
Use BCM21351_XSR16_usbalg.fg Rev : 2.1 Ver : 10.46.0
Boot Done!
TIME : Boot time : 00:00:00
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 352699046825496
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : X:\box gsm\infinity\setup infinity\BEST_v1.14.1\Backup\Cert\352699046825496_ CRT.rpl

===Flashing [MCU]===
Erase : Processing rm618__04.90.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm618__04.90.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [UPDAPP]
Total writen 506 blocks
TIME : Write time : 00:00:06
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [PPM]===
Erase : Processing rm618__04.90.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm618__04.90.ppm_i
Total writen 109 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [CNT]===
Erase : Processing rm618__04.90.image_i_059B6L0_002
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm618__04.90.image_i_059B6L0_002
Total writen 331 blocks
TIME : Write time : 00:00:04
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:15
Reboot phone now...

Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:00:53

Флеширование на Х2 в два раза быстрее, но с учетом перехода в LM и FF получается на две, три секунды

[Evil]

haydeGen, у меня Х2 шьется 8 секунд, откуда у тебя минута я не знаю.