Успешное применение, без комментариев [InfinityBox CM2 SPD]

[gulka]

ZTE Blade AF5 Прошивка Pac

Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ... 

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : P731A20
Model Brand : ZTE
Model Device: P731A20
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : ZTE_Blade_AF5V1.0.0B03
Model Ext   : ZTE T230

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.29.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1235 MiB
Saved to : C:\Users\TIMUR\Desktop\SP7731GEA_P731A20_4.4.2_ZTE_Blade_AF5V1.0.0B03_ZTE_T230\
Done!

Elapsed: 00:05:01

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.22 ]

Target : SP7731GEA_P731A20_4.4.2_ZTE_Blade_AF5V1.0.0B03_ZTE_T230
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7731g_modem_CP2_WCN_14E_W15.29.4_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : fblogo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:02:29

Saved to : SP7731GEA_P731A20_4.4.2_ZTE_Blade_AF5V1.0.0B03_ZTE_T230.pac
Done!