Ошибки и обсуждения модуля [InfinityBox CM2 SPD]

[gulka]

Сообщение от JayDi

Относительно первой подсказки - тушка включается? Софт ждет подключения по адб, по идее.

Дождался все же второго этапа

Optima Prime 3G TT7000PG Прошивка PAC



Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf      
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf      
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : Optima Prime 3G TT7000PG
Model Brand : DIGMA
Model Device: TT7000PG
AndrVersion : 4.4.2
BaseBand CPU: SP5735C2EA
Project Ver : MID_user_20160519
Model Ext   : Optima Prime 3G TT7000PG

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc8830_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_768x1024.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 703 MiB
Saved to : C:\Users\TIMUR\Desktop\SP5735C2EA_TT7000PG_4.4.2_MID_user_20160519_Optima_Prime_3G_TT7000PG\
Done!

Elapsed: 00:07:29

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SP5735C2EA_TT7000PG_4.4.2_MID_user_20160519_Optima_Prime_3G_TT7000PG
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL
Rebuild data required ... 
Rebuild Ok!
Rebuild data required ... 
Rebuild Ok!

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc8830_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
[ADD FILE] : logo_1024x600.bin
[ADD FILE] : fblogo_768x1024.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:17

Saved to : SP5735C2EA_TT7000PG_4.4.2_MID_user_20160519_Optima_Prime_3G_TT7000PG.pac
Done!