V66: не могу разблокировать!

[ssam AleX]

Спасибо огромное - всё получилось!

Ещё раз убеждаюсь, что Ваша поддержка - Самая Лучшая!

Надеюсь мой случай будет всем примером!

Кстати некоторая информация по шнурам от VictorGSM:

::Regular mode::

In this mode your cable will work as a regular cable. You will be able to read the phone (if the phone is working and can be powered on), to flash the phone, and perform all the operations.
In this position you can connect powered off phone and power on the phone while it's connected to the cable (you CANNOT do this in REPAIR mode!). Also in this position you can read information from your phone, flex it, read/write eeprom and so on.

::Repair mode::

You should use this mode when you have "bricked" phone (dead phone, in case flashing has been interrupted, etc). Disconnect the battery from the phone. Wait 5 seconds. Connect the cable in the repair mode to the phone. Now you can flash it.

==============

Ещё раз СПАСИБО!!!