![]() |
проблема !!! ARM7EJ-S core Hisense c177
телефон подключается нормально
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.18, JTAG Manager Version: 1.25 Selected Custom Target: [ARM7EJ-S, 2.60V, TAP1] Connecting to the ARM7EJ-S target...OK Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Target ID on TAP1: 0xF5FB3D8F - Connected OK Read/Write DCC file i такое проблема Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.18, JTAG Manager Version: 1.25 Selected Custom Target: [ARM7EJ-S, 2.60V, TAP1] Connecting to the ARM7EJ-S target...OK Detected Target ID on TAP1: 0xF5FB3D8F Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...FAILED ERROR: Communication is not established. Terminating. Resurrection sequence started. Establish communication with the phone...FAILED ERROR: Communication is not established. Terminating. если мы выбираем Hisense C117 Resurrection восстанавливается нормально пожалуйста выложите DCC файл или обновить подершку |
Текущее время: 06:34. Часовой пояс GMT +3. |
Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd. Перевод: zCarot