Ошибки и обсуждение [CM2QLM Qualcomm]

[yurii-62]

Alcatel 5054D [MSM8909] 5.1.1

Operation : Identify [ v1.01 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 04789CB3
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!


Brand : TCL
ProdName : 5054D
ProdModel : 5054D
Device : Pop355
AndroidVer: 5.1.1
Manufact. : TCL
QLMxCPU : MSM8909

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!



Operation : Read Flash [ v1.01 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 04789CB3
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!


Brand : TCL
ProdName : 5054D
ProdModel : 5054D
Device : Pop355
AndroidVer: 5.1.1
Manufact. : TCL
QLMxCPU : MSM8909

DevInfo : MSM8909__TCL__TCL__ANDR_v5.1.1__5054D__Pop355__505 4D

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : nvram.img
[Read Ok] : perso.img
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : secro.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : splash.img
[Read Ok] : tctperso.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 1664 MiB

Done!
Elapsed: 00:06:24

Reconnect Power/Cable!

Alcatel 5054D [MSM8909] 5.1.1 с пол оборота
ЗЫ.
Жду что появиться на MSM8916 6 дройде, в сервисе пока ничего нет...

ЗЫЫ Alcatel 6039Y пришёл с разбитым модулем, если мать жива сегодня завтра попробую...

Operation : Identify [ v1.01 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!


Operation : Identify [ v1.01 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 14414A5C
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 3968074000692755
ID_BLOCK_L : DBB48428A6C7F5FA
Use CM2 Internal Loader

Error : Loader send failed!  :(
Check cable, connection and drivers!

Alcatel 6039Y дройд 6...