Успешное применение, без комментариев [InfinityBox CM2 SPD]

[gulka]

BQS-5501 Kawasaki прошивка PAC

Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : scx35_sp7731gea_lm_fs031_project
Model Brand : BQS
Model Device: scx35_sp7731gea_lm_fs031
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_LM_FS031
Project Ver : FS031M03_K10_WD_OBOI_G4W18_QHD_V05_64X8_BT_FM_WIFI_GPS_ACC_PLS_2SIM_20151023_1553
Model Ext   : BQS-5501

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 1009 MiB
Saved to : C:\Users\TIMUR\Desktop\SP7731GEA_LM_FS031_scx35_sp7731gea_lm_fs031_4.4.2_FS031M03_K10_WD_OBOI_G4W18_QHD_V05_64X8_BT_FM_WIFI_GPS_ACC_PLS_2SIM_20151023_1553_BQS-5501\
Done!

Elapsed: 00:06:11

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SP7731GEA_LM_FS031_scx35_sp7731gea_lm_fs031_4.4.2_FS031M03_K10_WD_OBOI_G4W18_QHD_V05_64X8_BT_FM_WIFI_GPS_ACC_PLS_2SIM_20151023_1553_BQS-5501
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7731g_modem_CP2_WCN_14E_W15.31.1_Release.bin
[ADD FILE] : logo_540x960.bin
[ADD FILE] : fblogo_540x960.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0017
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:53

Saved to : SP7731GEA_LM_FS031_scx35_sp7731gea_lm_fs031_4.4.2_FS031M03_K10_WD_OBOI_G4W18_QHD_V05_64X8_BT_FM_WIFI_GPS_ACC_PLS_2SIM_20151023_1553_BQS-5501.pac
Done!