Infinity-Box Chinese Miracle 2 : Новости и обновления ПО для MTK/MediaTek

[JayDi]

v1.01b
.MediaTek MT6261 CPU supported
Supported Operations :
Read Info / Check
Write Flash
Read Flash
Format FS
Repair Security

.MT625A,MT6260 support improved
Support latest FlashLoaders
Improved Format FS procedure

.Other
FlashID database updated
FlashLoaders updated
Some bugfixes

Link : CM2MTK_v101b

Очень было бы клево с МТ625A хотяб один-два теста

[DB2020_Logs]

Чтение фулл-флеша всего за 14 сек.

Operation : Read Flash [ v1.01b ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EFC1B4618B995BC946E9710B8E80CCBC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , 
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS : 0x003FE000 , 0x00002000
Reading Flash Conent now ... 

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F1
Saved to : C:\Documents and Settings\Administrator\Desktop\mtk\Read_out\FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!

Форматирование FS

Operation : Format FileSystem [ v1.01b ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EFC1B4618B995BC946E9710B8E80CCBC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , 
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS : 0x003FE000 , 0x00002000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x003B7000-0x003FDFFF , LEN : 0x00047000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

Запись прошивки

Load File 
File_Info   : FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F1
Load File Ok

Operation : Flash [ v1.01b ]

======= Flash
Files set for flashing : 
[ MCU ] : FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EFC1B4618B995BC946E9710B8E80CCBC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , 
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS : 0x003FE000 , 0x00002000

File_Info   : FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F1
Flash now

Erase region , wait ...
Write data , wait ...
Write : FLYCOM61D_11C_M872_PCB01_gprs_MT6261_S01.MAUI_11C_W13_52_MP_V2_F1.bin

Done!
Elapsed: 00:00:42
Reconnect Power/Cable!

Восстановление IMEI

Operation : Repair Security [ v1.01b ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
[ERROR] : DONE
BB_CPU_SN : UNKNOW [ READ ERROR ]
BROM Protocol Version : 05
Setting Service Mode ...
Init Ok, waiting for phone ...
Phone Initial Info : 
BB : MT6261
SW : MAUI.11C.W13.52.MP.V2.F1
HW : Spice M-5408
IMEI[1] : 000000000000000
IMEI[2] : 000000000000000
Update IMEI[1] to : 911347506087165
Update IMEI[2] to : 911347506087173
Done!

Done!
Elapsed: 00:00:32
Reconnect Power/Cable!

Сброс кода телефона

Operation : Reset UserCode [ v1.01b ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : EFC1B4618B995BC946E9710B8E80CCBC
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , 
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS : 0x003FE000 , 0x00002000

Backup exists , skip
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!

[JayDi]

ТЕстовая версия с поддержкой нандов будет доступна сегодня/завтра.
Хочу сделать универсальным, а не выискивать новые флэши и добавлять каждый раз их.

[DB2020_Logs]

10-10-2014: Chinese Miracle-2 (Release) MTK/MediaTek v1.02 released
MT6571 NAND/eMMC support, Generic 6571/6572 NAND support

MediaTek SP Platform:
Activated NAND support on following CPU:
.MT6571
.MT6572
Supported features:
.Flash Read
.Format FS: Cache, UDA, UDA+CACHE
.Read Info/Check

Activated eMMC support on following CPU:
.MT6571

Other:
.FlashInit: support some models with not active Preloader or erased Flash
.HSUSB: Init fast flashing / flash reading if phone have not active Preloader or Flash erased
.Format FS procedure improved
.Compile Info extraction improved
.FullFlash Dump Integrity check during Read/Write
.FlashID database updated
.SP FlashLoaders updated

MediaTek FP Platform:
MT6260, MT6261, MT625A: Format FS procedure revised
MT6260, MT6261: Empty (Blank) FlashIC support

[JayDi]

1.03 готова, активировал паттерн, прикрутил тестовую поддержку 6592 и по мелочи, полный список :

MediaTek SP Platform 
 Activated eMMC support on following CPU: 
 MT6592
 Operations:
 Read Info/Check
 Read Flash
 Read PatternLock

 New feature supported: PatternLock Read
 ADB Debug Enable IS NOT required
 Root IS NOT required, No system modifications, No Warranty void 
 Supported phones (CPU): 
 MT6571 eMMC
 MT6572 eMMC
 MT6575 eMMC
 MT6577 eMMC
 MT6582 eMMC
 MT6583 eMMC
 MT6589 eMMC
 MT6592 eMMC
 MT8312 eMMC
 Supported Android Versions: All 4.x.x (up to latest) 

 Other: 
 MT6583 support improved
 MT6572 NAND support improved
 MT6571 NAND support improved
 MT6575 eMMC support broken in latest FlashLoaders, fixed
 Initial boot revised (MT659x support)
 FlashInit improved 
 Format FS procedure improved
 Compile Info extraction improved 
 FlashID database updated 

 MediaTek FP Platform 
 MT6260, MT6261, MT625A: improved latest FlashLoaders support

server1 download area

[yurii-62]

Chinese Miracle-2 (Release) MTK/MediaTek v1.06 released

MT65xx Repair security support and more

 MediaTek SP Platform 
 .Cross CPU/Flash file checking ( not allow cross-flash different firmware )
 .Repair Security options activated
 Tested and supported CPU: 
 MT6571,MT6572,MT6575,MT6577
 MT6582,MT6583,MT6589,MT6592
 MT8312 series
 Support up to 4 IMEI repair

 Other: 
 .Format FS procedure revised: backup/checking
 .FlashInit improved 
 .Compile Info extraction improved 
 .FlashID database updated 
 .DebugLog reading enabled - for test/repair purposes

 MediaTek FP Platform 
 .Repair Security operation improved
 .Support for 4th IMEI is activated

 Other: 
 Drivers updated
 Some bugfixes and improvements

 First test-report: Repair Security MT65xx : 6571/6592 test

http://server1.infinity-box.com/down...tware/updates/

[yurii-62]

Chinese Miracle-2 (Release) MTK/MediaTek v1.07 released

Chinese Miracle-2 (Release) MTK/MediaTek v1.07 released
MediaTek SP Platform
.Universal NAND support for MT6571/MT6572/MT6575/MT6577 released *
.MT6573 support released (Read Info/Read Flash/Format FS)
.MT6575/MT6577 NAND support fixed
.MT6575/MT6577 eMMC support improved
.Repair Security improved

Other:
.Flash Pre-Erase revised
.Format FS procedure revised for eMMC phones ( simplified and removed extended settings ) ****
.Added support for "Format FS" on non-aligned PMT phones ( Some MT6575 eMMC phones, like - Alcatel, Lenovo and some MT6573 NAND )
.FlashInit improved
.Compile Info extraction improved
.MT6575/MT6577/MT6573 NAND Compile Info extraction enabled
.FlashID database updated

MediaTek FP Platform
.Reset user code operation improved
.FlashId database updated

Other:
Some bugfixes and improvements

Notes :
* It is mandatory now make "Read Info" before other operations for NAND phones
**** If need full rest ( "Wipe"/"Clean" ) - Set to "0" always. If need preserve some vendor apps - use software defined or own set.
If phone "hang" on logo - do format again with "0" settings.

[serge63]

InfinityBox_install_CM2MTK_v1.08

=== v1.08 ===
MTK SP (Android) eMMC:
- Reset Privacy Lock (AntiTheft Lock) released - World First
Allow reset "Privacy Protection Password" without FullFlash Erase, Destroying phone calibrations etc.
Mostly used for MT6571/MT6572 phones
- Fix DL option released - World First
Allow fix "DL Tool Fail" and rest start-up errors after "Flash Write", "Format FS", "Reset PL"
No need factory firmwares etc.
That option allow now support original HTC, Acer, and some other brands with MTK65xx CPU
- Format FS improved
- FlashId database updated

MTK SP (Android) NAND:
- Improved "Read Info" operation
- Improved "Read Flash" and "Format FS" operations
- FlashId database updated

Other changes:
FlashInit improved
Repair Security for MTK SP phones improved
Other fixes and changes

[JayDi]

Прикрутил чтение прошивки в заводском формате ( скаттер )
http://www.4shared.com/get/3d1HmIkuba/CM2MTK_109.html

Читает только то, что должно быть для прошивки. Все максимально приближено к заводскому варианту. Сделанную прошивку можно смело лить в другие тушки.

Alcatel , HTC и прочие подобные - тоже поддерживаются. Если чет не прочтется - программа скажет что и как.
MT6571/MT6572/MT6582/MT6589/MT6592 - eMMC only.

Поддержка записи заводской в процессе, почти заработала как надо.

С нандами - пока полная неопределенность. Думаю.
Разлок - получилось разлочить даже Huawei Y330, что прислал DrManila. В ближайшее время допилю и активирую. Жаль, что тушек лоченных мало. Чем больше найду - тем больше будет поддерживаться. Если у кого есть и может продать - будет замечательно.
Почти готов свой адб с преферансом и куртизанками. Репайр имеев и прочая фигня иже с ним.

[yurii-62]

Chinese Miracle-2 (Release) MTK/MediaTek v1.09 released

MediaTek SP Platform: SCAT-Standard reading for MT6571, 6572, 6582, 6583, 6592 and more

New feature supported: Read Factory Firmware (Scatter - format)
ADB Debug Enable IS NOT required
Root IS NOT required !
Supported phones (CPU):
MT6571 eMMC
MT6572 eMMC
MT6582 eMMC
MT6583 eMMC
MT6589 eMMC
MT6592 eMMC
MT83xx eMMC (Tablet)
Supported Android Versions: All (up to latest 4.4.x)
Support Different Chinese brands
Support ORIGINAL: Alcatel, HTC, ZTE, Huawei

Other:
Privacy Lock reset improved (eMMC)
Format FS procedure improved
Compile Info extraction improved
FlashID database updated
NAND support improved

[serge63]

CM2MTK_v1.10
=== v1.10 ===
More Models and Features
MediaTek SP Platform:
MTK6572/MTK6582 Secure Phones support
- Identify/Read Info
- Read/Write Flash
- Format FS
- Read PatternLock (No USB Debug, No Root, No Modify System and harm User-Level security)
Mostly Secure phones - Huawei Android phones (Huawei Y330, Huawei G610 etc) and other brands

Read Factory Firmware (Scatter - format) improved
- Universal way for most Chinese Brands/Models is work now
- MT83xx (Tablet specific) improvements
- Improved Alcatel, HTC, ZTE, Huawei and other brands support (Model/Brand specific-types)

Other:
Some bugfixes from previous update (SP Flash, SP FW Read)
Compile Info extraction improved
Repair Security improved
FlashID database updated
NAND support improved

[Vалерик]

сброс делали сами через рекавери, потом вроде сами прошивали флештулом принесли невключайку, восстановил через ТП, но OTU на 100% пишет ошибка сети. Дампа нету.... чужой дамп не могу найти.

[fedja]

Infinity-Box Chinese Miracle-2 MTK/MediaTek v1.11 released

MediaTek SP Platform
New feature supported: NVRAM Read/Write
- Read NVRAM data: MT6571-MT8392 (NAND/eMMC)
- Write NVRAM data: MT6571-MT6589, MT8312-MT8389 (eMMC only)

"Privacy Lock" Reset improved
- MT6571 NAND supported
- MT6572 NAND supported (under test)

NAND operations improved
- Structure detect now 5-6 times faster for "slow" phones (Mostly MT6571)
- Read operations improved for MT6573/MT6577

Factory Firmware reading engine updated
- Support more different types (mostly - brand-specific)
- Some bug fixes ad improvements

FlashLoaders updated
FlashID Database updated
Secure Mode support improved

MediaTek SP Platform
- Some bugfixes on flash pre-erase for MT6261

Other:
Some BugFixes and improvements at all

[serge63]

=== v1.11 ===
MediaTek SP Platform
New feature supported: NVRAM Read/Write
- Read NVRAM data: MT6571-MT8392 (NAND/eMMC)
- Write NVRAM data: MT6571-MT6589, MT8312-MT8389 (eMMC only)

"Privacy Lock" Reset improved
- MT6571 NAND supported
- MT6572 NAND supported (under test)

NAND operations improved
- Structure detect now 5-6 times faster for "slow" phones (Mostly MT6571)
- Read operations improved for MT6573/MT6577

Factory Firmware reading engine updated
- Support more different types (mostly - brand-specific)
- Some bug fixes ad improvements

FlashLoaders updated
FlashID Database updated
Secure Mode support improved

MediaTek SP Platform
- Some bugfixes on flash pre-erase for MT6261

Other:
Some BugFixes and improvements at all

[Devastator]

Выпущено обновление Chinese Miracle-2 MTK/MediaTek v1.12
MediaTek SP Platform
- NAND: Чтение Pattern Lock для MT6571, MT6572
Не нужен Root, Не нужно отладку по USB, не нужно изменение системных файлов, без потери гарантии
- Улучшен сброс Privacy Lock: исправлен NAND, поддержка MT6582
- Улучшено чтение Factory Firmware
- Операции NVRAM улучшены:
Поддержка ifnv и любого бинарного бэкапа
Улучшена поддрежка защищенных телефонов
- Пакет FlashUpdate обновлен до крайней версии

Другие:
- Инициализация NAND/eMMC улучшена
- Format FS пересмотрен
- База FlashID обновлена

[fedja]

Chinese Miracle-2 MTK/MediaTek v1.14 released
MTK Nokia 215 Support

- Activated Nokia 215 support
Supported Revision: RM-1110, RM-1111, RM-1112
Supported Operations: Read Info, Format FS

Other:
Flash ID database updated
Factory FW read improved
FlashUpdate packaged updated

Note:
Nokia MTK phones require Nokia Serial driver (download it from Support Area)

[fedja]

MediaTek SP Platform   
 New feature supported :  SP Unlock 
 Supported models : 
 Megafon Login + [MT6582] : Direct Unlock 
 Megafon Login 2 [MT6572] : Read Unlock Codes
 Huawei Y330-U01 [MT6572] : Read Unlock Codes
 No ADB , Root and e.t.c required. More models will follow.
 
 Factory FW read improved ( auto detect unknown types in most cases now )
 Factory FW ( Scatter-Defined ) Flashing improved 
 PatternLock read improved ( wrong pattern in some cases was shown )
 Repair Security Improved
 
Other
 FlashID database updated 
 Some bugfixes and improvements

[fedja]

=== v1.16 ===
MT8127 support and more features

MediaTek SP Platform
- MT8127 Full Support ( World First! )
1. Identify / Read full Info
2. Read Dump / Write Dump
3. Read Factory Firmware w/o Root/Debug/ADB
4. Flash Factory Firmware
5. Format FS (UDA/CACHE)
6. Read Pattern Lock w/o Root/Debug/ADB
7. Reset Privacy Lock
8. Fix DL

- Factory FW Reading improved
1. MT8127 supported
2. MT6592 support improved
CPU supported now for Factory FW reading: MT6571, MT6572, MT6582, MT6589, MT6592, MT8127
NO Root/ADB/Debug required for read Firmware

- MTK Flash Engine rewritten:
1. MT8127 Support, MT6572 and MT6582 support improved
2. Flash Pre-erase revised
3. Force Repartition option enabled
4. Flashing speed improved
5. AfterFlash Verify revised
6. PL SW/HW check improved
7. Support MT6571 ScatterV2
CPU supported now for Factory FW flashing: MT6571, MT6572, MT6582, MT8127

- SP Unlock operations improved
HTC 210 - Read Codes/Direct Unlock
Megafon Login 3 - Read Codes/Direct Unlock
Megafon Optima - Read Codes/Direct Unlock
Huawei G610 - Read Codes
Alcatel 4018/4032/4035/6012 - Read Codes
- MTK65xx Generic SP Code Reading activated (71|72|82|89|92 eMMC)
Allow Read SP codes (All 7 levels) from MTK SP Phones. Wide range of different models supported.
- MTK65xx Generic SP Direct Unlock activated (71|72|82|89|92 eMMC)
Allow Direct Unlock MTK SP Phones. Wide range of different models supported.
Unlock via Code Read or Direct Unlock DO NOT require Root/Debug/ADB

- Other
FlashUpdate Package updated (v1504/2015)
"FIX DL" activated for MT6582
Flash Init activated for MT8127 (Erased Preloader support)
Pattern Lock reading improved
1. NAND support improved - now supported most MT6571/MT6572 NAND
2. MT8127 PatternLock Reading activated
"Read Full Info" option activated for Flash (Dump) reading
Fixed Info extraction delay after Dump reading
Fixed CompileInfo extraction
"Secure Boot" option removed from Model List. For Secured Huawei MTK use correct Model Selection!

[fedja]

=== v1.17 ===
Alcatel, HTC and new extra features!

MediaTek SP Platform

- MTK Flash Engine:
1. Flashing with "Flash Erase" and "Repartition" work now like "Download Only" mode
2. Some other improvements
CPU supported now for Factory FW flashing: MT6571, MT6572, MT6582, MT8127, eMMC only

- SP Unlock operations improved
HTC 310 (Read Codes)
HTC 616 (Read Codes)
HTC 620G (Read Codes)
Alcatel 5038 (Direct Unlock)
Alcatel P310 (Direct Unlock)
MT6589 "SP Code Read" and "Direct unlock" revised
MT6571/MT6572 NAND supported for "Read Codes"
ADB/Root is not required

- Factory FW reading improved
HTC and Alcatel specific improvements

- Service operations improved:
HTC 310 support (SP Unlock / Read/Write Dump / Format FS / Read PatternLock) - HTC 310 model should be selected !
New Feature: Alcatel ProInfo Tool: Read ProInfo, Write ProInfo, Edit ProInfo
* Support for ProInfo write: Binary and Infinity format files
New Feature: Flash Erase - for expert use only !
* Support MT6571, MT6572, MT6582, MT6589, MT8127, only eMMC supported
New Feature: Fix Unknown BaseBand - for expert use only !
* Support MT6571, MT6572, MT6582, MT6589, NAND/eMMC supported
New Feature: Init Preloader - for expert use only !
* Support MT6571, MT6572, MT6582, MT8127, MT6589, only eMMC supported

MediaTek FP Platform

- MTK 652A/MT6260/MT6261 Read User Code activated (Reset option still exist)
Read one and correct user code and it state (active or not)
- MTK 652A/MT6260/MT6261 Read "Privacy Lock" and "Mobile Tracker" codes activated
Read one and correct PL or MobileTrack code (or both, if set)

MediaTek All

- Other
FlashUpdate Package updated to latest (v1512/2015)
FullFlash Read/Write revised for MT6572/MT6589
MT6589 Support revised, FlashInit activated
Secure Boot phones (MT6582,nMT6589) support revised
Improved CompileInfo extraction
Security Repair improved
Bugfixes and improvements

[fedja]

=== CM2MTK v1.18 ===
MT6575/MT6577/MT6589 Factory FW and more

MediaTek SP Platform

- MTK Flash Engine:
- Flash Engine rewritten
- MT6575/6577 Factory Firmware Flashing enabled
- MT6583/6589 Factory Firmware flashing enabled
- MT6582 Factory Firmware flashing improved
- MT6575/6577 Erased phones support activated
And other important bugfixes for all supported platforms
CPU supported now for Factory FW flashing: MT6571, MT6572, MT6575, MT6577, MT6582, MT6589, MT8127, eMMC only

- Factory FW reading improved
- MT6575 supported (eMMC)
- MT6577 supported (eMMC)
Allow read complete firmware with all mandatory parts as factory one!
Some improvements for specific models support on different CPUs
CPU supported now for Factory FW Reading: MT6571, MT6572, MT6575, MT6577, MT6582, MT6589, MT8127, MT6592, MT83xx eMMC only

- SP Unlock operations improved
- Read Codes now read both SIM codes for DualSim phones
- Direct Unlock improved

- Service operations improved
- "Fix Unknown BB" improved (some NAND problems fixed)
- Pattern Lock reading improved (some NAND fixes)
- Flash Init completely revised
.MT6575/MT6577 supported
.MT6589 support improved
- "Init Preloader" improved, MT6575/MT6577 support activated
- Flash Init completely rewritten for "Init Preloader", Factory FW flashing, Flash (Dump) writing
- Identify now possible with "Read All Info" for MT6575/MT6577 eMMC phones
- Alcatel "ProInfo" operations improved

MediaTek FP Platform

- MTK 652A/MT6260/MT6261 Read User Code improved

MediaTek All

- Other
FlashID Database updated
FullFlash Read/Write revised for MT6575/MT6577
Improved CompileInfo extraction
Bugfixes and improvements