Ошибки и обсуждение [ CM2MT2_v2.00]

[Mag25su]

Meizu U10 со слов клиента стер Flash Tool
Теперь не прошивается. Мертвая EMMC или я что то не так делаю?

Operation : Write Flash [ v2.00 r4 ]

Repartition  : Enabled
Flash Verify : Enabled
Pre-Erase    : Enabled
Verify HW/SW : Enabled
XData Backup : Disabled

Files :16
[FL] : Set : preloader_U10.bin
[FL] : Set : preloader_U10.bin
[FL] : Set : recovery.img
[FL] : Set : custom.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : md1arm7.img
[FL] : Set : md3rom.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : trustzone.bin
[FL] : Set : trustzone.bin
[FL] : Set : system.img
[FL] : Set : userdata.img

[FL] : Total size : 0xA94647F0 [ 2,64 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode  : SBC+SLA+SDA
BROM : PRELOADER PORT
MODE : Meizu : M3s_M5n_U10 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x80000000 [ 2,00 GB ]

        EMMC: 150100513832334D4200CEF7960C93CB
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : Q823MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x3A3E00000 [ 14,56 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

        RNID : 69A2F471CF304E625A465F3E171C0EA3

DA : USB : HIGH-SPEED

Boot done!


[FL] : HW verification passed!

[FL] : RePartition 
ERR : 0xC0020004
ERR : SEC_DL_FORBIDDEN
ERR : 0x00000000|0x00004400

Error : Flashing failed!
Seems as some of MANDATORY section of FW is damaged! If device alive and work - send report!

Reconnect Power/Cable!