Ошибки и обсуждение [CM2QLM Qualcomm]

[JayDi]

Скорее всего - не будет, файлы не особо помогут. Без тушки чет делать смысла не имеет. Если попадется - проверю.

[motokmips]

LG D285 не включается, потребление 75мА,

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.08
Operation : Identify [ v1.08 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 051CF80B
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 986802FC5BC7CCFFA89D7758A7E2725A
ID_BLOCK_L : F78E309B9C07B73CD11C71AEA44B6566
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!


Error : Failed to read initial info! Erased/Damaged device???
Check cable, connection and drivers!
Reconnect Power/Cable!

Пробовал восстановить BoardDiag не проходит, может у кого прошивка есть под CM2?!

[chekm]

Делать было не чего
Samsung sm-j510f
-----------------
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 22BA7FCB
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 9CA30E850D860A487996BBF89054127A
ID_BLOCK_L : 6EC869562B25A2B216B5E0759A57D816
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[JayDi]

Очень похоже на помершую eMMC.

[motokmips]

ASUS ZB500KL - ошибка

Operation : Identify [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 041AD3F2
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 304133F0C39CF36BDD74E212E63A8B49
ID_BLOCK_L : 16007FDAAFA46D3A21CEC5433A193B34
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[motokmips]

ASUS ZB452KG - ошибка

Operation : Identify [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 0B60E09C
ID_BLOCK_I : 008140E1
ID_BLOCK_L : 0C73DF8AB50A91E39E8AB7CF9398E954
ID_BLOCK_L : D404EE65D71663381A4613604ADD2EC6
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[gulka]

Xiaomi Mi5 не поддерживается

Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_S : 8DD3674F
ID_BLOCK_I : 009470E1
ID_BLOCK_L : ADC0D2618F66030763D75EA06548B258
ID_BLOCK_L : 2965E28F78FF2D8BDB4A651FF697A954
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported yet CPU!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[Spiridv]

Xiomi Readmi S3
Не может сбросить пароль, и книгу вычитать, криптованный говорит

Юзеркод

Operation : Reset UserLocks [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 00E7470A
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : 044DDEFC404789ECE5FF493C9002FADD
ID_BLOCK_L : B14F259C537A6CC2BD0CC5C0BF2FFBAE
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : Q313MB
Boot Ok!


Error : FS verification fail! Encrypted or damaged!

Reconnect Power/Cable!

Фонбук

Operation : Recovery UserData [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 00E7470A
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : 044DDEFC404789ECE5FF493C9002FADD
ID_BLOCK_L : B14F259C537A6CC2BD0CC5C0BF2FFBAE
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : Q313MB
Boot Ok!


Error : FS verification fail! Encrypted or damaged!

Reconnect Power/Cable!

[Koka2]

Планируется работа с MSM8225Q ?

[alexey333]

LeEco x527 reset frp

Identify

Operation : Identify [ v1.09 ]
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 0384B34A
ID_BLOCK_I : 009900E1
ID_BLOCK_L : EFBC232D58259A9A5A03F8AF1FA61358
ID_BLOCK_L : B99FC1F3D7BF1F2F7DDE9E1F2F1511BD
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!
Brand : LeEco
ProdName : Le2_WW
Device : le_s2_ww
AndroidVer: 6.0.1
Manufact. : LeMobile
QLMxCPU : MSM8952
QLMxPRJ : IMXOSOP5801607291S
Done!
Elapsed: 00:00:14

Read Flash

Operation : Read Flash [ v1.09 ]
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 0384B34A
ID_BLOCK_I : 009900E1
ID_BLOCK_L : EFBC232D58259A9A5A03F8AF1FA61358
ID_BLOCK_L : B99FC1F3D7BF1F2F7DDE9E1F2F1511BD
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!
Brand : LeEco
ProdName : Le2_WW
Device : le_s2_ww
AndroidVer: 6.0.1
Manufact. : LeMobile
QLMxCPU : MSM8952
QLMxPRJ : IMXOSOP5801607291S
DevInfo : MSM8952__LeMobile__LeEco__ANDR_v6.0.1__le_s2_ww__L e2_WW__IMXOSOP5801607291S
ReportFile : C:\InfinityBox\CM2QLM\QLM_report.log
Send report to mail : with title "QFW" !
Info : Device is not supported yet!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Remove FRP

Operation : Reset Settings [ v1.09 ]
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 0384B34A
ID_BLOCK_I : 009900E1
ID_BLOCK_L : EFBC232D58259A9A5A03F8AF1FA61358
ID_BLOCK_L : B99FC1F3D7BF1F2F7DDE9E1F2F1511BD
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!
Remove FRP ( Google Reset Protection )
FRP removed!
Done!
Elapsed: 00:00:22

[Dr_Wolodya]

Xiaomi Redmi 3s (MSM8937) после прошивки и конекта к WiFi оказалась привязка к MI Account.

Reset Xiaomi Account

Operation : Reset Settings [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 005F46A3
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : BBE46743E9F820730256E2A539A5557A
ID_BLOCK_L : 29D7AD04CBE2E43A25845D4837A77336
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : Q313MB
Boot Ok!


MIAccount reset passed!

Normal reset :
> Select "FORCED FIX" or "REPAIR" in FMT settings, press "Format FS / Reset Settings"
> PowerOn device and use. IF Device stuck on black screen with cable - use another FMT
> Not all devices supported yet! (tested on Hydrogen,Land,Redmi2)

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!

Forced Fix

Operation : Reset Settings [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 005F46A3
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : BBE46743E9F820730256E2A539A5557A
ID_BLOCK_L : 29D7AD04CBE2E43A25845D4837A77336
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : Q313MB
Boot Ok!

Repair block Ok!
Repair block Ok!
Repair block Ok!
Forced Fix Ok!

Done!
Elapsed: 00:00:07

Reconnect Power/Cable!

Repair DATA

Operation : Reset Settings [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 005F46A3
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : BBE46743E9F820730256E2A539A5557A
ID_BLOCK_L : 29D7AD04CBE2E43A25845D4837A77336
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : Q313MB
Boot Ok!

MSC format Ok!
USERDATA format Ok!
CACHE format Ok!

Done!
Elapsed: 00:01:07

Reconnect Power/Cable!

После всех возможных сбросов привязка к MI аккаунту так и осталась.

[ssaammaa]

[QUOTE=Dr_Wolodya;510295]Xiaomi Redmi 3s (MSM8937) после прошивки и конекта к WiFi оказалась привязка к MI Account.

Reset Xiaomi Account

Operation : Reset Settings [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 005F46A3
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : BBE46743E9F820730256E2A539A5557A
ID_BLOCK_L : 29D7AD04CBE2E43A25845D4837A77336
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : Q313MB
Boot Ok!


MIAccount reset passed!

Normal reset :
> Select "FORCED FIX" or "REPAIR" in FMT settings, press "Format FS / Reset Settings"
> PowerOn device and use. IF Device stuck on black screen with cable - use another FMT
> Not all devices supported yet! (tested on Hydrogen,Land,Redmi2)

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!

Forced Fix

Operation : Reset Settings [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 005F46A3
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : BBE46743E9F820730256E2A539A5557A
ID_BLOCK_L : 29D7AD04CBE2E43A25845D4837A77336
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : Q313MB
Boot Ok!

Repair block Ok!
Repair block Ok!
Repair block Ok!
Forced Fix Ok!

Done!
Elapsed: 00:00:07

Reconnect Power/Cable!

Repair DATA

Operation : Reset Settings [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 005F46A3
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : BBE46743E9F820730256E2A539A5557A
ID_BLOCK_L : 29D7AD04CBE2E43A25845D4837A77336
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : Q313MB
Boot Ok!

MSC format Ok!
USERDATA format Ok!
CACHE format Ok!

Done!
Elapsed: 00:01:07

Reconnect Power/Cable!

После всех возможных сбросов привязка к MI аккаунту так и осталась.[/QUOTE
через что это делать?

[motokmips]

XiaoMi MI5 -

Operation : Identify [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_S : FDB0D0ED
ID_BLOCK_I : 009470E1
ID_BLOCK_L : 036674CF29C8E1E90569FC4287EE0CFE
ID_BLOCK_L : CCBA0D6AA71A0EAE06ADB83CD57A4C89
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported yet CPU!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[gulka]

LG Google Nexus 5 Snapdragon 800 MSM8974 не поддерживается

Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_S : 0AC43ADC
ID_BLOCK_I : 007B00E1
ID_BLOCK_L : E91B718D28B6A3AE99CE060FC893232B
ID_BLOCK_L : 9FF658F3E46FDF54694409C6CC233D1E
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported yet CPU!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[gulka]

Xiaomi Mi 4c Prime не поддерживается

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.09


Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 82x [MSM8996]
ID_BLOCK_S : 014EFC48
ID_BLOCK_I : 009690E1
ID_BLOCK_L : C683003E8E854B2EA73987FE52C0381F
ID_BLOCK_L : 16E69C3BFADDF525D2B56E5926905C01
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[ur3ec]

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.09


Operation : Reset Settings [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 044CE37C
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : 93FD0FBB378EB3E9A69046A1E37993B3
ID_BLOCK_L : CFAA5F4AEC33EAEAFEF60735E68AE3BA
Use CM2 Internal Loader

Error : Prepare target failed! Unsupported SecureType!
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

[alexey333]

alcatel 6055k не поддерживается

6055k info

Operation : Identify [ v1.09 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_S : 008AEAE2
ID_BLOCK_I : 009720E1
ID_BLOCK_L : 72BF9CBF701047F8623F3CC739B9077F
ID_BLOCK_L : DEAEA95337D73B13146597CA01D012D6
Use CM2 Internal Loader
Error : Prepare target failed! Unsupported yet CPU!
Send log and report.log to support! Include device info also!
Reconnect Power/Cable!

[Mumang]

Итак тест на чтение и запись Custom_Rom без TWRP)
Пациент AGM A1 Mini с добавленным русским языком собственно.
Read

Brand : AGM
ProdName : T68
ProdModel : A1 mini
Device : MSM8909QC
AndroidVer: 5.1.1
Manufact. : AGM
QLMxCPU : MSM8909

DevInfo : MSM8909__AGM__AGM__ANDR_v5.1.1__A1_mini__MSM8909QC __T68

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : misc.img
[Read Ok] : diag.bin
[Read Ok] : lsplash.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 1354 MiB

Done!
Elapsed: 00:02:45

Reconnect Power/Cable!

Write

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 00174163
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 6080FA04B33F242700759F804F1A9AB2
ID_BLOCK_L : F2810F9E9302AC39DC1B7CB5BF76606B
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D3000000 [ eMMC 8 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!

Files in Chain : 29
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : misc.img
Flashing : lsplash.img
Flashing : NON-HLOS.bin
Flashing : sec.dat
Flashing : boot.img
Flashing : system.img
Flashing : persist.img
Flashing : cache.img
Flashing : recovery.img
Flashing : userdata.img
Flashing : gpt_backup0.bin

Boot settings configured!

Flashing done!

Done!
Elapsed: 00:02:55

Reconnect Power/Cable!

Собственно и запись собранного для теста TWRP в режиме прямой записи в девайс прошла без проблем. Но там лог ни к чему.

И да приделать бы галочку перезагружать девайс после процедур или нет, с провода дёргать не дело, а так на 5 раз только успел в TWRP зайти reboot происходит в system сразу по умолчанию.


И ещё один девайс Vivo X7 MSM8952
Read flash - это девайс уже с разлоченным boot, на лоченном ни Identify ни Read добиться не удавалось, правда на версии 1.08.

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 033A0BE9
ID_BLOCK_I : 009900E1
ID_BLOCK_L : 528DB64DD85F94B24EAEC250CCF3471C
ID_BLOCK_L : 1358D221DF2312B312ABADFE494376C4
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!


Brand : vivo
ProdName : PD1602
Device : PD1602
AndroidVer: 5.1.1
Manufact. : vivo
QLMxCPU : MSM8952

DevInfo : MSM8952__vivo__vivo__ANDR_v5.1.1__PD1602__PD1602

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : oem.img
[Read Ok] : mdtp.img

Error : Failed to convert data! Erased/Damaged device???
Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Ну и собственно тут тоже не всё гладко не дочитался, запись перепакованных разделов напрямую и результат приложу на днях.

[JayDi]

Прошивку с этого vivo надо, без system.img

[Mumang]

Там Userdata.img больше 1 gb его тоже выкинуть?
Вот без system и data - https://yadi.sk/d/J1aKFjC23ASDwK
C data попробую сильнее ужать и тоже приложу.
https://yadi.sk/d/UWhjAv623ASUKc - userdata включена - сейчас идёт запись русского system direct write - результат приложу.
Итак лог записи
Write Sparse system.img -

Operation : Memory Tool Init [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 033A0BE9
ID_BLOCK_I : 009900E1
ID_BLOCK_L : 528DB64DD85F94B24EAEC250CCF3471C
ID_BLOCK_L : 1358D221DF2312B312ABADFE494376C4
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!

Set default path : C:\InfinityBox\CM2QLM\phdata\

Ready!

Operation Write Memory [ v1.09 ]

Write selected partitions [1]
[0] Write partition : SYSTEM
Write from : E:\Leo\Vivo_X7\Rus\system_new.img
Write partition Ok!
Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:17:25

Reconnect Power/Cable!

Скрин результата -

Вообщем аппарат готов и отдам его, но если сегодня завтра будет обновление есть ещё один точно такой же заберу завтра на руки.