Успешное применение, без комментариев [CM2MTK MediaTek]

[yurii-62]

Lenovo_S720

Check / Read Info

Check / Read Info

Operation : Check / Read Info [ v1.03 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x0F
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : M00SJ
[eMMC] : FLASH_CID : 1501004E4A5330304D00BB884D1F30BF
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Initial info read Ok!

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!

: Read Flash

: Read Flash

Operation : Read Flash [ v1.03 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x0F
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : M00SJ
[eMMC] : FLASH_CID : 1501004E4A5330304D00BB884D1F30BF
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Read Ok , collect info
Brand : Lenovo
ProdName : S720
ProdModel : Lenovo S720
Device : S720
AndroidVer: 4.0.4
MTKxCPU : MT6577
MTKxPRJ : ALPS.ICS2.MP.V1
Saved to : C:\InfinityBox\CM2MTK\Flash\MT6577__LENOVO__Lenovo _S720__ALPS.ICS2.MP.V1__Android_4.0.4__20121219_14 2913.ispff

Done!
Elapsed: 00:27:34 (размер фулла 3.64 ГБ)
Reconnect Power/Cable!

Считанный фулл Miracle-2 - 1.03 принял готов к прошивке.. (JayDi.. можно шить?? или пока воздержаться.)

Load File 
File_Info   : seattle_row
FileVersion : MT6577
Load File Ok

[JayDi]

Можно, конечно. Только стоит учесть, что после его записи в другую тушку - надо будет восстановать родное имя (или оба).

[yurii-62]

MT6589__LENOVO_S820
Format FileSystem [ v1.05 ]

Operation : Format FileSystem [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 204A0190594E495800A116486D608E0F
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ... 
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1000F8E606D
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Backup : Skipped by user request
FMT Mode set to : 2
Format : Cache and UserData (Full Factory Reset)

Format CACHE block
Format block Ok!
Format UDA block
Format block Ok!

Done!
Elapsed: 00:00:59
Reconnect Power/Cable!

Flash

======= Flash
Files set for flashing : 
[ MCU ] : MT6589__LENOVO__Lenovo_S820_ROW__ALPS.JB2.MP.V1__Android_4.2.1__20130603_060849.ispff

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 204A0190594E495800A116486D608E0F
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ... 
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1000F8E606D
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Brand     : Lenovo
ProdName  : S820_ROW
ProdModel : Lenovo S820_ROW
Device    : S820_ROW
AndroidVer: 4.2.1
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB2.MP.V1

Flash pre-erase enabled
Erase Flash now ...
Flash pre-erase done

Write Flash now ...
[ MCU ] : MT6589__LENOVO__Lenovo_S820_ROW__ALPS.JB2.MP.V1__Android_4.2.1__20130603_060849.ispff

Init Ok , Sending blocks ... 
Write done , 3696 blocks sent

Done!
Elapsed: 00:11:15
Reconnect Power/Cable!

[yurii-62]

Прошивка BeelineSmart3 ([MediaTek] MT6572): InfinityBox CM2MTK [ v1.17 ]

Operation : Flash [ v1.17 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D433034475829B9FC3E91A7
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G40CM
[eMMC] : FLASH_CID : 7001004D4D433034475829B9FC3E91A7
[eMMC] : FLASH_LEN : 0x00000000E6800000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : ztenj72_we_72_m536_ , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled

SecCfg Passed , 1799
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!
BMT remark not need. Will skip

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x00000000E2E20000
Flash Pre-Erase Done, time used : 00:00:08

BL : Clear old BL Data
BL : Clear old BL Data Ok
Sending Preloader ... 
Use : preloader_ztenj72_we_72_m536_kk.b
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0012

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:01:59

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:32

Update RomInfo done

Done!
Elapsed: 00:03:08
Reconnect Power/Cable!

ТА запустился, работает...

[AGrishutin]

Keneksi Q4 - USER CODE

MT6260 > Info> Read User Code

Card found: S/N 0000:0000
Chinese Miracle II [MTK module] v 1.21

Operation : Check / Read Info [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 32 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E267CD4A6B2CBE87B3D958E5CB4C60C3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00300000
SDS : 0x00000000 , 0x00000000

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!


Operation : Read UserCode [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 32 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E267CD4A6B2CBE87B3D958E5CB4C60C3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00300000
SDS : 0x00000000 , 0x00000000

Read ExtData
Sorting ExtData
Reading UserCode

Active : Yes , Code : 1111

PLock|MobTrack : Not active

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!

Без проблем вычитал код.

Read Full > 3мб.

Operation : Read Flash [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 32 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E267CD4A6B2CBE87B3D958E5CB4C60C3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00300000
SDS : 0x00000000 , 0x00000000
Reading Flash Conent now ...

Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info : 1303_Q4_PCB01_gprs_MT6260_S00.V1_00_09_M131209.bin
FileVersion : V1_00_09_M131209
Saved to : D:\InfinityBox\CM2MTK\Read_out\1303_Q4_PCB01_gprs_ MT6260_S00.V1_00_09_M131209.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

Форматирование: USER CODE ушел )

Format

Operation : Format FileSystem [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 32 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E267CD4A6B2CBE87B3D958E5CB4C60C3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00300000
SDS : 0x00000000 , 0x00000000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x002C5000-0x002FFFFF , LEN : 0x0003B000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!

После формата :
IMEI 1 стал 112233445566778
IMEI 2 стал 212233445566778

Security / IMEI > Запись родного IMEI

Operation : Repair Security [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 32 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E267CD4A6B2CBE87B3D958E5CB4C60C3
BROM Protocol Version : 05
Setting Service Mode ...
Init Ok, waiting for phone ...
Phone Initial Info :
BB : MT6260
SW : V1_00_09_M131209
HW : BIRD60M_11B_HW
IMEI[1] : 112233445566778
IMEI[2] : 213243546576878
Update IMEI[1] to : 359110050496*****
Update IMEI[2] to : 359110050496*****
Done!

Done!
Elapsed: 00:00:41
Reconnect Power/Cable!

IMEI родной на месте!

Flash > Запись родного ранее вычитанного фулла

Load File
File_Info : 1303_Q4_PCB01_gprs_MT6260_S00.V1_00_09_M131209.bin
FileVersion : V1_00_09_M131209
Load File Ok

Operation : Flash [ v1.21 ]

======= Flash
Files set for flashing :
[ MCU ] : 1303_Q4_PCB01_gprs_MT6260_S00.V1_00_09_M131209.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 32 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E267CD4A6B2CBE87B3D958E5CB4C60C3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3600 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00300000
SDS : 0x00000000 , 0x00000000

File_Info : 1303_Q4_PCB01_gprs_MT6260_S00.V1_00_09_M131209.bin
FileVersion : V1_00_09_M131209
Flash now

Erase region , wait ...
[ERROR] :
Write data , wait ...
Write : 1303_Q4_PCB01_gprs_MT6260_S00.V1_00_09_M131209.bin

Done!
Elapsed: 00:00:37
Reconnect Power/Cable!

Все ок, аппарат включился и исправно функционирует!

[Evil]

Успешно разлочил huaweiy320-u10 с забитыми попытками ввода.

Operation : SP Unlock [ v1.21 ]
Mode : Direct Unlock

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 163 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D30344728827BCAB990FB
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : G40ME
[eMMC] : FLASH_CID : 45010053454D30344728827BCAB990FB
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Lock Status : Locked!
Unlocking ...
Unlock done!

Done!
Elapsed: 00:00:27
Reconnect Power/Cable!

[Dr_Wolodya]

Lenovo S820 NVRAM Repair on erased phone:

Fix Unknown BaseBand

Operation : Fix Unknown BaseBand [ v1.32 ]
User accepted FixBB operation!

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 204A0190594E4958A2A1164833A0E6B4
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1A2B4E6A033
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Step #1
Step #1 ... Ok
Step #2
Step #2 ... Ok
Reset Done!

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

Write Security in CM2 Repair Mode

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 204A0190594E4958A2A1164833A0E6B4
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1A2B4E6A033
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Set IMEI [00] : 863437028030468
Set IMEI [01] : 863437028030476
Prepare finished. Security check required!

Wait for phone...
Phone found! [ 22 ]
Sync...
PostCheck Ok! Repair done!

Done!
Elapsed: 00:00:54
Reconnect Power/Cable!

Fix DL Mode

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 204A0190594E4958A2A1164833A0E6B4
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1A2B4E6A033
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

Write NVRAM

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 204A0190594E4958A2A1164833A0E6B4
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1A2B4E6A033
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[NVCheck] : BBID : MT6583 , NVID : MT6583
[NV] : Write Ok!

[Info] : NVRAM Repair on erased/damaged phone :
1. Fix Unknown BaseBand
2. Repair Security
3. Write NVRAM

Done!
Elapsed: 00:00:15

[yurii-62]

MT6572_Lenovo_A369i_ AndroidVer: 4.2.2
Удачная вычитка графического ключа блокировки..

Start  at : [21.10.2015 / 12:28:42]
Operation : Read PatternLock [ v1.34 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E355530304D02FFFEC2C3A091
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : M00U5
[eMMC] : FLASH_CID : 1501004E355530304D02FFFEC2C3A091
[eMMC] : FLASH_EXT : 00200000/00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ... 
FS Size : 1323 MiB
Magic Ok
Mount point  : /data

Get PatternLock ...
PatternLock Sequnce : 125896

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

MT6582_EXPLAY_ TABLET_ D8.2 3G

Удачная вычитка графического ключа блокировки..

Operation : Read PatternLock [ v1.34 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 8801034E4361726420323D816033C0E3
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : draC
[eMMC] : FLASH_CID : 8801034E4361726420323D816033C0E3
[eMMC] : FLASH_EXT : 00200000/00000000
[eMMC] : FLASH_LEN : 0x00000001CE100000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ... 
FS Size : 1023 MiB
Magic Ok
Mount point  : /data

Get PatternLock ...
PatternLock Sequnce : 7415369

Done!
Elapsed: 00:00:41
Reconnect Power/Cable!

[Dr_Wolodya]

Планшет DEX IP977 на Rockchip RK3188:

Identify

Chinese Miracle II [RKT Module] v 1.0

Connect device to PC!
Hold 'VolUp'+'VolDown' or 'VolUp', insert USB cable, press 'PowerOn'!

Found active FlashInterface , connecting ...
Detected : RK3066
Read Info Ok!

Operation : ReadInfo [ v1.0 ]

======= Flash Info :
Channel : 0x00
FlashType : ADDE94EB74
FlashSize : 0x0000000200000000
FlashCaps : 4194304/16384/31/40/2

======= Device Info :
CPU : RK31XX
Android : v4.2.2
Project : eng.chenzy.20130624.103346
Name : rk31sdk
Brand : iP977
Device : DEX
Model : iP977

Read Info Ok!
Elapsed: 00:00:05

Read IRFW Firmware

Operation : Read Flash [ v1.0 ]

Collect InitData ...
Reading now ...

Reading : PARAMS
Reading : MISC
Reading : KERNEL
Reading : BOOT
Reading : RECOVERY
Reading : BACKUP
Reading : CACHE
Reading : USERDATA
Reading : SYSTEM

Read Ok! Firmware size : 533 MiB
Saved as : RK3066__IP977__rk31sdk__eng.chenzy.20130624.103346 .irkfw
Done!

Elapsed: 00:02:14

Прошивку заливаю на поддержку через IOS Uploader.

Format/ Reset Settings

Format FS/Reset Settings accepted by User!
Operation : FormatFS / ResetSettings [ v1.0 ]

Init UserData
Init Cache
Init IntSD
Init Ok! Format prepare Done!
Wait, until device reboot

Elapsed: 00:00:00

Планшет автоматом зашёл в рекавери, отфрматировался и успешно загрузился в нормальном режиме.

[Dr_Wolodya]

Планшет BeeX Cobra SD на Rockchip RK3026:

Identify

Operation : ReadInfo [ v1.0 ]

======= Flash Info :
Channel : 0x00
FlashType : ADD7949160
FlashSize : 0x0000000105800000
FlashCaps : 2097152/8192/32/40/2

======= Device Info :
CPU : RK3026
Android : v4.4.2
Project : eng.incar.20141024.180258
Name : rk3026
Brand : rockchip
Device : rk3026
Model : rk3026

Read Info Ok!
Elapsed: 00:00:00

Read IRFW Firmware

Operation : Read Flash [ v1.0 ]

Collect InitData ...
Reading now ...

Reading : PARAMS
Reading : MISC
Reading : KERNEL
Reading : BOOT
Reading : RECOVERY
Reading : BACKUP
Reading : CACHE
Reading : USERDATA
Reading : SYSTEM

Read Ok! Firmware size : 1060 MiB
Saved as : RK3066__COBRA SD__rk3026__eng.incar.20141024.180258.irkfw
Done!

Elapsed: 00:01:58

Прошивку заливаю на поддержку через IOS Uploader.

Format/ Reset Settings

Format FS/Reset Settings accepted by User!
Operation : FormatFS / ResetSettings [ v1.0 ]

Init UserData
Init Cache
Init IntSD
Init Ok! Format prepare Done!
Wait, until device reboot

Elapsed: 00:00:00

Планшет автоматом зашёл в рекавери, отфрматировался и успешно загрузился в нормальном режиме.

[gulka]

FLY flylife Connect 73G 2

Operation : Remove Viruses [SmartAV] [ v1.35 ]

Operation : Remove Viruses [SmartAV] [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D43303447580F93B65031D3
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G40CM
[eMMC] : FLASH_CID : 7001004D4D43303447580F93B65031D3
[eMMC] : FLASH_EXT : 00200000/00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 45
Removing infected files and scripts ...

SmartAV Report : Removed 45 infected files!

Making additional operations ...
Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : PostFix Ok!

Done!

Done!
Elapsed: 00:01:30
Reconnect Power/Cable!

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D43303447580F93B65031D3
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G40CM
[eMMC] : FLASH_CID : 7001004D4D43303447580F93B65031D3
[eMMC] : FLASH_EXT : 00200000/00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 45
Removing infected files and scripts ...

SmartAV Report : Removed 45 infected files!

Making additional operations ...
Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : PostFix Ok!

Done!

Done!
Elapsed: 00:01:30
Reconnect Power/Cable!

[Dr_Wolodya]

Чистка от порно-вирусов Lenovo P780:

Chinese Miracle II  [MTK module] v 1.35

Operation : Remove Viruses [SmartAV] [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 204A0190594E4958A2A1164889B09334
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1A23493B089
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 31
Removing infected files and scripts ... 

SmartAV Report : Removed 31 infected files!

Making additional operations ... 
Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : PostFix Ok!

Done!

Done!
Elapsed: 00:05:25
Reconnect Power/Cable!

После прогрма просит сделать Full Factory Reset:

Operation : Format FileSystem [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 204A0190594E4958A2A1164889B09334
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1A23493B089
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:18
Reconnect Power/Cable!

Телефон успешно стартанул и нормально работает.

[Dr_Wolodya]

Чистка от порно-хлама Lenovo S668t:

Operation : Remove Viruses [SmartAV] [ v1.35 ]

Chinese Miracle II [MTK module] v 1.35

Operation : Remove Viruses [SmartAV] [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3758564D42015A40CE5171A9
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42015A40CE5171A9
[eMMC] : FLASH_EXT : 00400000/00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 18
Removing infected files and scripts ...

SmartAV Report : Removed 18 infected files!

Making additional operations ...
Special Op #1 : Clear Recovery Data Ok!
Special Op #2 : PostFix Ok!

Done!

Done!
Elapsed: 00:01:17
Reconnect Power/Cable!

После прогрма просит сделать Full Factory Reset:

Operation : Format FileSystem [ v1.35 ]

Operation : Format FileSystem [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3758564D42015A40CE5171A9
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42015A40CE5171A9
[eMMC] : FLASH_EXT : 00400000/00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:22
Reconnect Power/Cable!

Телефон успешно стартанул и нормально работает.

[gulka]

Micromax X1850 MTK6261

Operation : Check / Read Info [ v1.35 ]

Chinese Miracle II [MTK module] v 1.35

Start at : [29.10.2015 / 12:57:46]
Operation : Check / Read Info [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 23 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 5129BB9AEE269607C4E86A3340D1A68C
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00300000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : 0x002FE000 , 0x00002000

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!

Finish at : [29.10.2015 / 12:57:54]

Operation : Read Flash factory skat [ v1.35 ]

Start at : [29.10.2015 / 12:58:10]
Operation : Read Flash [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 23 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 5129BB9AEE269607C4E86A3340D1A68C
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00300000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : 0x002FE000 , 0x00002000
Reading Flash Conent now ...

Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info : BESTONE61M_SML_11C_PCB01_gsm_MT6261_S00.RUSSIA_X18 50_SW_V0_0_8_HW_V1_0_210415.bin
FileVersion : RUSSIA_X1850_SW_V0.0.8_HW_V1.0_210415

[ScatCFG] : MT6261 / RUSSIA_X1850_SW_V0.0.8_HW_V1.0_210415 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\BESTONE61M_SML_11C_ PCB01_gsm_MT6261_S00\

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!

Finish at : [29.10.2015 / 12:58:25]

Operation : Read Flash FULL [ v1.35 ]

Start at : [29.10.2015 / 13:01:59]
Operation : Read Flash [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 23 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 5129BB9AEE269607C4E86A3340D1A68C
BROM Protocol Version : 05
Setting...
Setting done , result code 0x0000
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00300000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : 0x002FE000 , 0x00002000
Reading Flash Conent now ...

Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info : BESTONE61M_SML_11C_PCB01_gsm_MT6261_S00.RUSSIA_X18 50_SW_V0_0_8_HW_V1_0_210415.bin
FileVersion : RUSSIA_X1850_SW_V0.0.8_HW_V1.0_210415
Saved to : C:\InfinityBox\CM2MTK\Read_out\BESTONE61M_SML_11C_ PCB01_gsm_MT6261_S00.RUSSIA_X1850_SW_V0_0_8_HW_V1_ 0_210415.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

[gulka]

Micromax X2401 MTK6260

Operation : Check / Read Info [ v1.35 ]

Operation : Check / Read Info [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 23 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : B12980E9000B144C3BD365828D8E00AC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C800 6000 1700 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64
[0] : FLASH_DIE : 00C8 0060 0017 0000
[0] : FLASH_LEN : 0x00800000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
SDS_INFO : Not exists

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!

Operation : Read Flash Factory scat[ v1.35 ]

Operation : Read Flash [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 23 ]
Sync...
Sync Ok, read regs...
Initial Register Read Failed (HW/Connection Error)
Boot Error!

Operation Failed
Elapsed: 00:00:00
Reconnect Power/Cable!


Operation : Read Flash [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 23 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : B12980E9000B144C3BD365828D8E00AC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C800 6000 1700 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64
[0] : FLASH_DIE : 00C8 0060 0017 0000
[0] : FLASH_LEN : 0x00800000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
SDS_INFO : Not exists
Reading Flash Conent now ...

Read Flash now
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info : MX277_A_HM_B24127M_RUSSIAN_PCB01_gprs_MT6260_S00.M MX_X2401_RU_SW_V06_HW_V01_050115.bin
FileVersion : MMX_X2401_RU_SW_V06_HW_V01_050115

[ScatCFG] : MT6260 / MMX_X2401_RU_SW_V06_HW_V01_050115 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\MX277_A_HM_B24127M_ RUSSIAN_PCB01_gprs_MT6260_S00\

Done!
Elapsed: 00:00:28
Reconnect Power/Cable!

Operation : Read Flash FULL[ v1.35 ]

Operation : Read Flash [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 23 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : B12980E9000B144C3BD365828D8E00AC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C800 6000 1700 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64
[0] : FLASH_DIE : 00C8 0060 0017 0000
[0] : FLASH_LEN : 0x00800000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
SDS_INFO : Not exists
Reading Flash Conent now ...

Read Flash now
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info : MX277_A_HM_B24127M_RUSSIAN_PCB01_gprs_MT6260_S00.M MX_X2401_RU_SW_V06_HW_V01_050115.bin
FileVersion : MMX_X2401_RU_SW_V06_HW_V01_050115
Saved to : C:\InfinityBox\CM2MTK\Read_out\MX277_A_HM_B24127M_ RUSSIAN_PCB01_gprs_MT6260_S00.MMX_X2401_RU_SW_V06_ HW_V01_050115.bin

Done!
Elapsed: 00:00:32
Reconnect Power/Cable!

[gulka]

ProdModel : ALCATEL ONE TOUCH 5035D

Operation : Read Flash [ v1.36 ]

Operation : Read Flash [ v1.36 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x0F
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : M00SJ
[eMMC] : FLASH_CID : 1501004E4A5330304D00631B0AF23187
[eMMC] : FLASH_EXT : 00100000/00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

MT657x Old CPU : Skip Initial Info read

[Image Ok] : preloader_jrdsh77_cu_ics2.bin
[Image Ok] : DSP_BL
[Image Ok] : MBR
[Image Ok] : EBR1
[Image Ok] : EBR2
[Image Ok] : lk.bin
[Image Ok] : boot.img
[Image Ok] : recovery.img
[Image Ok] : secro.img
[Image Ok] : logo.bin
[Image Ok] : custpack.img
[Image Ok] : system.img
[Image Ok] : cache.img
[Image Ok] : userdata.img
[Image Ok] : fat.img

Brand : TCT
ProdName : Camry
ProdModel : ALCATEL ONE TOUCH 5035D
Device : Camry_GSM
AndroidVer: 4.1.1
MTKxCPU : MT6577
MTKxPRJ : ALPS.JB.MP.V1

[ScatCFG] : MT6577 / V1.0.0 / jrdsh77_cu_ics2 / EMMC
FW Size : 862 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6577__TCT__ALCATEL ONE TOUCH 5035D__Camry_GSM__4.1.1__ALPS.JB.MP.V1\

All done!

Done!
Elapsed: 00:07:05
Reconnect Power/Cable!

Operation : Check / Read Info [ v1.36 ]

Operation : Check / Read Info [ v1.36 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x0F
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : M00SJ
[eMMC] : FLASH_CID : 1501004E4A5330304D00631B0AF23187
[eMMC] : FLASH_EXT : 00100000/00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : TCT
ProdName : Camry
ProdModel : ALCATEL ONE TOUCH 5035D
Device : Camry_GSM
AndroidVer: 4.1.1
MTKxCPU : MT6577
MTKxPRJ : ALPS.JB.MP.V1

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

Operation : Read NVRAM [ v1.36 ]

Operation : Read NVRAM [ v1.36 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x0F
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : M00SJ
[eMMC] : FLASH_CID : 1501004E4A5330304D00631B0AF23187
[eMMC] : FLASH_EXT : 00100000/00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : Can't identify BB version!
Read Ok, MT6575_eMMC.spnv saved

Done!
Elapsed: 00:00:22
Reconnect Power/Cable!

[gulka]

Alcatel Pixi 8 9005X

Operation : Read Flash [ v1.36 ]

Operation : Read Flash [ v1.36 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : FE014E50314A39344B12518B5FF1A1C9
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 00FE , OEM : 014E
[eMMC] : FLASH_INF : K49J1
[eMMC] : FLASH_CID : FE014E50314A39344B12518B5FF1A1C9
[eMMC] : FLASH_EXT : 00100000/00100000
[eMMC] : FLASH_LEN : 0x00000000E9800000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : TCL
ProdName : 9005X
ProdModel : 9005X
Device : PIXO8_3G
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.16

[Read Ok] : preloader_pixo8_3g.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / pixo8_3g / EMMC
FW Size : 1292 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6582__TCL__9005X__PI XO8_3G__4.4.2__ALPS.KK1.MP1.V2.16\

All done!

Done!
Elapsed: 00:05:47
Reconnect Power/Cable!

Operation : Read NVRAM [ v1.36 ]

Operation : Read NVRAM [ v1.36 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : FE014E50314A39344B12518B5FF1A1C9
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 00FE , OEM : 014E
[eMMC] : FLASH_INF : K49J1
[eMMC] : FLASH_CID : FE014E50314A39344B12518B5FF1A1C9
[eMMC] : FLASH_EXT : 00100000/00100000
[eMMC] : FLASH_LEN : 0x00000000E9800000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : Can't identify BB version!
Read Ok, MT6582_eMMC.spnv saved

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!

[gulka]

ZTE Blade L2 MT6582

Operation : Read Flash [ v1.37 ]

Operation : Read Flash [ v1.37 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164048601A4FF32B1ED
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048601A4FF32B1ED
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : ZTE
ProdName : P182A10
ProdModel : ZTE Blade L2
Device : P182A10
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.MP.V1.1

[Read Ok] : preloader_p182a10.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / p182a10 / EMMC
FW Size : 934 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6582__ZTE__ZTE Blade L2__P182A10__4.2.2__ALPS.JB5.MP.V1.1\

All done!

Done!
Elapsed: 00:03:56
Reconnect Power/Cable!

[gulka]

Alcatel OneTouch 4027D PIXI 3

Operation : Read Flash [ v1.37 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447453001919034205257
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 11010030303447453001919034205257
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : TCL
ProdName  : 4027D
ProdModel : 4027D
Device    : Pixi3-45
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

[Read Ok] : preloader_pixi3_45.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / pixi3_45 / EMMC
FW Size : 1411 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__TCL__4027D__Pixi3-45__4.4.2__ALPS.KK1.MP6.V1\

All done!

Done!
Elapsed: 00:06:11
Reconnect Power/Cable!

[yurii-62]

Успешно прочитан графический ключ Lenovo S930