Телефоны, восстановленные с помощью RIFF box

[levsha]

Восстановление Samsung Galaxy S i9000 при помощи RIFF box JTAG:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.14, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I9000]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 18 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

[Despedo]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung i710]

Connecting to the dead body...OK
Detected dead body ID: 0x79265013 - CORRECT!
Set I/O Voltage reads as 2.99V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0034 (128MB)
Flashing the dead body...OK
Resurrection complete!

[MasterDDD]

Тело пришло не включайкой, решил подкинуть на RIFF, вот что вышло.
После тело прошил и всё гуддд.

[tobiko1]

Samsung i8510 пришёл с убитой модемной частью ,PDA часть была в норме (ради эксперимента восстановил и её).

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [Samsung i8510 Modem]

Connecting to the dead body...OK
Detected dead body ID: 0xA00C00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0076 (64MB)
Flashing the dead body...OK
Resurrection complete!

-------------------------------------------------------------


Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [Samsung i8510 PDA]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3602F - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0040 (256MB)
Flashing the dead body...OK
Resurrection complete!

[igan]

HTC diamond, свап основной платы прошёл успешно. Из-за несовместимости платы клавиатуры и основной платы, тело ничем не шилось, висло с ошибкой при старте. Рифом пришлось лить патченный бут. После кнопки "воскрешние" diamond ожил.

[LASDORF]

Сегодня возвращал к жизни Samsung I8000 с уваленым майстерами boot'ом.

За неимением родного АКБ от аппарата, запитывал плату с припаянными к ней сигнальными проводами, от БП. В Мануале по восстановлению этой модели говорится, что процесс доолжен проходить с использованием родного АКБ, тем не менее...

Лог удачного восстановления:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [Samsung I8000]

Connecting to the dead body...OK
Detected dead body ID: 0x07B76F0F - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0058 (512MB)
Flashing the dead body...OK
Resurrection complete!