Ошибки и обсуждения модуля [InfinityBox CM2 SPD]

[DrManila]

Operation : Check/Read Info [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
Loader start failed! Wrong Model selection!
Boot failed!

Reconnect Power/Cable!

BQ 7008G
http://bq-mobile.com/catalog/planshe...rase_id=529920
Соответственно выбран вариант SP [SC5735] eMMC [Generic].
Как быть? Нужно слить с одно планшета и залить в другой.

[gulka]

8830 бут выбери и пойдет
------------------------------------------------
Добавлено позже:

Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 147 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf      
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 147 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf      
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : BQ7008G
Model Brand : BQ
Model Device: BQ7008G
AndrVersion : Android 4.4.2
BaseBand CPU: BQ7008G
Project Ver : BQ7008G-20160330-BSM0433G
Model Ext   : BQ7008G

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc8830_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_768x1024.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 843 MiB
Saved to : C:\Users\TIMUR\Desktop\BQ7008G_BQ7008G_Android_4.4.2_BQ7008G-20160330-BSM0433G_BQ7008G\
Done!

Elapsed: 00:07:56

Reconnect Power/Cable!

Записи старые , но ничего не изменилось все также через 8830