HTC Incredible S восстановление загрузочной области.

[iSKA SERViCE]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [HTC Incredible S V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (M4G2DE, 0x000086800000 Bytes = 2.10 GB)

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x00000008D200

И все.Ничего не происходит. Приносили мне висел на заставке HTC

При заливке фулл

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [HTC Incredible S V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 1 MHz
Settings Code: 0x240106000000050002000000000FF000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (M4G2DE, 0x000086800000 Bytes = 2.10 GB)

Writting FLASH1 memory from 0x000000000000 to 0x0000867FFFFF
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...

[Jet]

Менять память 100%

[Yankee]

Сообщение от Jet

Менять память 100%

Полностью согласен.
Когда у Desire S/ Incredible S/ Rhyme вижу характерное "Terminating at 0x00000008D200" и после тел отваливается от компа с "устройство USB не опознано" - это фатально, eMMC в топку.