Ошибки и обсуждение [CM2QLM Qualcomm]

[Mumang]

Xplay6 ошибка лог прилагаю.

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : 9DDA3E6D
ID_BLOCK_I : 009470E1
ID_BLOCK_L : 6CCE3C639D847BA0D379A4F5693910CC
ID_BLOCK_L : 853EC493AB9A1BB83984C8055CC308BA
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00001000
UFS Device : SAMSUNG KLUDG8J1CB-B0B1 0800
UFS SectSize : 0x1000
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x1
Boot Ok!


Brand : vivo
Device : msm8996
AndroidVer: 6.0.1
Manufact. : vivo
QLMxCPU : MSM8996

DevInfo : MSM8996__vivo__vivo__ANDR_v6.0.1__msm8996

ReportFile : F:\CM2QLM\1.15\CM2QLM\QLM_5report.log
Send report to mail : with title "QFW" !

Info : Device is not supported yet!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[yurii-62]

Xiaomi Redmi 3S

Проша слита с рабочего ТА,

Read Flash

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.15


Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : A9876B0A
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : 044DDEFC404789ECE5FF493C9002FADD
ID_BLOCK_L : 51AFC57CB39A8C621DEC25205FCF1B4E
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x11 , VENDOR : TOSHIBA , NAME : 016G70
Boot Ok!


Brand     : Xiaomi
ProdName  : land
ProdModel : Redmi 3S
Device    : land
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU   : MSM8937

DevInfo : MSM8937__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_3S__land__land

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : lksecapp.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8937 / eMMC
Firmware Size : 3750 MiB

Done!
Elapsed: 00:05:43

!

Запись слитой проши в ТА. имеем ошибку (

ProgStart : start 1054720, num 6291456
Flash Error , No ACK message! Check Battery charge , Cable

Error : Flashing failed!
Check previous message for more info!

)

Operation : Flash [ v1.15 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 00F23546
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : D88102208C9B4D10A13B85C054C63619
ID_BLOCK_L : BA3A3097267111C9B611B2B5C234E0A5
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG2e
Boot Ok!

Flash Chain : 51
Flashing now

Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : adspso.bin
Flashing : sec.dat
Flashing : splash.img
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : boot.img
Flashing : recovery.img
Flashing : system.img
ProgStart  : start 1054720, num 6291456
Flash Error , No ACK message! Check Battery charge , Cable

Error : Flashing failed!
Check previous message for more info!

Reconnect Power/Cable!

Запись заводской все ОК..

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.15


Loading firmware ... 
Loading 1 program definition file(s) ... 
Load Ok!

Operation : Flash [ v1.15 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 00F23546
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : D88102208C9B4D10A13B85C054C63619
ID_BLOCK_L : BA3A3097267111C9B611B2B5C234E0A5
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG2e
Boot Ok!

Flash Chain : 52
Flashing now

Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : adspso.bin
Flashing : splash.img
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : boot.img
Flashing : recovery.img
Flashing : system.img
Flashing : cache.img
Flashing : persist.img
Flashing : dummy.bin
Flashing : mdtp.img
Flashing : lksecapp.mbn
Flashing : lksecapp.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : cust.img
Flashing : userdata.img
Flashing : gpt_main0.bin
Flashing : gpt_backup0.bin

Flash sequence completed!

Applying patches for storage # 0
Records : 26
Patch sequence completed!

BootConfig set to 0x00

Flashing done!

Done!
Elapsed: 00:04:55

Reconnect Power/Cable!

[nodir0077]

ZTE Blade V0850(zte blade v8 mini)

Operation : Identify [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 435 [MSM8940]
ID_BLOCK_S : F336EE5C
ID_BLOCK_I : 0006B0E1
ID_BLOCK_E : 00040000
ID_BLOCK_L : 32CE3BF8F9F023D555C922D08DD5B905
ID_BLOCK_L : 9C3B1E775EEBB9EA0804185F898B89E6
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[motokmips]

Operation : Identify [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 5A06EA8E
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : 57D4661AA7A9D41606A2EE674F73C7CB
ID_BLOCK_L : D0390F0553CF99D3D35F9294D32C6A3A
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[chekm]

Сообщение от motokmips

Operation : Identify [ v1.15 ]


Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Через fastboot его шейте родной прошивкой

[motokmips]

Сообщение от chekm

Через fastboot его шейте родной прошивкой

Телефон рабочий, был интересен момент поддержки в программе.

[chekm]

Сообщение от motokmips

Телефон рабочий, был интересен момент поддержки в программе.

а загрузчик если разлочить? потом тоже самое?
...... думаю ничего не изменится

[JayDi]

Со следующей будет. В привате протестили еще с неделю-полторы назад.

[Drim]

Обновление предвидится ?

[nodir0077]

Vivo Y66 - PD1621 [Read Flash]

Operation : Read Flash [ v1.15 ]

Brand : vivo
ProdName : PD1621
ProdModel : vivo
Device : msm8937_32
AndroidVer: 6.0.1
Manufact. : vivo
QLMxCPU : MSM8937

DevInfo : MSM8937__vivo__vivo__ANDR_v6.0.1__msm8937_32__PD16 21

ReportFile : C:\InfinityBox\CM2QLM\QLM_5report.log
Send report to mail : with title "QFW" !

Info : Device is not supported yet!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[gulka]

Prestigio MultiPad Ranger 7.0 3G

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 08BC7FEE
ID_BLOCK_I : 008140E1
ID_BLOCK_L : FB0D679F3EA4D1DC8BE0107DBA811139
ID_BLOCK_L : 97EE50FBFC67D75C71BC11CEC42BC506
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!


Brand     : Prestigio
ProdName  : PMT3277_3G
ProdModel : PMT3277_3G
Device    : PMT3277_3G
AndroidVer: 4.3
Manufact. : Compal
QLMxCPU   : MSM8610

DevInfo : MSM8610__Compal__Prestigio__ANDR_v4.3__PMT3277_3G__PMT3277_3G__PMT3277_3G

ReportFile : C:\InfinityBox\CM2QLM\QLM_5report.log
Send report to mail : rd@infinity-box.com with title "QFW" !

Info  : Device is not supported yet!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[yurii-62]

ZTE AXON 7 mini (В2017G)
Попытка сброса FRP - считать инфу..

Operation : Reset Settings [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 01221F0E
ID_BLOCK_I : 009720E1
ID_BLOCK_E : 00000004
ID_BLOCK_L : EF47CEFED214CB8C92A2A8DAF89C016B
ID_BLOCK_L : A95B825AF7F233D2DBF2235B1C0FE336
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[JayDi]

Есть такой. Пусть полежит денёк. Завтра залью в тред файлы.

[yurii-62]

Сообщение от JayDi

Есть такой. Пусть полежит денёк. Завтра залью в тред файлы.

Ожидать или нет? клиет терзает...

[JayDi]

Сообщение от yurii-62

Ожидать или нет? клиет терзает...

В теории должен работать.

[yurii-62]

Сообщение от JayDi

В теории должен работать.

Все Ок. Спасибо...

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 01221F0E
ID_BLOCK_I : 009720E1
ID_BLOCK_E : 00000004
ID_BLOCK_L : EF47CEFED214CB8C92A2A8DAF89C016B
ID_BLOCK_L : A95B825AF7F233D2DBF2235B1C0FE336
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8952 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!

Read FW

Operation : Reset Settings [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 01221F0E
ID_BLOCK_I : 009720E1
ID_BLOCK_E : 00000004
ID_BLOCK_L : EF47CEFED214CB8C92A2A8DAF89C016B
ID_BLOCK_L : A95B825AF7F233D2DBF2235B1C0FE336
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8952 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 01221F0E
ID_BLOCK_I : 009720E1
ID_BLOCK_E : 00000004
ID_BLOCK_L : EF47CEFED214CB8C92A2A8DAF89C016B
ID_BLOCK_L : A95B825AF7F233D2DBF2235B1C0FE336
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8952 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand     : ZTE
ProdName  : P852A11
ProdModel : ZTE B2017G
Device    : msm8952_64
AndroidVer: 6.0.1
Manufact. : ZTE
QLMxCPU   : MSM8952

DevInfo : MSM8952__ZTE__ZTE__ANDR_v6.0.1__ZTE_B2017G__msm8952_64__P852A11

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : cmnlib.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8952 / eMMC
Firmware Size : 3504 MiB

Done!
Elapsed: 00:09:28

Reconnect Power/Cable!

[motokmips]

Operation : Identify [ v1.15 ]

[CODE]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : 7C06CAE4
ID_BLOCK_I : 009470E1
ID_BLOCK_E : 00040000
ID_BLOCK_L : FC8AB13EB79DE37B9F881C81F8DCDD1F
ID_BLOCK_L : F97AC06197969DC16C863D9E64DD3BBD
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00000200
Boot Ok!


Brand     : ZTE
ProdName  : P996A03_N
ProdModel : ZTE A2017
Device    : ailsa_ii
AndroidVer: 7.1.1
Manufact. : ZTE
SysPatch  : NMF26V
DevComTime: 17.07.2017 4:31:03
QLMxCPU   : MSM8996

USERData : ENCRYPTED
GCSec    : NORMAL

Done!
Elapsed: 00:00:46

Reconnect Power/Cable!

Operation : Read Flash [ v1.15 ]

[CODE]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : 7C06CAE4
ID_BLOCK_I : 009470E1
ID_BLOCK_E : 00040000
ID_BLOCK_L : FC8AB13EB79DE37B9F881C81F8DCDD1F
ID_BLOCK_L : F97AC06197969DC16C863D9E64DD3BBD
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00000200
Boot Ok!


Brand     : ZTE
ProdName  : P996A03_N
ProdModel : ZTE A2017
Device    : ailsa_ii
AndroidVer: 7.1.1
Manufact. : ZTE
QLMxCPU   : MSM8996

DevInfo : MSM8996__ZTE__ZTE__ANDR_v7.1.1__ZTE_A2017__ailsa_ii__P996A03_N

ReportFile : C:\InfinityBox\CM2QLM\QLM_5report.log
Send report to mail :  with title "QFW" !

Info  : Device is not supported yet!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Operation : EDL Security Operation [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : 7C06CAE4
ID_BLOCK_I : 009470E1
ID_BLOCK_E : 00040000
ID_BLOCK_L : FC8AB13EB79DE37B9F881C81F8DCDD1F
ID_BLOCK_L : F97AC06197969DC16C863D9E64DD3BBD
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00000200
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : C:\InfinityBox\CM2QLM\Backup\MSM8996_[009470E1]_7C06CAE4_SEC\

Done!
Elapsed: 00:00:29

Reconnect Power/Cable!

Operation : Memory Tool Init [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : 7C06CAE4
ID_BLOCK_I : 009470E1
ID_BLOCK_E : 00040000
ID_BLOCK_L : FC8AB13EB79DE37B9F881C81F8DCDD1F
ID_BLOCK_L : F97AC06197969DC16C863D9E64DD3BBD
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0001C000/0001C000/00001000/00001000/00000200
Boot Ok!

Set default path : C:\InfinityBox\CM2QLM\phdata\

Ready!

Operation : Read Memory  [ v1.15 ]

Reading selected partitions [10]
[0] Read partition : GPT
Saved to : C:\InfinityBox\CM2QLM\phdata\GPT.bin
[1] Read partition : SSD
Saved to : C:\InfinityBox\CM2QLM\phdata\SSD.bin
[2] Read partition : CACHE
Saved to : C:\InfinityBox\CM2QLM\phdata\CACHE.bin
[3] Read partition : MISC
Saved to : C:\InfinityBox\CM2QLM\phdata\MISC.bin
[4] Read partition : KEYSTORE
Saved to : C:\InfinityBox\CM2QLM\phdata\KEYSTORE.bin
[5] Read partition : DEVCFG
Saved to : C:\InfinityBox\CM2QLM\phdata\DEVCFG.bin
[6] Read partition : FBOP
Saved to : C:\InfinityBox\CM2QLM\phdata\FBOP.bin
[7] Read partition : FRP
Saved to : C:\InfinityBox\CM2QLM\phdata\FRP.bin
[8] Read partition : CRYPTKEY
Saved to : C:\InfinityBox\CM2QLM\phdata\CRYPTKEY.bin
[9] Read partition : GPTBAK
Saved to : C:\InfinityBox\CM2QLM\phdata\GPTBAK.bin

Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:01:37

Reconnect Power/Cable!

[motokmips]

Сегодня перестал работать модуль InfinityBox CM2QLM!
Нет даже в процессах!
1. Переустанавливал
2. Запускал из старой копии папки
Остальные модули работают, карта активна до ноября 2018

Скачал заново, установил, заработал, что нужно было....

[yurii-62]

XiaoMi 4c MIAccount reset

Brand : Xiaomi
ProdName : libra
ProdModel : Mi-4c
Device : libra
AndroidVer: 7.0
Manufact. : Xiaomi
SysPatch : NRD90M
DevComTime: 29.06.2017 6:32:24
QLMxCPU : MSM8992

USERData : NORMAL
GCSec : NORMAL

Operation : Reset Settings [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 808 [MSM8992]
ID_BLOCK_S : 016149C6
ID_BLOCK_I : 009690E1
ID_BLOCK_L : 580182A00C1BCD9021BB0540D446B699
ID_BLOCK_L : 2BD5AF06C9E0E2382786434631A57134
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8992 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ] 
ExtInfo : 0x0001C000/00100000/00000400/00001000/00000200
Boot Ok!


MIAccount reset passed!

Complete reset : 
> If device lock after WiFi - use RESET MI APP 
> PowerOn device, NOT power WiFi, SIM and etc. Make device setup
> Reset MI APP. Device will not have MIServices anymore


Done!
Elapsed: 00:00:27

MRT на этом Та (благополучно сдулся), не справился, думаю дайка попробую CM2QLM как видите в логе все ОК, тело запустилось, приложил фото, Мi аккаунта нет, подключил к интернету тело не лочится есть возможность создать аккаунт...
ЗЫ. Так что я в ступоре, это какое то истечение обстоятельств мне повезло, или CM2QLM все таки может делать чудеса..

[Mumang]

Не надо сравнивать у всех программаторов разный подход к разлоку, не считая копипасты всякой.