Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2)

[TIGRa_MHC]

Xiaomi Redmi Note 2
preloader_lcsh6795_lwt_l

Operation.log

Card found : S/N : iTigra , v0134
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6795
BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x92
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303332473734006BCF493662E1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 47G23
[eMMC] : FLASH_CID : 110100303332473734006BCF493662E1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xB92E1B69B3F9FAD5A00F337451F7D5D4
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Xiaomi
ProdName : hermes
ProdModel : Redmi Note 2
Device : hermes
AndroidVer: 5.0.2
MTKxCPU : MT6795
MTKxPRJ : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

SECURITY :
IMEI_SW [1] : 868192023570951
IMEI_SW [2] : 868192023570951
BTMAC Addr : FC64BAC4D99B
WiFi MAC : FC64BAC4D99C

MODEM :
BaseBand : MT6795_S00_MOLY_LR9_W1423_MD_LWTG_MP_V24_P27_1_ltg _n

EXTRA :
LCD [0] : nt35596_fhd_dsi_vdo_tianma
LCD [1] : nt35596_fhd_dsi_vdo_auo
LCD [2] : nt35532_fhd_dsi_vdo_boe
LCD Res : 1920x1080
TOUCH [0] : ft5346
TOUCH [1] : atmel336t
CAM [0] : s5k3m2_mipi_raw
CAM [1] : s5k3m2_2nd_mipi_raw
CAM [2] : ov5670_mipi_raw
CAM [3] : ov5670_2nd_mipi_raw
CAM [4] : ov5670_flt_2nd_mipi_raw
MODEM : STOM_MODEM =lcsh6795_lwt_l_lttg_open_market_5m lcsh6795_lwt_l_lwg_open_market_5m
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:22
Reconnect Power/Cable!


Operation : Read NVRAM [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6795
BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x92
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303332473734006BCF493662E1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 47G23
[eMMC] : FLASH_CID : 110100303332473734006BCF493662E1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xB92E1B69B3F9FAD5A00F337451F7D5D4
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6795_S00_MOLY_LR9_W1423_MD_LWTG_MP_V24_P27_1_ltg _n

NVM Read Ok, MT6795_S00_MOLY_LR9_W1423_MD_LWTG_MP_V24_P27_1_ltg _n_eMMC_868192023570951.spnv

Done!
Elapsed: 00:00:42
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6795
BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...

[DA_ERROR] : 0BC40005
Boot Error!

Operation Failed
Elapsed: 00:00:15
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6795
BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x92
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303332473734006BCF493662E1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 47G23
[eMMC] : FLASH_CID : 110100303332473734006BCF493662E1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xB92E1B69B3F9FAD5A00F337451F7D5D4
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Xiaomi
ProdName : hermes
ProdModel : Redmi Note 2
Device : hermes
AndroidVer: 5.0.2
MTKxCPU : MT6795
MTKxPRJ : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

[Read Ok] : preloader_lcsh6795_lwt_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6795 / V1.1.2 / lcsh6795_lwt_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1962 MiB
Scatter saved to : C:\Program Files (x86)\InfinityBox\CM2MTK\Backup\NV\MT6795__Xiaomi_ _Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LC SH6795.LWT.L_P129\

All done!

Done!
Elapsed: 00:08:07
Reconnect Power/Cable!

MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS. L0.MP6.V3.18_LCSH6795.LWT.L_P129
MT6795_S00_MOLY_LR9_W1423_MD_LWTG_MP_V24_P27_1_ltg _n_eMMC_868192023570951.spnv

[TIGRa_MHC]

XGODY X700
preloader_a400

Operation.log

Card found : S/N : iTigra , v0130
Chinese Miracle II [MTK module] v 1.49

Start at : [18.06.2016 / 12:58:08]
Operation : Check / Read Info [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 59 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 700100533130303034089A5ADD9B4253
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 40001
[eMMC] : FLASH_CID : 700100533130303034089A5ADD9B4253
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E4000000
[eMMC] : FLASH_UCP : 3648 MiB [eMMC 4 GiB]
DEV RID : 0x449EFE86FDD1E68515861C53CF59CA0D
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : XGODY
ProdName : XGODY
ProdModel : X700
Device : XGODY
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.BAND15.V20

EXTRA :
LCD [0] : ili9806e
LCD Res : 854x480
TOUCH [0] : ft6x06
TOUCH [1] : msg2133
CAM [0] : gc2035_yuv
CAM [1] : ov5645_mipi_yuv
CAM [2] : gc0329_yuv
CAM [3] : #gc2035_yuv
CAM [4] : gc0329_yuv#sp2529_yuv
CAM [5] : gc0329_yuv#hxf
CAM [6] : modify
CAM [7] : 20140224
CAM [8] : s5k4ecgx_mipi_yuv
CAM [9] : s5k8aayx_yuv
MODEM : band15PA6684
LOCALE : en_US fa_IR es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB

Done!
Elapsed: 00:00:18
Reconnect Power/Cable!

Finish at : [18.06.2016 / 12:58:26]

Start at : [18.06.2016 / 12:58:48]
Operation : Read Flash [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 59 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 700100533130303034089A5ADD9B4253
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 40001
[eMMC] : FLASH_CID : 700100533130303034089A5ADD9B4253
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E4000000
[eMMC] : FLASH_UCP : 3648 MiB [eMMC 4 GiB]
DEV RID : 0x449EFE86FDD1E68515861C53CF59CA0D
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : XGODY
ProdName : XGODY
ProdModel : X700
Device : XGODY
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.BAND15.V20

[Read Ok] : preloader_a400.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / a400 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 680 MiB
Scatter saved to : C:\Program Files (x86)\InfinityBox\CM2MTK\Backup\NV\MT6572__XGODY__ X700__XGODY__4.4.2__ALPS.KK1.MP7.BAND15.V20\

All done!

Done!
Elapsed: 00:03:16
Reconnect Power/Cable!

MT6572__XGODY__X700__XGODY__4.4.2__ALPS.KK1.MP7.BA ND15.V20

[deezee]

Texet TM-4772 (iX) NVRAM

Log

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 139 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D43303447580C618627319D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D43303447580C618627319D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID : 0x2C362876901761C1AEFC21EBB6714768
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : teXet
ProdName : teXet
ProdModel : iX
Device : iX
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.8

SECURITY :
IMEI_SW [1] : 863052014287715
IMEI_SW [2] : 863052014287723
BTMAC Addr : 305201428771
WiFi MAC : 000CE7428771

MODEM :
BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V4_P4_1_wg_n

EXTRA :
LCD [0] : otm9608_wvga_dsi_cmd
LCD Res : 960x540
TOUCH [0] : msg2133
CAM [0] : ov5645_mipi_yuv
CAM [1] : hi253_yuv
MODEM : v926f_md1_w1258_sim_russialock_hspa
LOCALE : en_US ca_ES cs_CZ de_DE es_ES fr_FR it_IT hr_HR lv_LV ru_RU hu_HU pl_PL sl_SI bg_BG uk_UA fi_FI lt_LT hdpi

Done!

[TIGRa_MHC]

Vodafone VF-895N

Operation.log

Operation : Identify [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0FF46A9E
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 85B4E522F20962203B00004792886F95
ID_BLOCK_L : 38C521EF0D54BBB7FEE73C90A8ED81B1
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D3000000 [ eMMC 8 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand : Vodafone
ProdName : VF-895N
ProdModel : VF-895N
Device : VF-895N
AndroidVer: 5.0.2
Manufact. : Vodafone
QLMxCPU : MSM8916

Done!
Elapsed: 00:00:10

Reconnect Power/Cable!




Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0FF46A9E
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 85B4E522F20962203B00004792886F95
ID_BLOCK_L : 38C521EF0D54BBB7FEE73C90A8ED81B1
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D3000000 [ eMMC 8 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand : Vodafone
ProdName : VF-895N
ProdModel : VF-895N
Device : VF-895N
AndroidVer: 5.0.2
Manufact. : Vodafone
QLMxCPU : MSM8916

DevInfo : MSM8916__Vodafone__Vodafone__ANDR_v5.0.2__VF-895N__VF-895N__VF-895N

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : nvram.img
[Read Ok] : perso.img
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : secro.img
[Read Ok] : splash.img
[Read Ok] : tctperso.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : misc.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 1693 MiB

Done!
Elapsed: 00:03:05

Reconnect Power/Cable!

MSM8916_Vodafone_VF-895N_ANDR_v5.0.2

[badxxxboy]

BEELINE smart 6 nvram MT6572

[TIGRa_MHC]

Vodafone VFD200

Operation.log

========================= Start =========================
2/13/2017 / 2:36:02 PM
================================================== =======
Card found: S/N : iTigra , v0134
Chinese Miracle II [SPD module] v 1.24

Start at : [2/13/2017 / 2:37:30 PM]
Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : VFD200
Model Brand : Vodafone
Model Device: P731V35
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_GOLLUMARLIN
CompileDate : 3/23/2016 2:14:24 AM
Project Ver : VDF-VFD200B01-UK03e
Model Ext : VFD 200

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:27

Reconnect Power/Cable!

Finish at : [2/13/2017 / 2:37:58 PM]

Start at : [2/13/2017 / 2:40:29 PM]
Operation : Read NV [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV

Read Ok , 0x00028DC8
Saved to : D:\MOBILE\_ANDROID\NVRAM Chinese Miracle 2\SC7731_CX_SPDNV_355575071815015.spdnv

Elapsed: 00:01:05

Reconnect Power/Cable!

Finish at : [2/13/2017 / 2:41:35 PM]

Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : VFD200
Model Brand : Vodafone
Model Device: P731V35
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_GOLLUMARLIN
Project Ver : VDF-VFD200B01-UK03e
Model Ext : VFD 200

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : fblogo_320x480.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1504 MiB
Saved to : D:\MOBILE\_ANDROID\NVRAM Chinese Miracle 2\SP7731GEA_GOLLUMARLIN_P731V35_5.1_VDF-VFD200B01-UK03e_VFD_200\
Done!

Elapsed: 00:05:50

Reconnect Power/Cable!

SP7731GEA_GOLLUMARLIN_P731V35_5.1_VDF-VFD200B01-UK03e_VFD_200
SP7731GEA_CX_SPDNV_355575071815015.spdnv

[deezee]

Info

Brand : teXet
ProdName : teXet
ProdModel : X-maxi
Device : teXet
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.412

EXTRA :
LCD [0] : nt35510_dsi_6572_fwvga_zgd
LCD Res : 854x480
TOUCH [0] : msg2133a
CAM [0] : s5k5eayx_yuv
CAM [1] : gc0329_yuv
MODEM : K18_WCDMAHSPA_MODEM_P2
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR hdpi

[slavkinj]

Read Firmware CM2 V1.58

Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594812A15E6BAE8F9D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE3111DF4FAEF80946CE81B8712
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : ThL
ProdName : bird77_a_cu_ics2
ProdModel : ThL W3
Device : bird77_a_cu_ics2
AndroidVer: 4.0.4
MTKxCPU : MT6577
MTKxPRJ : ThL.W3.121113.6577.COM.EN

[Read Ok] : preloader_bird77_a_cu_ics2.bin
[Read Ok] : DSP_BL
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6577 / V1.0.0 / bird77_a_cu_ics2 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 420 MiB

[Bexruz.19]

LG K350E NVM Backup !

Operation : Read Security [ v1.03 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ... 
Handshake passed!
Collect info... 
Prepare passed, mode 0x01
Boot done!

Reading NVM0
Reading NVM1

File saved to : C:\InfinityBox\LGS\Backup\MT6735_LG-K350E_K35011b.lgnv

Done!
Elapsed: 00:00:32

[badxxxboy]

micromax q340 nvram MT6582

[Mr.Sunn]

Brand : BRAVIS
ProdName : BRAVIS_POWER
ProdModel : BRAVIS POWER
Device : BRAVIS_POWER
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.10

[badxxxboy]

mtc smart run nvram MT6582
oysters t72Hms nvram МТ6572

[slavkinj]

Read firmware CM2 V1.58

Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : F40122426977696E2010000025D8A39B
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E2010000025D8A39B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID : 0x134E2FE3FCDBEA5D8D300D654DFDE3C6
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Ergo
ProdName : A502_Aurum
ProdModel : A502_Aurum
Device : A502_Aurum
AndroidVer: 6.0
CU_SWVer : V1.0.8
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P18

[Read Ok] : preloader_magc6580_weg_c_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / magc6580_weg_c_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2238 MiB
Scatter saved to : G:\Backup_CM2\Ergo\A502\MT6580__Ergo__A502_Aurum__ A502_Aurum__6.0__alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P18\

[Sid Vicious]

Operation : Check / Read Info [ v1.58 ]

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D4201A0D7B4BB12CD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D4201A0D7B4BB12CD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x0A4D5A6BFB04F0EEC7223CD6F89F9520
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : alps
ProdName : hexing82_cwet_kk
ProdModel : LenovoS90C
Device : hexing82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.11

MODEM :
BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V35_1_wg_n

EXTRA :
LCD [0] : otm9605a_dsi_vdo_qhd
LCD [1] : hx8389b_dsi_vdo_qhd
LCD Res : 960x540
TOUCH [0] : GT9XXV24
CAM [0] : hi551_mipi_raw
CAM [1] : hm5040_mipi_raw_8071chk
CAM [2] : ov5648_mipi_raw_8071chk
CAM [3] : ov5670_mipi_raw_8071chk
CAM [4] : gc2755_mipi_raw
CAM [5] : gc2235_mipi_raw
CAM [6] : gc2355_mipi_raw_8071chk
CAM [7] : gc2145_mipi_yuv
CAM [8] : gc0339_mipi_raw
CAM [9] : gc0310_mipi_yuv
MODEM : hexing82_cwet_wg_125_8071
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB

Done!

[deezee]

Archos 55 Helium Ultra NVRam

[deezee]

Prestigio PMP7280C 3G NVRAM

[andrik]

NW Prestigio psp3527

[Sid Vicious]

Operation : Check / Read Info [ v1.58 ]

Wait for phone...
Phone found! [ 26 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513858534142067A5BE8A491AD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX8
[eMMC] : FLASH_CID : 150100513858534142067A5BE8A491AD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x0A4D5A6BD555FC274F3FC42BD6C4632F
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Fly
ProdName : IQ4516_Octa
ProdModel : IQ4516 Octa
Device : IQ4516_Octa
AndroidVer: 4.4.2
MTKxCPU : MT6592
MTKxPRJ : ALPS.KK1.MP1.V2.10

MODEM :
BaseBand : MT6592_S00_MOLY_WR8_W1315_MD_WG_MP_V34_P12_1_wg_n

EXTRA :
LCD [0] : gn_samsung_ams480cz01
LCD Res : 1280x720
TOUCH [0] : gn_synaptics3402
CAM [0] : ov8858_mipi_raw
CAM [1] : ov8858_ofilm_mipi_raw
CAM [2] : s5k5e2ya_mipi_raw
CAM [3] : s5k5e2ya_ofilm_mipi_raw
MODEM : WBW5707_gionee92_gprs_hspa_mp_hspa
LOCALE : ru_RU uk_UA en_US ldpi hdpi mdpi xhdpi xxhdpi

Done!

[deezee]

ZTE Blade A910 NVRAM V2.0

Log

Brand : ZTE
ProdName : P635A31
ProdModel : ZTE BLADE A910
Device : P635A31
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : ZTE_BLADE_A910_V2.0

[slavkinj]

Read full CM2 V1.58

Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8B00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048601A3C8093135
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048601A3C8093135
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE3B67A9FE74C9C25F8100D19F9
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Read Ok , collect info
Brand : HUAWEI
ProdName : Y511-U30
ProdModel : HUAWEI Y511-U30
Device : HWY511-U
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1
Saved to : X:\Backup_CM2\Huawei_Y511-T00\MT6572__HUAWEI__HUAWEI_Y511-U30__Y511-U30__HWY511-U__ALPS.JB3.MP.V1__Android_4.2.2.ispff