Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2)

[yurii-62]

MT6582 Ixion EL150 (v1.48)

Brand : Ixion
ProdName : EL150
ProdModel : Ixion EL150
Device : EL150
AndroidVer: 5.0
MTKxCPU : MT6582
MTKxPRJ : ALPS.L0.MP2.V1_VSUN6582.WT.L_P12

NVRAM MT6582_Ixion EL150_S00_MOLY_WR8_W1449_MD_WG_MP_V1_1_wg_n_eMMC.s pnv

[fedja]

Lenovo_S898t+MT6592_S00_S898_ROM_V101_1_tg_n_eMMC. rar

[fedja]

S-TELL M615 MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P2_1_wg_n_eM MC

[deezee]

GSmart Roma R2 Rev.1 NVRAM
Info:

Operation : Check / Read Info [ v1.48 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3557564D42011F3E60BD8053
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVW5
[eMMC] : FLASH_CID : 1501004B3557564D42011F3E60BD8053
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x8660827B1F9E00D271F7E590981617F9
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : GSmart
ProdName  : Roma_R2
ProdModel : GSmart Roma R2
Device    : Roma_R2
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

SECURITY : 
IMEI_SW [1] : 358932050xxxxxx
IMEI_SW [2] : 358932050xxxxxx
BTMAC Addr  : 000046657201
WiFi MAC    : 000000000000

MODEM : 
BaseBand  : MT6572_S00_D208_PUBLIC_MP_F1A_V3_0_7_S1024_1_wg_n

EXTRA : 
LCD [0] : hx8379a_dsi_vdo_azet_ips
LCD [1] : ili9806c_dsi_vdo_azet_ips
LCD [2] : ili9806c_dsi_vdo_djn
LCD [3] : ili9806c_dsi_vdo_txd_ips
LCD [4] : otm8018b_dsi_vdo_djn
LCD [5] : otm8018b_dsi_vdo_trust
LCD Res : 800x480
TOUCH [0] : ft5206
TOUCH [1] : msg2133
CAM [0] : s5k5eayx_yuv
CAM [1] : gc2035_yuv
CAM [2] : gc0329_yuv
MODEM : d208_f1a_hspa_gemini
LOCALE : en_US zh_TW uk_UA ru_RU pl_PL cs_CZ tr_TR hu_HU ro_RO bg_BG de_DE es_ES fr_FR pt_PT sl_SI sk_SK lt_LT hr_HR ar_EG iw_IL zh_CN lv_LV el_GR fa_IR sr_RS hi_IN in_ID th_TH tl_PH vi_VN hdpi

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

[deezee]

Explay Stark NVRam (он же Turbopad 1014)

[uploads]

LG K5 X220ds

Operation : Read NVRAM [ v1.48 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 150 ]
Sync...
Open port error , something went wrong!
Boot Error!

Operation Failed
Elapsed: 00:00:07
Reconnect Power/Cable!


Operation : Read NVRAM [ v1.48 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 146 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513732534D420007B09096238D
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMS27
[eMMC] : FLASH_CID : 150100513732534D420007B09096238D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x57645BF9BA7A68E2259B7E2DC75F2CBA
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

USBDL : Init HSUSB Ok
[Info] : BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V23_P11_1_wg_n

NVM Read Ok, MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V23_P11_1_wg_n_ eMMC.spnv

Done!
Elapsed: 00:00:34
Reconnect Power/Cable!

[uploads]

lg x135

ЛОГ

Operation : Read NVRAM [ v1.48 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 146 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D4201E120EAE5C151
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x20000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201E120EAE5C151
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xA467995714B86B11B6FBEB2AEC925E83
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

USBDL : Init HSUSB Ok
[Info] : BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V36_P7_1_wg_n

NVM Read Ok, MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V36_P7_1_wg_n_e MMC.spnv

Done!
Elapsed: 00:00:54
Reconnect Power/Cable!

[fedja]

Lenovo_S650 MT6582_S00_S650_ROW_V109_1_wg_n_eMMC.spnv

[fedja]

PP3 v4.0_20140827_4.2.2_only_for_sn_PP3V414070001-PP3V414075000

[uploads]

Lenovo A328

лог

Operation : Read NVRAM [ v1.48 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 146 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1616.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040506A1CEE1817B
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040506A1CEE1817B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xB3E8E489CAC5E406A603DAC6C334574B
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

USBDL : Init HSUSB Ok
[Info] : BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_1_wg_n

NVM Read Ok, MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_1_wg_n_eMMC .spnv

Done!
Elapsed: 00:00:54
Reconnect Power/Cable!

[fedja]

Explay a240 TINNO60M_QVGA_11B_PCB01_gsm_MT6260_S00

[slavkinj]

CPU MT8321A

SUPRA M14BG read Firmware СМ2 v1.46

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : SUPRA M14BG
ProdName : SUPRA M14BG
ProdModel : SUPRA M14BG
Device : SUPRA M14BG
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_ELINK8321.EMMC_P8

[Read Ok] : preloader_elink8321_emmc.bin
[Read Ok] : items.img
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / elink8321_emmc / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1605 MiB
Scatter saved to : \\Slav-pc\f\Backup\Supra_M14BG\MT6580__SUPRA_M14BG__SUPRA _M14BG__SUPRA_M14BG__5.1__ALPS.L1.MP6.V2_ELINK8321 .EMMC_P8\

All done!

[valbn20]

Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 7C32AA2FCEEED9778297FB085CAB2C4F
BROM Protocol Version : 05

[Evil]

Lg G2 на MTK6572

Device Brand : alps
Device Model : a400
Device CPU : MT6572
Device IntName : a400
Device Version : 4.4.2
Device Compile : 29.12.2014 1:34:06
Device Project : ALPS.KK1.MP7.Band15.V03
Device ExtInfo : a400

[Read Ok] : preloader_a400.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img

Зеркало

[uploads]

Lenovo A916

лог

Operation : Read NVRAM [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 144 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42011F0BC616812B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42011F0BC616812B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x234B14793A354796A1ED61585DFCB251
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6290_S01_MOLY_LR9_W1423_MD_LWTG_MP_V3_P1_5_lwg_n

NVM Read Ok, MT6290_S01_MOLY_LR9_W1423_MD_LWTG_MP_V3_P1_5_lwg_n _eMMC.spnv

Done!
Elapsed: 00:00:45
Reconnect Power/Cable!

[Shishani]

Brand : Etuline
ProdName : u939e_2
ProdModel : ETL-S4521
Device : u939e_2
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : W864.6.02.03.RU00

Operation : Read NVRAM [ v1.48 ]

Operation : Read NVRAM [ v1.48 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040501A164666103
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040501A164666103
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x3A7C4C85E139534793C2B3B3C73F5C47
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

NVM Read Ok, Etuline S4521_MT6572_eMMC.spnv

[uploads]

BRAVIS_SPARK-full прошива не сливалась

лог

Operation : Read Flash [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 144 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1101003030344745300168525475928B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 1101003030344745300168525475928B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0xA7DE76A2E157D212B94FB6EE60686ADD
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Read Ok , collect info
Brand : Bravis
ProdName : Bravis
ProdModel : BRAVIS_SPARK
Device : Bravis
AndroidVer: 5.1
MTKxCPU : MT6572
MTKxPRJ : Bravis_Spark_Ru_V1.0.020151105
Saved to : C:\Users\1\Desktop\Bravis Spark\MT6572__BRAVIS__BRAVIS_SPARK__Bravis_Spark_R u_V1.0.020151105__Android_5.1.ispff

Done!
Elapsed: 00:17:00
Reconnect Power/Cable!

[denis78]

LG-D686 MT6577_S00_MAUI_11AMD_TC1_SP2_V34_1_3g_n_eMMC.spnv

[abdounne]

NVram lenovo a2860_MT6735_S
Salam

NVram For Andy E5i CPu type :MT6572
Salam

NVram For Huawei Holy U19 Cpu Type :Mt6582
Salam

[uploads]

Bravis Major

лог

Operation : Read Flash [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 178 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 4B4EDB16EDD13B568870478C7EF46FCE
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : Not exists
Reading Flash Content now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : R058R_PCB01_gprs_MT6261_S00.R058R_BRAVIS_MAJOR_HW1 _V02_151020.bin
FileVersion : R058R_BRAVIS_MAJOR_HW1_V02_151020
Saved to : C:\InfinityBox\CM2MTK\Read_out\R058R_PCB01_gprs_MT 6261_S00.R058R_BRAVIS_MAJOR_HW1_V02_151020.bin

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!