Ошибки и обсуждение [CM2QLM Qualcomm]

[motokmips]

Принесли висящим на заставке, QPST не прошивает, скачал MSM8610__LENOVO__Lenovo__ANDR_v4.3__Lenovo_S580__S 580__S580

Operation : Flash [ v1.11 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 068E8FDD
ID_BLOCK_I : 008140E1
ID_BLOCK_L : EA1A708E29B5A2AD9ACF010EC9902028
ID_BLOCK_L : 453886292AB525AE2392C73C36F9F7D4
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Files in Chain : 17
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : NON-HLOS.bin
Flashing : boot.img
Flashing : system.img
ProgStart  : start 282688, num 704
Flash Error , No ACK message! Check Battery charge , Cable

Error : Flashing failed!
Check previous message for more info!

Reconnect Power/Cable!

Висит на записи system.img пока кабель не вытащить.

[shoxa907]

Новой версии замечена ошибка.

Micromax Q415 Reset FRP...

Operation : Reset Settings [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 0553F206
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 83651FE756DCC9C4A3987865A2F97951
ID_BLOCK_L : 0E45CB6257FE60E518D7B87173B2ACAF
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.11


Operation : Reset Settings [ v1.11 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 0553F206
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 83651FE756DCC9C4A3987865A2F97951
ID_BLOCK_L : 0E45CB6257FE60E518D7B87173B2ACAF
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ] 
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:14

Reconnect Power/Cable!