SE K310i странно не подключается к Cruiser. Почему? - GSM Форум

xag · 26.09.2007, 11:33

При подключении через DCU-60 кабель по методике из help-а

How to repair phones killed by deadly software combination
Description:
This procedure repairs majority of CID49/51 DB2020 phones killed by deadly combination - unsuccesful unlock by other tool (SETool, etc.) followed by unlocking by codes in Cruiser.

Prerequisities:
· Ensure the phone battery is fully charged.
· Ensure you have at least one server credit available.

Repair procedure:
· Attach the phone via DCU-60 or DCU-65 cable. Instead of holding the C key hold keys 2 & 5. Cruiser has to show "Booting via ROM..." Alternatively you may use a UC-10/Cruiser/Fighter cable.
· Reflash phone by any main firmware flash file of suitable CID and color.
· Reflash phone by any raw FS flash file of suitable CID and color.
· Customize the FS. One server credit will be deducted.
· Go to the Locks tab, press the Save security button and save the file to a folder of your choice.
· Press the Unterminate button and wait until the operation finishes.
· Now turn the phone off and disconect it from the cable.

Подключаю телефон, после запроса Cruisera, удерживая клавиши 2 и 5. Но каждый раз как только компьютер находит новое устройство Generic Flash Device(драйвера для него брал тут: c:\Program Files\Cruiser\USB Flash Device Drivers\v1.1.0.12\), он тут же сбрасывает это устройство.
После несколько таких попыток, один раз удалось сделать так, что Generic Flash Device не сбрасывается, но телефон все равно не подключается.

Получаю такой лог.
В котором один раз мелькнула строчка Unsupported flash certificate.
Это значит, что у телефона испорчен сертификат, а соответственно - труп?

System diagnostics passed.
Version 12.10 ready!
Do NOT connect the phone at this time!

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Time spent entering bootstrap: 10s
Unsupported flash certificate
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x8040
Protocol version: 3.1
Booting via EROM...
Trying Red CID52 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!

[ --- Detach Phone --- ]
Terminating threads...
Terminating threads...
All threads terminated.
All threads terminated.

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
Новые версии ПО от Cruiser Team	Brock	Cruiser	51	10.01.2015 09:18
k310i +cruiser помогите прошить	egik-	Cruiser	2	22.03.2007 12:36
Необходима прошивка для K310i red49 под Cruiser	ddabramov	Архив файлов для телефонов Sony Ericsson платформ DB2000/DB2010/DB2012/DB2020/PNX5230	3	12.11.2006 12:41

26.09.2007, 11:33	#1
xag Пользователь Регистрация: 09.11.2005 Сообщений: 110 Поблагодарил: 21 Поблагодарили 4 раз за 3 сообщений Репа: 0	При подключении через DCU-60 кабель по методике из help-а How to repair phones killed by deadly software combination Description: This procedure repairs majority of CID49/51 DB2020 phones killed by deadly combination - unsuccesful unlock by other tool (SETool, etc.) followed by unlocking by codes in Cruiser. Prerequisities: · Ensure the phone battery is fully charged. · Ensure you have at least one server credit available. Repair procedure: · Attach the phone via DCU-60 or DCU-65 cable. Instead of holding the C key hold keys 2 & 5. Cruiser has to show "Booting via ROM..." Alternatively you may use a UC-10/Cruiser/Fighter cable. · Reflash phone by any main firmware flash file of suitable CID and color. · Reflash phone by any raw FS flash file of suitable CID and color. · Customize the FS. One server credit will be deducted. · Go to the Locks tab, press the Save security button and save the file to a folder of your choice. · Press the Unterminate button and wait until the operation finishes. · Now turn the phone off and disconect it from the cable. Подключаю телефон, после запроса Cruisera, удерживая клавиши 2 и 5. Но каждый раз как только компьютер находит новое устройство Generic Flash Device(драйвера для него брал тут: c:\Program Files\Cruiser\USB Flash Device Drivers\v1.1.0.12\), он тут же сбрасывает это устройство. После несколько таких попыток, один раз удалось сделать так, что Generic Flash Device не сбрасывается, но телефон все равно не подключается. Получаю такой лог. В котором один раз мелькнула строчка Unsupported flash certificate. Это значит, что у телефона испорчен сертификат, а соответственно - труп? System diagnostics passed. Version 12.10 ready! Do NOT connect the phone at this time! [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Time spent entering bootstrap: 10s Unsupported flash certificate Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x8040 Protocol version: 3.1 Booting via EROM... Trying Red CID52 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Terminating threads... All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! [ --- Detach Phone --- ] Terminating threads... Terminating threads... All threads terminated. All threads terminated.