Успешное применение, без комментариев [CM2MTK MediaTek]

[gulka]

Прошивка Firmware nokia china L8star GTSTAR BM10

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 116 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CA02
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 1CF9DDFBECA6CEED45A070E12B8CAAD6
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003F8000 , 0x00008000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : JT61D_M100_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2.bin
FileVersion : MAUI.11C.W13.52.MP.V2
Saved to : C:\InfinityBox\CM2MTK\Read_out\JT61D_M100_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

[Хасен]

Brand : Mate6+
ProdName : Mate6+
ProdModel : U2
Device : Mate6+
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

Samsung Mate 6+ NV MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P2_1_wg_n_eM MC.spnv

[gulka]

BQ-5301 Strike View Прошивка, Firmware

Operation : Identify [ v2.02 ]

Operation : Identify [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM66)
MODE : BOOTROM
PORT : 66
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
MODE : BQ : SEC_LEGACY | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_V3800AN.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 450001704545384867280138A955486A
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 7001004548384545380128676A4855A9
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
INIT : 0xBC : LP/DDR3 [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1,00 GB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 7001004548384545380128676A4855A9
EMMC: VEN : KINGSTON | OEM : 01 | DEV : EH8EE8
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x1C8000000 [ 7,13 GB ]

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6C7988879780DDEB7CCE0BF47B41B22

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM77)
MODE : PRELOADER PORT
PORT : 77

Boot done!

Patch Level : NRD90M
Display ID : NRD90M
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2018-07-05
Build Time : 1521196919
Product Model : BQ-5301
Product Brand : BQru
Product Name : BQru-5301
Product Device : BQru-5301
Product Board : BQru-5301
Product Manfct : BQru
Board Platform : mt6580
Product Info : BQru-5301

USERDATA : PLAIN ( NOT encrypted )


Done!
Elapsed: 00:00:35

Operation : Read Firmware [ v2.02 ]

Operation : Read Firmware [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM66)
MODE : BOOTROM
PORT : 66
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
MODE : BQ : SEC_LEGACY | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_V3800AN.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 450001704545384867280138A955486A
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 7001004548384545380128676A4855A9
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
INIT : 0xBC : LP/DDR3 [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1,00 GB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 7001004548384545380128676A4855A9
EMMC: VEN : KINGSTON | OEM : 01 | DEV : EH8EE8
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x1C8000000 [ 7,13 GB ]

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6C7988879780DDEB7CCE0BF47B41B22

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM77)
MODE : PRELOADER PORT
PORT : 77

Boot done!

Patch Level : NRD90M
Display ID : NRD90M
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2018-07-05
Build Time : 1521196919
Product Model : BQ-5301
Product Brand : BQru
Product Name : BQru-5301
Product Device : BQru-5301
Product Board : BQru-5301
Product Manfct : BQru
Board Platform : mt6580
Product Info : BQru-5301

MT6580__BQru__BQ-5301__7.0__NRD90M__NRD90M__BQru-5301

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 10%
Read : cache.img
Read : userdata.img

FW Size : 2,63 GB
Android Info saved : _Android_info.txt
Scatter : MT6580_Android_scatter.txt
Saved to : C:\Users\irchi10\Desktop\MT6580__BQru__BQ-5301__7.0__NRD90M__NRD90M__BQru-5301\

Done!
Elapsed: 00:09:59

[gulka]

Ulcool V36 Firmware Прошивка

Operation : Read Flash [ v1.58 ]

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 40 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CA02
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 97EFA1409670923326FA6E128B2CA02E
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : MTK61D_BTNEW_11C_PCB01_gprs_MT6261_S00.T5_YLK_LANG UAGE9_ULCOOL_V1_0.bin
FileVersion : T5_YLK_LANGUAGE9_ULCOOL_V1.0

[ScatCFG] : MT6261 / T5_YLK_LANGUAGE9_ULCOOL_V1.0 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\MTK61D_BTNEW_11C_PC B01_gprs_MT6261_S00\

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!

[gulka]

BQ-5302G Velvet 2 Прошивка Firmware

Operation : Read Firmware [ v2.05 ]

Operation : Read Firmware [ v2.05 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM114)
MODE : BOOTROM
PORT : 114
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BOOTROM
MODE : BQ : SEC_LEGACY | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_V3610AN.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 4500017044433848FB2E01387755EBFD
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 700100454838434438012EFBFDEB5577
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
INIT : 0xBC : LP/DDR3 [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1,00 GB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 700100454838434438012EFBFDEB5577
EMMC: VEN : KINGSTON | OEM : 01 | DEV : EH8CD8
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x1D2800000 [ 7,29 GB ]

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : BCD1612B6366D5087E5FA52218A4AB9D

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM115)
MODE : PRELOADER PORT
PORT : 115

Boot done!

Patch Level : O11019
Display ID : O11019 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-09-05
Build Time : 1539339820
Product Model : BQ-5302G
Product Brand : BQru
Product Name : BQru-5302G
Product Device : BQru-5302G
Board Platform : mt6580
Product Manfct : BQru
Product Info : k80_bsp
Product Board : BQru-5302G
Board Platform : mt6580

MT6580__BQru__BQ-5302G__8.1.0__O11019__k80_bsp


SecureDevice : Paired type!
-> INFO : That device WILL dead after ReadOut Flashing!
-> INFO : Only partial flashing ( f.e. SYSTEM, VENDOR and etc. ) available!
-> INFO : In most cases you can "unsecure" device in Engineer mode

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : persist.img
ExtSparse : Compression ratio : 100%
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : odmdtbo.img
Read : vendor.img
ExtSparse : Compression ratio : 55%
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 25%
Read : cache.img
Read : userdata.img

FW Size : 1,30 GB
Android Info saved : _Android_info.txt
Scatter : MT6580_Android_scatter.txt
Saved to : D:\MT6580__BQru__BQ-5302G__8.1.0__O11019__k80_bsp\

Done!
Elapsed: 00:06:55

[gulka]

Philips E109 Firmware прошивка

Operation : Read Flash [ v1.58 ]

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 25 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 295476E5F230390FA051747603824944
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : PB23D_E109_PHILIPS_ER_PCB01_gprs_MT6261_S00.E109_M 6261D_1919_V15A_CIS.bin
FileVersion : E109_M6261D_1919_V15A_CIS

[ScatCFG] : MT6261 / E109_M6261D_1919_V15A_CIS / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\PB23D_E109_PHILIPS_ ER_PCB01_gprs_MT6261_S00\

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

------------------------------------------------

Philips E125 Firmware прошивка

Operation : Read Flash [ v1.58 ]

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 25 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 1710CB1CD276E132C47775C23BC0DFBA
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00300000
SDS_INFO : 0x002FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info : FLYCOM61M_M116F_E125_RU_PCB01_gprs_MT6261_S00.E125 _M6261M_1911_V07A_RU.bin
FileVersion : E125_M6261M_1911_V07A_RU

[ScatCFG] : MT6261 / E125_M6261M_1911_V07A_RU / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\FLYCOM61M_M116F_E12 5_RU_PCB01_gprs_MT6261_S00\

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!

[uploads]

Alcatel 9007X

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 04AAAA50
ID_BLOCK_E : 00420011
ID_BLOCK_L : FBC6975C8077347E8D727219C4FE21E3
ID_BLOCK_L : F67FEB21B79A0DF9083D86DE1E3B5F07
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand     : TCL
ProdName  : 9007X
ProdModel : 9007X
Device    : pixi37
AndroidVer: 5.1.1
Manufact. : TCL
QLMxCPU   : MSM8909

DevInfo : MSM8909__TCL__TCL__ANDR_v5.1.1__9007X__pixi37__9007X

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : nvram.img
[Read Ok] : perso.img
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : secro.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : splash.img
[Read Ok] : tctperso.img
[Read Ok] : cache.img
[Read Ok] : misc.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 2408 MiB

Done!
Elapsed: 00:08:33

Reconnect Power/Cable!

[gulka]

samsung A70 Firmware Прошивка

Operation : Read Firmware [ v2.07 ]

Operation : Read Firmware [ v2.07 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM64)
MODE : PRELOADER PORT
PORT : 64
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1944 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6570
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00018000 [ 96,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]

EMMC: 1501004B355530304D02918B317650DF
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : K5U00M
EMMC:
BOOT1 : 0x00200000 [ 2,00 MB ]
BOOT2 : 0x00200000 [ 2,00 MB ]
RPMB : 0x00020000 [ 128,00 KB ]
USER : 0xE9000000 [ 3,64 GB ]

CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B4C50F2381B0FFCFFC0DED09FF6F9198

DA : USB : HIGH-SPEED

Boot done!

Patch Level : MRA58K
Display ID : MRA58K test-keys
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-03-05
Build Time : 1572064678
Product Model : A70
Product Brand : welcome
Product Name : A70
Product Device : A70
Product Manfct : welcome
Board Platform : mt6570
Product Info : A70

MT6570__welcome__A70__6.0__MRA58K__A70

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : md1rom.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 9%
Read : cache.img
Read : userdata.img

FW Size : 1,70 GB
Android Info saved : _Android_info.txt
Scatter : MT6570_Android_scatter.txt
Saved to : C:\Users\irchi10\Desktop\MT6570__welcome__A70__6.0 __MRA58K__A70\

Done!
Elapsed: 00:05:34

[XURSAND]

HOMTOM S99 Format Ok : RESET PROTECTION

Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 880103534C4436344720C9461A57B521
        EMMC: VEN : FORESEE | OEM : 301 | DEV : SLD64G
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0xE67800000 [ 57,62 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6B1282562BB624B64F4B7B8C8E51BDBF

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O00623
Display ID     : HOMTOM-HTS99-Android_8.0-R12-20181012
Ver. CodeName  : REL
Ver. Release   : 8.0.0
Sec. Patch     : 2018-10-05
Build Time     : 1539249572
Product Model  : S99
Product Brand  : HOMTOM
Product Name   : S99
Product Device : S99
Product Board  : S590AD
Product Manfct : HOMTOM
Product Info   : S99
Product Board  : k50v1_64
Board Platform : mt6750
Build Time     : 1539249572
Ver. Release   : 8.0.0

USERDATA : ENCRYPTED 

IMEI[0] : 3590880903xxxxx
IMEI[1] : 3590880903xxxxx
NVRAM check : Passed!

Done!
Elapsed: 00:00:42

Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 880103534C4436344720C9461A57B521
        EMMC: VEN : FORESEE | OEM : 301 | DEV : SLD64G
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0xE67800000 [ 57,62 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6B1282562BB624B64F4B7B8C8E51BDBF

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION
Format Ok : PRIVACY

Done!
Elapsed: 00:00:25

Reconnect Power/Cable!

[mrstillen]

Здравствуйте осталась ли у кого прошивка из поста 186

[gulka]

Galaxy S6 SM-G920 ПРОШИВКА

Operation : Read Flash [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 4501004453323030380101181F98428B
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 8002S
[eMMC] : FLASH_CID : 4501004453323030380101181F98428B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x0CF0995C0482FD5896D9C5042DFC8007
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : samsung
ProdName  : Galaxy S6
ProdModel : SM-G920
Device    : Galaxy S6
AndroidVer: 5.0.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP2.V1_CELL6582.WT.L_P7

[Read Ok] : preloader_cell6582_wt_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / cell6582_wt_l / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1305 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6582__samsung__SM-G920__Galaxy_S6__5.0.2__ALPS.L0.MP2.V1_CELL6582.WT.L_P7\

All done!

Done!
Elapsed: 00:09:05
Reconnect Power/Cable!

[gulka]

Samsung G900 Прошивка

Operation : Read Flash [ v1.49 ]

Power Off Phone , re-connect battery ,  Insert USB cable!

Wait for phone...
Phone found! [ 6 ]
Sync...
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/00/NIM_Px-2
DEV RID    : 0xE3C13D752D26CCB7C03D965E05950B22
INT RAM    : 0x00020000
EXT RAM    : 0x10000000 [256 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

[Read Ok] : preloader_benrui71_e_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6571 / V1.1.1 / benrui71_e_lca / NAND
FW Size : 330 MiB

Brand     : alps
ProdName  : benrui71_e_lca
ProdModel : MT6571
Device    : benrui71_e_lca
AndroidVer: 4.2.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.JB7.MP.V1.14

Android Info saved

Scatter saved to : C:\Users\TIMUR\Desktop\MT6571_NAND_alps__MT6571__benrui71_e_lca__4.2.2__ALPS.JB7.MP.V1.14

Done!
Elapsed: 00:03:31
Reconnect Power/Cable!

[gulka]

BQ STRIKE BQS-5020 ПРОШИВКА

Operation : Read Flash [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505075155A84E33E5
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505075155A84E33E5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xA0AD09217912A0F4AD739F0D2066AC31
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : BQ
ProdName  : BQS-5020
ProdModel : BQS-5020
Device    : BQS-5020
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.W10.24.p0

[Read Ok] : preloader_v3702.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v3702 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1571 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6580__BQ__BQS-5020__BQS-5020__6.0__ALPS.W10.24.p0\

All done!

Done!
Elapsed: 00:11:33
Reconnect Power/Cable!

[gulka]

BQ BQS 5006 Los Angeles ПРОШИВКА

Operation : Read Flash [ v1.49 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505073480927413F5
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505073480927413F5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x84B157376F4CBCD03A9174A93EC69F47
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : BQ_Mobile
ProdName  : BQ_Mobile
ProdModel : BQS-5006
Device    : BQ_Mobile
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : BQS5006-20160118-DGs0139F

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1391 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6580__BQ_Mobile__BQS-5006__BQ_Mobile__5.1__BQS5006-20160118-DGs0139F\

All done!

Done!
Elapsed: 00:06:21
Reconnect Power/Cable!