Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2)

[gulka]

ПРОШИВКА micromax X502

Operation : Read Flash [ v1.55 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 31 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : B22371BC7F73E17A120D71015C565671
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000 
[0] : FLASH_LEN : 0x00300000
SDS_INFO : 0x002FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info   : KEYTAK61M_GB_11C_PCB01_gsm_MT6261_S00.T2014_VERSION.bin
FileVersion : T2014_VERSION

[ScatCFG] : MT6261 / T2014_VERSION / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK61M_GB_11C_PCB01_gsm_MT6261_S00\

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!

[fedja]

Elephone-S2-Plus-01MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V8_1_lwg_n_ eMMC

[gulka]

Vertex__Impress_X

[Dr_Wolodya]

Keneksi Q4 (MT6260) fullflash

Read fullflash

Operation : Read Flash [ v1.55 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 5 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E33F87C38AC5A6C6323867DD28DE113C
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00300000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info : 1303_Q4_UK_PCB01_gprs_MT6260_S00.V1_00_12_M150721. bin
FileVersion : V1_00_12_M150721
Saved to : C:\InfinityBox\CM2MTK\Read_out\1303_Q4_UK_PCB01_gp rs_MT6260_S00.V1_00_12_M150721.bin

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!

[denis78]

Supra ST-801
MT6577__chuangqi__ST-801__ST-801__4.1.2__ALPS.JB.MP.V1.16_Flash_tool

[gulka]

Билайн Смарт 5

[gulka]

SENSEIT E500 nv

[gulka]

Lenovo A536 NVdata

[fedja]

A7-30H MT6582_S00_A7-30HV_V34_1_wg_n_eMMC.rar

[slavkinj]

Read firmware CM2 V1.51

Operation : Read Flash [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50314A39344C125C0F53B412B1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , L49J1
[eMMC] : FLASH_CID : FE014E50314A39344C125C0F53B412B1
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9800000
[eMMC] : FLASH_UCP : 3736 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE3DA49B521EC471C9347727F39
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : Philips
ProdName : Philips_S309
ProdModel : Philips S309
Device : Philips
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : Philips_S309_1526_V05_CIS

[Read Ok] : preloader_ztenj72_we_72_m536_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / ztenj72_we_72_m536_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 792 MiB

[slavkinj]

Read firmware and NVRAM CM2 v1.51

Operation : Read Flash [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030303447453001A649C97FA249
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 11010030303447453001A649C97FA249
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE3B96852CEE701947F9F064654
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : BRAVIS NEO
ProdName : BRAVIS NEO
ProdModel : BRAVIS NEO
Device : BRAVIS NEO
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_BIRD6580.WEG.A.L

[Read Ok] : preloader_bird6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / bird6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1331 MiB

[deezee]

В ветке лежит уже, но архив битый, перезаливаю....

[fedja]

S-TELL M457_MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P2_1_wg _n_eMMC

[slavkinj]

Nomi i507 read Firmware CM2 v1.51

Operation : Read Flash [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473165050735B974FBB279
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A4838473165050735B974FBB279
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x134E2FE3F7E6B2A6B7493A9921705C16
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Nomi_i507
ProdName : Nomi i507
ProdModel : Nomi i507
Device : hct6580_weg_a_l
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : R06

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1382 MiB
Scatter saved to : E:\Backup\MT6580__Nomi_i507__Nomi_i507__hct6580_we g_a_l__5.1__R06\

All done!

[F_e_r_z]

BQ BQS-5020 Strike Firmware and NVRAM
__________________________________________________ ___________________________
MT6580__BQ__BQS-5020__BQS-5020__6.0__ALPS.W10.24.p0

LOG INFO

Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473165050757705AF533DD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A4838473165050757705AF533DD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x2B28293E3ADC927B52B9987AB09F5292
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : BQ
ProdName : BQS-5020
ProdModel : BQS-5020
Device : BQS-5020
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.W10.24.p0

SECURITY :
IMEI_SW [1] : 356840076336352
IMEI_SW [2] : 356840076536340
BTMAC Addr : C0C9762C6838
WiFi MAC : C0C9762C1A19

EXTRA :
LCD : Not info available
LCD Res : 1280x720
TOUCH [0] : EKTF2K_V3702
TOUCH [1] : FT6336
CAM [0] : STOM_HAL_IMGSENSOR
CAM [1] : =s5k4h8_mipi_raw
CAM [2] : hi842_mipi_raw
CAM [3] : ov5670_mipi_raw_sunwin
CAM [4] : ov5670_mipi_raw_cmk
CAM [5] : sp2508_mipi_raw
CAM [6] : gc2355_mipi_raw
MODEM : STOM_MODEM =v3702_hspa_modem_B1B8_bq_ru
LOCALE : ru_RU en_US zh_CN zh_TW es_ES pt_BR fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES xhdpi

[F_e_r_z]

iphone 6 pluse MT6589 Firmware and NVRAM
__________________________________________________ __________
MT6589__Apple__lPHONE_6_Plus__Apple__4.2.2__ALPS.J B3.MP.V1.38

LOG китайца

Brand : Apple
ProdName : iPhone
ProdModel : lPHONE 6 Plus
Device : Apple
AndroidVer: 4.2.2
MTKxCPU : MT6589
MTKxPRJ : ALPS.JB3.MP.V1.38

SECURITY :
BTMAC Addr : 000046657201
WiFi MAC : 001222234478

MODEM :
BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V15_1_2g_n

EXTRA :
LCD [0] : ili9807_qhd_dsi_vdo_5_5inch
LCD [1] : rm68191_qhd_dsi_vdo_5_5_qicai
LCD [2] : sh1286g_qhd_dsi_5_5
LCD Res : 854x480
TOUCH [0] : GSLX680
TOUCH [1] : GT9XX
TOUCH [2] : GT9XX_950
TOUCH [3] : ft6x06
CAM [0] : bf3905_mipi_yuv
CAM [1] : gc0310mipi_yuv
CAM [2] : gc2155mipi_yuv_7228
CAM [3] : s5k4ecgx_mipi_yuv
CAM [4] : sp0a20mipi_yuv
CAM [5] : ov5645_mipi_yuv_7228
CAM [6] : gc2155mipi_sub_yuv_7228
CAM [7] : gc2035_yuv_7228
MODEM : rtech72_wet_jb3_gprs_1_8_HS82582
LOCALE : en_GB es_ES zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH hdpi -sw600dp -sw720dp pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR bg_BG uk_UA hr_HR sl_SI ca_ES fa_IR da_DK pl_PL

[fedja]

Buffy b610 MT6572_eMMC.spnv

LOG

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8B00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030303447393010DA5007B8A0F1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393010DA5007B8A0F1
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0x74C4ECE2150D711CCAB4CAD890494A13
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

NVM Read Ok, MT6572_eMMC.spnv

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!

[deezee]

Info:

Operation : Check / Read Info [ v1.54 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303034473930106395E373717B
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 110100303034473930106395E373717B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x2C36287651A8826329E73B8C6A95C9A6
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : iPhone
ProdName  : iPhone
ProdModel : MG482ZP/A
Device    : cenon82_wet_jb5
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.JB5.MP.V1.26

MODEM : 
BaseBand  : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V22_1_wg_n

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

[ddilshod93]

Micromax Q385 NVM

Read NV

Operation : Read NV [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v4 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0x000296D8
Saved to : C:\InfinityBox\CM2SPD\Flash\Q385\NVM\CX_SPDNV.spdnv

Elapsed: 00:00:40

Reconnect Power/Cable!

Write NV

NVM File looks Ok
Operation : Write NV [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v4 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

Write NVM Part #1 Ok!
Write NVM Part #2 Ok!

Clean DYNV

Elapsed: 00:00:18

Reconnect Power/Cable!

[ddilshod93]

Micromax Q341 nvm.

Read NV

Operation : Read NV [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0x000293E8
Saved to : C:\InfinityBox\CM2SPD\Flash\Q341\NVM\CX_SPDNV.spdnv

Elapsed: 00:00:52

Reconnect Power/Cable!

Write NV

NVM File looks Ok
Operation : Write NV [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

Write NVM Part #1 Ok!
Write NVM Part #2 Ok!

Clean DYNV

Elapsed: 00:00:19

Reconnect Power/Cable!