Ошибки и обсуждение [ CM2MT2_v2.00]

[yurii-62]

UMIDIGI S2 LITE

Operation : Read Firmware [ v2.00 r3 ]

Reconnect Power/Cable!

Operation : Read Firmware [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 150100525831344D4207E69ED8C2147D
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX14MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 80C8DE42312FCEDC6781A1BCF261272

DA : USB : FULL-SPEED

Boot done!

Patch Level    : NRD90M
Display ID     : UMIDIGI S2 LITE_V1.0_20180402
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-10-05
Build Time     : 1522652602
Product Model  : S2 LITE
Product Brand  : UMIDIGI
Product Name   : S2 LITE
Product Device : S2 LITE
Product Manfct : UMIDIGI
Board Platform : mt6750
Product Info   : wtk6750_66_n

MT6750__UMIDIGI__S2_LITE__7.0__UMIDIGI_S2_LITE_V1.0_20180402__NRD90M__wtk6750_66_n

Unsupport : 0x000000000DE00000 : 0x0000000000A00000 : teeinfo

Error : Device NOT supported for SAVE READ!
Send log and report.log (if exists) to support! Include device info also!

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 11 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0002
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D4207E69ED8C2147D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xE35D677E80C8DE42312FCEDC06781A1B
INT RAM    : 0x00000000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : UMIDIGI
ProdName  : S2 LITE
ProdModel : S2 LITE
Device    : S2 LITE
AndroidVer: 7.0
MTKxCPU   : MT6755
MTKxPRJ   : alps-mp-n0.mp7-V1_wtk6750.66.n_P22

[Read Ok] : preloader_wtk6750_66_n.bin
[Read Ok] : recovery.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : md3img.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Stop] : Unknow data!
Make next steps : 
1. Use WinRar or 7zip and rar this folder : MT6755__UMIDIGI__S2_LITE__S2_LITE__7.0__alps-mp-n0.mp7-V1_wtk6750.66.n_P22
2. Send this archive with title "FWFACT" to rd@infinity-box.com

Read error :(

Operation Failed
Elapsed: 00:00:42
Reconnect Power/Cable!