Успешное применение, без комментариев [InfinityBox CM2 SPD]

[yurii-62]

SC7715_BQS_4008__ANDROID_NAND

Check/Read Info [ v1.13 ]

Check/Read Info [ v1.13 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 31 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : NAND Flash , Structure : Ok!

ExtraInfo : HWInfo not exists, normal phone
ExtraInfo : GSM Phone

Elapsed: 00:00:20

Read FullFlash [ v1.13 ]

Operation : Read FullFlash [ v1.13 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 31 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok , 0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc7715_modem_sc7715_cp2.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

Firmware Size : 292 MiB
Saved to : C:\Documents and Settings\Юрий\Мои документы\SC77xx_ANDROID_NAND_b256k\
Done!

Read NV [ v1.13 ]

Operation : Read NV [ v1.13 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 31 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected NAND Flash , Structure detect Ok!

Read NVM Part #1
Part Ok
Read NVM Part #2
Part Ok
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\CX_SPDNV.spdnv

Elapsed: 00:00:33

NV CX_SPDNV_SC77xx_BQS_4008_.spdnv

[gulka]

Micromax Q324 Прошивка MMX_Q324_RUS_SW_1.0.7_HW_4.0.0_20150323

Operation : Read FullFlash [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : Q324
Model Brand : Micromax
Model Device: Q324
AndrVersion : 4.4.3
BaseBand CPU: SP7731GEA
Project Ver : MMX_Q324_RUS_SW_1.0.7_HW_4.0.0_20150323
Model Ext   : Micromax Q324

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W14.50_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : hwinfo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 842 MiB
Saved to : I:\SPD infinity\SP7731GEA_Q324_4.4.3_MMX_Q324_RUS_SW_1.0.7_HW_4.0.0_20150323_Micromax_Q324_25.02.2016\
Done!

Elapsed: 00:04:05

Reconnect Power/Cable!

[Shishani]

Operation : Read NV [ v1.14 ]

Operation : Read NV [ v1.14 ]

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read NVM Part #1
Part Ok
Read NVM Part #2
Part Ok
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\Zte Blade A5_CX_SPDNV.spdnv

Operation : SP Unlock [ v1.14 ]

Operation : SP Unlock [ v1.14 ]
Mode : DirectUnlock

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

[romrip]

Read Info

Operation : Check/Read Info [ v1.15 ]

1. Remove battery. Insert battery back
2. Insert cable
3. In case of SVC init problems - connect with hold "VolDown" button!

 ====  Wait for phone...

Phone found! [ 188 ]
Port Opened
Sync...
InitSvc Done
Wait for phone...
Sync...
Phone Initial Info : 
Platform : MOCORTM_14B_W15.04_Debug
Project  : sc7731g_CP0_modem
HWInfo   : sc7731g_CP0_modem
Compile  : 01-20-2015 19:33:50
Phone Security Info : 
IMEI [1] : 352337070747*****
IMEI [2] : 352337070747*****
BT_ADDR  : 000000000000
SelfInfo : 
BatVoltage : 3.696 V

Done

Reconnect Power/Cable!

Read NVram, делал как для android 5.1 ,на самом деле стоит 4,2,2, разница есть в загрузчике в плане чтения NVRAM ?

Operation : Read NV [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 189 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read NVM Part #1
Part Ok
Read NVM Part #2
Part Ok
Saved to : F:\InfinityBox\CM2SPD\phdata\backup\CX_SPDNV_Fly_FS451.spdnv

Elapsed: 00:00:42

Reconnect Power/Cable!

Pattern Lock

Operation : Read PatternLock [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 189 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

FlashMode Set : Ok!
Reading PatternLock ... 
PatternLock Not Set!

Elapsed: 00:00:15

PhoneBook extract

Operation : Read PhoneBook [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 189 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

Mount : /data
Size  : 0x00000000A1CFB000

Step #1
Step #2

Read Ok, PhoneBook records extracted : 1029

TXT Saved to : F:\InfinityBox\CM2SPD\phdata\SPD_PhoneBook_FLY-FS451_.txt
Write : 1029
CSV Saved to : F:\InfinityBox\CM2SPD\phdata\SPD_PhoneBook_FLY-FS451_.csv
Write : 1029
VCF Saved to : F:\InfinityBox\CM2SPD\phdata\SPD_PhoneBook_FLY-FS451_.vcf
Write : 1029
VCFv3 Saved to : F:\InfinityBox\CM2SPD\phdata\SPD_PhoneBook_FLY-FS451__v3.vcf

Elapsed: 00:02:21

Reconnect Power/Cable!

Read Firmware(Pac)

Operation : Read FullFlash [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 225 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 225 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : FS451
Model Brand : Fly
Model Device: Nimbus1
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : SW08_Fly_FS451_20150612
Model Ext   : FS451

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 1018 MiB
Saved to : F:\InfinityBox\CM2SPD\phdata\SP7731GEA_Nimbus1_4.4.2_SW08_Fly_FS451_20150612_FS451\
Done!

Elapsed: 00:05:27

Reconnect Power/Cable!

Infinity SC Firmware Detected
FW Size : 1018 MiB
Load Ok!

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Fly
Device Model   : Nimbus1
Device CPU     : sp7731gea
Device IntName : FS451
Device Version : 4.4.2
Device Compile : 12.06.2015 9:59:54
Device Project : SW08_Fly_FS451_20150612
Device ExtInfo : FS451

[gulka]

Alcatel OneTouch 4024D PIXI FIRST Прошивка

Operation : Read FullFlash [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 23 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 23 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : ALCATEL_ONETOUCH_4024D
Model Brand : TCL
Model Device: ALCATEL_ONETOUCH_4024D
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_18045
Project Ver : 4024D_RU_AL_V1.8_150921
Model Ext   : 4024D

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 1242 MiB
Saved to : C:\Users\TIMUR\Desktop\SP7731GEA_18045_ALCATEL_ONETOUCH_4024D_4.4.2_4024D_RU_AL_V1.8_150921_4024D\
Done!

Elapsed: 00:07:27

Reconnect Power/Cable!

[gulka]

ZTE Blade A5 unlock megafon

Operation : SP Unlock [ v1.16 ]

Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ... 
SimLock state : Locked!
Unlocking ... 
Unlock Done!

Elapsed: 00:00:20

Reconnect Power/Cable!

Operation : Check/Read Info [ v1.16 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 

Model Name  : P731A20
Model Brand : ZTE
Model Device: P731A20
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
CompileDate : 25.09.2015 4:50:33
Project Ver : MGF_RU_QB18D_P731A20V1.0.0
Model Ext   : ZTE Blade A5

ExtraInfo : HWInfo not exists, normal phone
ExtraInfo : GSM Phone

Elapsed: 00:00:17

Reconnect Power/Cable!

[shoxa907]

Fly FS502 Google account

Info

Reading extended info ...

Model Name : FlyFS502
Model Brand : Fly
Model Device: Cirrus_1
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
CompileDate : 26.07.2015 16:10:05
Project Ver : SW08_FLY_FS502_2015_07_26
Model Ext : FS502

Operation : Read NV [ v1.16 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read NVM Part #1
Part Ok
Read NVM Part #2
Part Ok
Saved to : I:\*****\Fly\FS502\NV CM2\CX_SPDNV.spdnv

Operation : Format File System / Reset Settings [ v1.16 ]

Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x0000000160DF7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:16

[bostonbek]

ZTE BLADE A5 UNLOCK 15 Секунд

Start at : [15.03.2016 / 19:37:47]
Operation : SP Unlock [ v1.14 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

Elapsed: 00:00:15

[gulka]

Oysters Arctic 450 разблокировка от МТС

Model Name : Arctic450
Model Brand : Oysters
Model Device: Arctic450
AndrVersion : 4.4.2
BaseBand CPU: ARCTIC450
CompileDate : 06.11.2015 10:05:46
Project Ver : Oysters_Arctic450_SA004_06112015
Model Ext : Arctic450

[gulka]

C "невключайки" SAM. E1200R контакты прочитались

Operation : Read PhoneBook [ v1.18 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 46 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6530 , FDLStat : 00C0
[0] Flash DIE : 00C8 0060 0017 0000
[0] Flash VEN : GigaDevice , GD25LQ64
[0] Flash CAP : 00800000
Check data ... 
Reading UDA ... 
Process can take some time, please, wait
Records Found : 131
Saved to : C:\Users\TIMUR\Desktop\6530_PhoneBook.csv
Read Done!

Elapsed: 00:00:11

Reconnect Power/Cable!

[gulka]

Digma Optima 10.4 3G SC7731

Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 147 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : scx35_sp7731gea_k03_cfgj_64_4plus_dt
Model Brand : DIGMA
Model Device: scx35_sp7731gea_k03_cfgj_64_4
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_K03_CFGJ_64_4
Project Ver : KOT49H 14B_test-keys
Model Ext   : TT1004PG

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 639 MiB
Saved to : C:\Users\TIMUR\Desktop\SP7731GEA_K03_CFGJ_64_4_scx35_sp7731gea_k03_cfgj_64_4_4.4.2_KOT49H_14B_test-keys_TT1004PG\
Done!

Elapsed: 00:04:17

[gulka]

Clarion BQ7008G прошивка

Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 147 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf      
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 147 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf      
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : BQ7008G
Model Brand : BQ
Model Device: BQ7008G
AndrVersion : Android 4.4.2
BaseBand CPU: BQ7008G
Project Ver : BQ7008G-20160330-BSM0433G
Model Ext   : BQ7008G

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc8830_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_768x1024.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 843 MiB
Saved to : C:\Users\TIMUR\Desktop\BQ7008G_BQ7008G_Android_4.4.2_BQ7008G-20160330-BSM0433G_BQ7008G\
Done!

Elapsed: 00:07:56

Reconnect Power/Cable!

[gulka]

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SP7731GEA_18045_ALCATEL_ONETOUCH_4024D_4.4.2_4024D_RU_AL_V1.8_150921_4024D
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : fblogo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:02:34

Saved to : SP7731GEA_18045_ALCATEL_ONETOUCH_4024D_4.4.2_4024D_RU_AL_V1.8_150921_4024D.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : BQS-4503 DUBAI
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : fblogo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:02:56

Saved to : BQS-4503 DUBAI.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : BQS 5007 Rimini
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7715_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : CP2._CP2_WCN_14C_W15.18_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : fblogo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:23

Saved to : BQS 5007 Rimini.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SP5735C2EA_BQ_4.4.2_BQ7063G-20151007-BSM1025D
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc8830_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
[ADD FILE] : logo_1024x600.bin
[ADD FILE] : fblogo_768x1024.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:42

Saved to : SP5735C2EA_BQ_4.4.2_BQ7063G-20151007-BSM1025D.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : BQ-7005G MAUI
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.19_Release.bin
[ADD FILE] : logo_1024x600.bin
[ADD FILE] : fblogo_1024x600.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:02:23

Saved to : BQ-7005G MAUI.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : BQ_Shanghai
Step  #1 : Identify

MEMORY : NAND
LAYOUT : 256 KiB

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv_b256k_p4k.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7715_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7715_modem_sc7715_cp2.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system_b256k_p4k.img
[ADD FILE] : cache_b256k_p4k.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata_b256k_p4k.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0015
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:00:47

Saved to : BQ_Shanghai.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : Y560-U02_HWY560-U_4.4.2_Y560-U02V100R001C328B105_HUAWEI_Y560-U02
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W14.41_P1_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : fblogo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:03:16

Saved to : Y560-U02_HWY560-U_4.4.2_Y560-U02V100R001C328B105_HUAWEI_Y560-U02.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SP7731GEA_K03_CFGJ_64_4_scx35_sp7731gea_k03_cfgj_64_4_4.4.2_KOT49H_14B_test-keys_TT1004PG
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
[ADD FILE] : logo_1024x600.bin
[ADD FILE] : fblogo_1024x600.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:53

Saved to : SP7731GEA_K03_CFGJ_64_4_scx35_sp7731gea_k03_cfgj_64_4_4.4.2_KOT49H_14B_test-keys_TT1004PG.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : Micromax Q335
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : fblogo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:02:37

Saved to : Micromax Q335.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SP7731GEA_Q324_4.4.3_MMX_Q324_RUS_SW_1.0.7_HW_4.0.0_20150323_Micromax_Q324
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7731g_modem_CP2_WCN_14E_W14.50_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : hwinfo.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:03:35

Saved to : SP7731GEA_Q324_4.4.3_MMX_Q324_RUS_SW_1.0.7_HW_4.0.0_20150323_Micromax_Q324.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SCX15_SP7715EA_P172R12_4.4.2_MGF_RU_QB18D_P172R12V1.0.2
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7715

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7715_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : CP2._CP2_WCN_14C_W14.51_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : fblogo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:02:56

Saved to : SCX15_SP7715EA_P172R12_4.4.2_MGF_RU_QB18D_P172R12V1.0.2.pac
Done!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SP5735C2EA_tm7866rev1_4.4.2_V1.1.KITKAT.rus.teXet.20150619.094104
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc8830_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830_modem_CP2_WCN_14C_W14.51_Release.bin
[ADD FILE] : logo_1024x600.bin
[ADD FILE] : fblogo_768x1024.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:03:19

Saved to : SP5735C2EA_tm7866rev1_4.4.2_V1.1.KITKAT.rus.teXet.20150619.094104.pac
Done!

[gulka]

Планшет BQ 7063G DISCO Прошивка

Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : BQ7063G
Model Brand : BQ
Model Device: BQ7063G
AndrVersion : 4.4.2
BaseBand CPU: BQ7063G
Project Ver : BQ7063G-20160512-BSM0435D
Model Ext   : BQ7063G

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.19_Release.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 939 MiB
Saved to : C:\Users\TIMUR\Desktop\BQ7063G_BQ7063G_4.4.2_BQ7063G-20160512-BSM0435D_BQ7063G\
Done!

Elapsed: 00:06:21

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : BQ7063G_BQ7063G_4.4.2_BQ7063G-20160512-BSM0435D_BQ7063G
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.19_Release.bin
[ADD FILE] : logo_1024x600.bin
[ADD FILE] : fblogo_1024x600.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:03:14

Saved to : BQ7063G_BQ7063G_4.4.2_BQ7063G-20160512-BSM0435D_BQ7063G.pac
Done!

[gulka]

ПЛАНШЕТ BQ-1008G GRACE Прошивка PAC

Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : BQ1008G
Model Brand : BQ
Model Device: BQ1008G
AndrVersion : 4.4.2
BaseBand CPU: BQ1008G
Project Ver : BQ1008G-20160421-BSM0435G
Model Ext   : BQ1008G

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.19_Release.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 739 MiB
Saved to : C:\Users\TIMUR\Desktop\BQ1008G_BQ1008G_4.4.2_BQ1008G-20160421-BSM0435G_BQ1008G\
Done!

Elapsed: 00:04:53

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : BQ1008G_BQ1008G_4.4.2_BQ1008G-20160421-BSM0435G_BQ1008G
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.19_Release.bin
[ADD FILE] : logo_1024x600.bin
[ADD FILE] : fblogo_1024x600.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:20

Saved to : BQ1008G_BQ1008G_4.4.2_BQ1008G-20160421-BSM0435G_BQ1008G.pac
Done!

[gulka]

BQS-5501 Kawasaki прошивка PAC

Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : scx35_sp7731gea_lm_fs031_project
Model Brand : BQS
Model Device: scx35_sp7731gea_lm_fs031
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_LM_FS031
Project Ver : FS031M03_K10_WD_OBOI_G4W18_QHD_V05_64X8_BT_FM_WIFI_GPS_ACC_PLS_2SIM_20151023_1553
Model Ext   : BQS-5501

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 1009 MiB
Saved to : C:\Users\TIMUR\Desktop\SP7731GEA_LM_FS031_scx35_sp7731gea_lm_fs031_4.4.2_FS031M03_K10_WD_OBOI_G4W18_QHD_V05_64X8_BT_FM_WIFI_GPS_ACC_PLS_2SIM_20151023_1553_BQS-5501\
Done!

Elapsed: 00:06:11

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SP7731GEA_LM_FS031_scx35_sp7731gea_lm_fs031_4.4.2_FS031M03_K10_WD_OBOI_G4W18_QHD_V05_64X8_BT_FM_WIFI_GPS_ACC_PLS_2SIM_20151023_1553_BQS-5501
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
[ADD FILE] : logo_540x960.bin
[ADD FILE] : fblogo_540x960.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:53

Saved to : SP7731GEA_LM_FS031_scx35_sp7731gea_lm_fs031_4.4.2_FS031M03_K10_WD_OBOI_G4W18_QHD_V05_64X8_BT_FM_WIFI_GPS_ACC_PLS_2SIM_20151023_1553_BQS-5501.pac
Done!

[MygsmWorld]

Spice Xplor-525Q SC7731G Android Version 5.1 Firmware Read & Converted To Pac.


Operation : Check/Read Info [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 

Model Name  : sp7731geahdplusoversea
Model Brand : Spice
Model Device: Xplor-525Q
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HD
CompileDate : 1/15/2016 12:11:45 PM
Project Ver : Spice_Xplor-525Q_IND_Ver11.0_160115_1200
Model Ext   : Xplor-525Q

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:19

Reconnect Power/Cable!

Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : sp7731geahdplusoversea
Model Brand : Spice
Model Device: Xplor-525Q
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HD
Project Ver : Spice_Xplor-525Q_IND_Ver11.1_160129_1200
Model Ext   : Xplor-525Q

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1517 MiB
Saved to : C:\InfinityBox\CM2SPD\Flash\SP7731GEA_HD_Xplor-525Q_5.1_Spice_Xplor-525Q_IND_Ver11.1_160129_1200_Xplor-525Q\
Done!

Elapsed: 00:13:17

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SP7731GEA_HD_Xplor-525Q_5.1_Spice_Xplor-525Q_IND_Ver11.1_160129_1200_Xplor-525Q
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[ADD FILE] : logo_540x960.bin
[ADD FILE] : fblogo_540x960.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:37

Saved to : SP7731GEA_HD_Xplor-525Q_5.1_Spice_Xplor-525Q_IND_Ver11.1_160129_1200_Xplor-525Q.pac
Done!

Boot : Volume Up Key. & Cellphone Rooted By iRoot.

[gulka]

BQ 5009 SYDNEY Прошивка PAC file

Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : skytek_wg5089
Model Brand : BQ
Model Device: skytek_wg5089
AndrVersion : 5.1
BaseBand CPU: SKYTEK_WG5089
Project Ver : BQS5009-2015.12.11-HSS0721T
Model Ext   : BQS-5009

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 1046 MiB
Saved to : C:\Users\TIMUR\Desktop\SKYTEK_WG5089_skytek_wg5089_5.1_BQS5009-2015.12.11-HSS0721T_BQS-5009\
Done!

Elapsed: 00:05:36

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SKYTEK_WG5089_skytek_wg5089_5.1_BQS5009-2015.12.11-HSS0721T_BQS-5009
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[ADD FILE] : logo_720x1280.bin
[ADD FILE] : fblogo_720x1280.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:56

Saved to : SKYTEK_WG5089_skytek_wg5089_5.1_BQS5009-2015.12.11-HSS0721T_BQS-5009.pac
Done!

[yurii-62]

ZTE BLADE A5 PRO Megafon, SP Unlock [ v1.22 ]

Reading extended info ...

Model Name : P731A20_RU_MEGAFON
Model Brand : ZTE
Model Device: P731A20
AndrVersion : 5.0.1
BaseBand CPU: SP7731GEA_HD
CompileDate : 24.12.2015 11:40:05
Project Ver : MGF_RU_QB18DL_P731A20V1.0.1
Model Ext : ZTE BLADE A5 PRO

Operation : SP Unlock [ v1.22 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 17 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

Elapsed: 00:00:26

[uploads]

Prestigio PSP3458DUO google acaunt

Operation : Format File System / Reset Settings [ v1.22 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 433 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000000843F7000
State : 0x0001

Mount : /cache
Size : 0x0000000015E00000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:23

Reconnect Power/Cable!

------------------------------------------------
Добавлено позже:
Model Name : PSP3458DUO

Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 433 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 433 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 433 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : PSP3458DUO
Model Brand : Prestigio
Model Device: TE45B3G
AndrVersion : 5.1
BaseBand CPU: SC7731G
Project Ver : PSP3458DUO.20160518.1.0.03
Model Ext : PSP3458DUO

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 1291 MiB
Saved to : C:\Users\User\Desktop\Prestigio PSP3458DUO\SC7731G_TE45B3G_5.1_PSP3458DUO.20160518 .1.0.03_PSP3458DUO\
Done!

Elapsed: 00:08:07

Reconnect Power/Cable!