Nokia N5000 после неудачной прошивки

[osya]

Сообщение от osya

Прошил ТА ошибочно в 2760. Теперь при прошивке в N5000 припопытке рапаковки контента пишет content extrakt .... faild.
Как поднять такое тело. Перешивал и mt-box, jaf, cyclone, HWK - ничего недает....

Вот лог стирания и прошивки

Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V 
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 4Kbits
Flashbus Write baud set to 1.0Mbits
Erasing NOR Region [0x01000000-0x02FFFFFF]
Flash Erase Failed -> Failed at 0x02000000:0x00020000
Failed to Erase All Chips -> Flash Chip erase failed
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 76 products, Filtering DCT4 Products - wait...
2 Products left after filtering. Ready.
Retrieving Variants for Product RM-362 - wait...
270 Variants Retrieved
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__06.31.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V 
MSID-Crypted: 84F4961478FB3AA6447ACDB8AD
MSID-Plain: 2C40BAE900DA1982AA000000
FAID-Crypted: 48351D3A513C38F36467EB06
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01BFFFFF]
Erase taken 110.437s
Writing 191 blocks...
All blocks written OK! Time taken 71.765s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__06.31.image_ej_blu, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V 
MSID-Crypted: 84BE92C8F246487E1E229343D7
MSID-Plain: D26EBAF100DA1982AA000610
FAID-Crypted: D5A83195C895C0009760583D
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02180000-0x02E7FFFF]
Erasing NOR Region [0x02E80000-0x02FBFFFF]
Erase taken 130.954s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 368 blocks...
All blocks written OK! Time taken 37.422s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> Phone not detected
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm362__06.31.ppm_ej, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V 
MSID-Crypted: 849012D747E13C0E46A84FDB7F
MSID-Plain: 3E4EBAE900DA1982A8000000
FAID-Crypted: 0A75C4523D5A3D7F2902D005
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C00000-0x0217FFFF]
Erase taken 51.344s
Writing 63 blocks...
All blocks written OK! Time taken 23.765s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Post-flash tasks finished...
Flash successfully finished!

[nics]

Сообщение от osya

Erasing NOR Region [0x01000000-0x02FFFFFF]
Flash Erase Failed -> Failed at 0x02000000:0x00020000
Failed to Erase All Chips -> Flash Chip erase failed

это настораживает.
попробуйте стереть UFS и им же залить ТОЛЬКО MCU. Аппаратно исправный аппарат войдет в LOCAL MODE. Далее дольете контент и ленгпак, короткий PM и анлок. Циклон использовать не рекомендую - криво как-то он льет 2630\5000\2600с. Вообще, лучше всех справляется с ними UBD.