Ошибки и обсуждения модуля [InfinityBox CM2 SPD]

[gulka]

Сообщение от gulka

SPD SC7731C DIGMA LINX A400 3G
Будет поддержка таких?

 ====  Wait for phone...

Phone found! [ 41 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
                 
Boot failed!

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 41 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
                 
Boot failed!

Reconnect Power/Cable!

Обновление не помогло

Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
                 
Boot failed!

Reconnect Power/Cable!

Finish at : [07.09.2016 / 16:07:09]

Start  at : [07.09.2016 / 16:07:38]
Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
                 
Boot failed!

Reconnect Power/Cable!

Finish at : [07.09.2016 / 16:07:54]

Start  at : [07.09.2016 / 16:08:13]
Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
                 
Boot failed!

Reconnect Power/Cable!

Finish at : [07.09.2016 / 16:08:34]

Start  at : [07.09.2016 / 16:09:06]
Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SC7731 Crev eMMC Loader v1.0     
Initial Boot Failed!

Reconnect Power/Cable!

Finish at : [07.09.2016 / 16:09:07]

Start  at : [07.09.2016 / 16:09:10]
Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
                 
Boot failed!

Reconnect Power/Cable!

Finish at : [07.09.2016 / 16:09:32]

Start  at : [07.09.2016 / 16:09:58]
Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
                 
Boot failed!

Reconnect Power/Cable!

Finish at : [07.09.2016 / 16:10:20]

Start  at : [07.09.2016 / 16:10:47]
Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
Boot failed!
                 
Boot failed!

Reconnect Power/Cable!

[gulka]

DIGMA OPTIMA prime 3G SC3755C

не поддерживается

Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Boot Files missing! Select SLDR or PAC file!
Boot failed!

Reconnect Power/Cable!