SE k750i Постоянный поиск сети - GSM Форум

FractalizeR · 09.12.2005, 17:44

Понятно. У кого-то из участников уже была такая проблема. Вроде бы решилась она калибровкой телефона в сервисном центре. Но мне кажется, что под "калибровкой" вполне мог подразумеваться и ремонт

**mservice** · 10.12.2005, 08:17

Here is the solution which the K750 after flash no network
(This Phone Come before is 'Hang' and after flash become Please Wait and flash again become no network)

what i did is

1. Select exact phone type - K750i, K750c or D750i.
2. Start the phone in recovery mode (via Force RSA recovery mode, CID=36).
3. Repair certificate and turn off the phone.
4. Reattach the phone in normal mode. It should be detected as brown CID36.
5. Unlock RSA incase the Repair EROM disable
6. Repair EROM.
7. Flash K750 full GDFS file.
8. Turn Off Phone
9. Reattach the phone.
10. Convert the phone to red CID36 using the special red CID36 EROM file: http://forum.gsmhosting.com/vbb/att...achmentid=26828
11. Turn off the phone and reattach it. It should be detected as red CID36 now.
12. Flash main firmware.
13. Unlock RSA and reattach.
14. Flash raw FS.
15. Upload singed archive (select the file example:K750i_CXC125953_APAC1_R1J002_Red36.ck75sfa
16. Reattach it again.
17. Customize FS by one of the built-in customizations.
18. Shutdown FS.
19. Reattach Again
20. In Tab "Security RSA" tick "Format Security zone" and "Recalculate CRCs" then "write to security zone"
21. If this show "ERROR: Could not initialize GDFS access"
22. Then In Tab "Locks" Convert to Brown and Use Direct Unlock
23. Put it sim card and wait for few seconds the Please Wait will run for short while and your phone is ready to use.

На каком то форуме взял, попробуй !

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
Siemens A35 постоянный поиск сети	SINUS	Siemens BenQ	9	17.04.2006 14:21
Нет сети в G5200	Letaniya	LG - аппаратный ремонт	4	22.12.2005 02:48
Решение: К750i после прошивки нет сети	leon	Cruiser	5	22.10.2005 21:21
Поиск сети B1300	dam	LG - программный ремонт	3	04.10.2005 12:50
C450 и лок сети	matrix	MSS4	3	11.07.2005 14:18

09.12.2005, 17:44	#1
FractalizeR Пользователь Регистрация: 26.12.2003 Сообщений: 7,712 Поблагодарил: 18 Поблагодарили 1,156 раз за 209 сообщений Репа: 79	Понятно. У кого-то из участников уже была такая проблема. Вроде бы решилась она калибровкой телефона в сервисном центре. Но мне кажется, что под "калибровкой" вполне мог подразумеваться и ремонт

10.12.2005, 08:17	#2
mservice Почетный пользователь Регистрация: 08.09.2004 Сообщений: 571 Поблагодарил: 82 Поблагодарили 229 раз за 86 сообщений Репа: 51	Here is the solution which the K750 after flash no network (This Phone Come before is 'Hang' and after flash become Please Wait and flash again become no network) what i did is 1. Select exact phone type - K750i, K750c or D750i. 2. Start the phone in recovery mode (via Force RSA recovery mode, CID=36). 3. Repair certificate and turn off the phone. 4. Reattach the phone in normal mode. It should be detected as brown CID36. 5. Unlock RSA incase the Repair EROM disable 6. Repair EROM. 7. Flash K750 full GDFS file. 8. Turn Off Phone 9. Reattach the phone. 10. Convert the phone to red CID36 using the special red CID36 EROM file: http://forum.gsmhosting.com/vbb/att...achmentid=26828 11. Turn off the phone and reattach it. It should be detected as red CID36 now. 12. Flash main firmware. 13. Unlock RSA and reattach. 14. Flash raw FS. 15. Upload singed archive (select the file example:K750i_CXC125953_APAC1_R1J002_Red36.ck75sfa 16. Reattach it again. 17. Customize FS by one of the built-in customizations. 18. Shutdown FS. 19. Reattach Again 20. In Tab "Security RSA" tick "Format Security zone" and "Recalculate CRCs" then "write to security zone" 21. If this show "ERROR: Could not initialize GDFS access" 22. Then In Tab "Locks" Convert to Brown and Use Direct Unlock 23. Put it sim card and wait for few seconds the Please Wait will run for short while and your phone is ready to use. На каком то форуме взял, попробуй !