проблема !!! ARM7EJ-S core Hisense c177

[Elshad]

телефон подключается нормально

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.18, JTAG Manager Version: 1.25
Selected Custom Target: [ARM7EJ-S, 2.60V, TAP1]

Connecting to the ARM7EJ-S target...OK
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK

Target ID on TAP1: 0xF5FB3D8F - Connected OK

Read/Write DCC file

i такое проблема


Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.18, JTAG Manager Version: 1.25
Selected Custom Target: [ARM7EJ-S, 2.60V, TAP1]

Connecting to the ARM7EJ-S target...OK
Detected Target ID on TAP1: 0xF5FB3D8F
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR: Communication is not established. Terminating.

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR: Communication is not established. Terminating.

если мы выбираем
Hisense C117 Resurrection восстанавливается нормально
пожалуйста выложите DCC файл или обновить подершку