6120C надпись "Nokia" и перезагруз

[Fluderator]

чек

Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B21
CMT_PUBLIC_ID:		1730001978B901584A11D929C0CF1AE792AD304A
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	4B9B7510
CMT_SECURE_ROM_CRC:	3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000221, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0FE1BA92D924A658E4800780FA6F4868100AC947
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...


РПЛ
Skipping RPL decryption...
Parsing decrypted RPL...
Processing FBUS Part...
Processing FLASHBUS Part...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B21
CMT_PUBLIC_ID:		1730001978B901584A11D929C0CF1AE792AD304A
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	4B9B7510
CMT_SECURE_ROM_CRC:	3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000221, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0FE1BA92D924A658E4800780FA6F4868100AC947
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
CMT HWC Erased
CMT HWC Written
CMT CCC Erased
CMT CCC Written
Restarting MCU...
Write RPL Finished!


PM
[1,0] Written, Length: 114 bytes, Status: Not accepted, Code: 19
[1,1] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,2] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,4] Written, Length: 110 bytes, Status: Not accepted, Code: 19
[1,5] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,6] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,8] Written, Length: 110 bytes, Status: Not accepted, Code: 19
[1,13] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,15] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,16] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,18] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,20] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,22] Written, Length: 16 bytes, Status: Not accepted, Code: 19
[1,23] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,24] Written, Length: 84 bytes, Status: Not accepted, Code: 19
[1,25] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,26] Written, Length: 110 bytes, Status: Not accepted, Code: 19
[1,27] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,28] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,29] Written, Length: 10 bytes, Status: Not accepted, Code: 19
[1,31] Written, Length: 98 bytes, Status: Not accepted, Code: 19
[1,33] Written, Length: 36 bytes, Status: Not accepted, Code: 19
[1,34] Written, Length: 80 bytes, Status: Not accepted, Code: 19
[1,40] Written, Length: 16 bytes, Status: Not accepted, Code: 19
[1,41] Written, Length: 182 bytes, Status: Not accepted, Code: 19
[1,42] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[1,43] Written, Length: 36 bytes, Status: Not accepted, Code: 19
[1,44] Written, Length: 182 bytes, Status: Not accepted, Code: 19
[1,46] Written, Length: 64 bytes, Status: Not accepted, Code: 19
[2,0] Written, Length: 440 bytes, Status: OK
[4,1] Written, Length: 1020 bytes, Status: OK
[4,3] Written, Length: 10 bytes, Status: OK
[4,4] Written, Length: 8 bytes, Status: OK
[4,5] Written, Length: 8 bytes, Status: OK
[4,9] Written, Length: 5 bytes, Status: OK
[4,28] Written, Length: 2 bytes, Status: OK
[8,0] Written, Length: 12 bytes, Status: OK
[8,1] Written, Length: 12 bytes, Status: OK
[8,2] Written, Length: 128 bytes, Status: OK
[8,3] Written, Length: 128 bytes, Status: OK
[8,6] Written, Length: 4 bytes, Status: OK
[8,7] Written, Length: 8 bytes, Status: OK
[8,8] Written, Length: 8 bytes, Status: OK
[8,9] Written, Length: 16 bytes, Status: OK
[11,0] Written, Length: 4 bytes, Status: OK
[11,1] Written, Length: 4 bytes, Status: OK
[11,2] Written, Length: 4 bytes, Status: OK
[11,3] Written, Length: 4 bytes, Status: OK
[11,4] Written, Length: 1 bytes, Status: OK
[11,5] Written, Length: 6 bytes, Status: OK
[11,6] Written, Length: 1 bytes, Status: OK
[11,7] Written, Length: 2 bytes, Status: OK
[11,8] Written, Length: 2 bytes, Status: OK
[11,9] Written, Length: 2 bytes, Status: OK
[11,10] Written, Length: 2 bytes, Status: OK
[11,11] Written, Length: 2 bytes, Status: OK
[11,12] Written, Length: 1 bytes, Status: OK
[11,13] Written, Length: 1 bytes, Status: OK
[11,14] Written, Length: 1 bytes, Status: OK
[11,15] Written, Length: 1 bytes, Status: OK
[11,16] Written, Length: 1 bytes, Status: OK
[11,17] Written, Length: 1 bytes, Status: OK
[11,18] Written, Length: 1 bytes, Status: OK
[11,19] Written, Length: 2 bytes, Status: OK
[11,20] Written, Length: 2 bytes, Status: OK
[11,21] Written, Length: 1 bytes, Status: OK
[11,22] Written, Length: 1 bytes, Status: OK
[11,23] Written, Length: 4 bytes, Status: OK
[11,24] Written, Length: 4 bytes, Status: OK
[11,25] Written, Length: 2 bytes, Status: OK
[11,26] Written, Length: 2 bytes, Status: OK
[11,27] Written, Length: 2 bytes, Status: OK
[11,28] Written, Length: 2 bytes, Status: OK
[11,29] Written, Length: 1 bytes, Status: OK
[11,30] Written, Length: 1 bytes, Status: OK
[11,31] Written, Length: 1 bytes, Status: OK
[11,32] Written, Length: 1 bytes, Status: OK
[11,33] Written, Length: 1 bytes, Status: OK
[11,34] Written, Length: 1 bytes, Status: OK
[11,35] Written, Length: 1 bytes, Status: OK
[11,36] Written, Length: 1 bytes, Status: OK
[11,37] Written, Length: 1 bytes, Status: OK
[11,38] Written, Length: 2 bytes, Status: OK
[11,39] Written, Length: 2 bytes, Status: OK
[11,40] Written, Length: 2 bytes, Status: OK
[11,41] Written, Length: 2 bytes, Status: OK
[11,42] Written, Length: 2 bytes, Status: OK
[11,43] Written, Length: 4 bytes, Status: OK
[11,44] Written, Length: 4 bytes, Status: OK
[11,45] Written, Length: 4 bytes, Status: OK
[11,46] Written, Length: 1 bytes, Status: OK
[11,47] Written, Length: 16 bytes, Status: OK
[11,48] Written, Length: 2 bytes, Status: OK
[11,49] Written, Length: 2 bytes, Status: OK
[11,50] Written, Length: 20 bytes, Status: OK
[11,51] Written, Length: 10 bytes, Status: OK
[11,52] Written, Length: 2 bytes, Status: OK
[11,53] Written, Length: 20 bytes, Status: OK
[11,54] Written, Length: 10 bytes, Status: OK
[11,55] Written, Length: 1 bytes, Status: OK
[11,56] Written, Length: 1 bytes, Status: OK
[11,57] Written, Length: 1 bytes, Status: OK
[11,58] Written, Length: 1 bytes, Status: OK
[11,59] Written, Length: 1 bytes, Status: OK
[11,60] Written, Length: 1 bytes, Status: OK
[11,61] Written, Length: 1 bytes, Status: OK
[11,62] Written, Length: 1 bytes, Status: OK
[11,63] Written, Length: 1 bytes, Status: OK
[11,64] Written, Length: 1 bytes, Status: OK
[11,65] Written, Length: 1 bytes, Status: OK
[11,66] Written, Length: 32 bytes, Status: OK
[11,67] Written, Length: 32 bytes, Status: OK
[11,68] Written, Length: 2 bytes, Status: OK
[11,69] Written, Length: 2 bytes, Status: OK
[11,70] Written, Length: 2 bytes, Status: OK
[11,71] Written, Length: 2 bytes, Status: OK
[11,72] Written, Length: 2 bytes, Status: OK
[11,73] Written, Length: 2 bytes, Status: OK
[11,74] Written, Length: 2 bytes, Status: OK
[11,75] Written, Length: 2 bytes, Status: OK
[11,76] Written, Length: 2 bytes, Status: OK
[11,77] Written, Length: 2 bytes, Status: OK
[11,78] Written, Length: 2 bytes, Status: OK
[11,79] Written, Length: 2 bytes, Status: OK
[11,80] Written, Length: 2 bytes, Status: OK
[11,81] Written, Length: 2 bytes, Status: OK
[11,82] Written, Length: 2 bytes, Status: OK
[11,83] Written, Length: 2 bytes, Status: OK
[11,84] Written, Length: 2 bytes, Status: OK
[11,85] Written, Length: 2 bytes, Status: OK
[11,86] Written, Length: 2 bytes, Status: OK
[11,87] Written, Length: 2 bytes, Status: OK
[11,88] Written, Length: 2 bytes, Status: OK
[11,89] Written, Length: 2 bytes, Status: OK
[11,90] Written, Length: 2 bytes, Status: OK
[11,91] Written, Length: 2 bytes, Status: OK
[11,92] Written, Length: 2 bytes, Status: OK
[11,93] Written, Length: 2 bytes, Status: OK
[11,94] Written, Length: 2 bytes, Status: OK
[11,95] Written, Length: 2 bytes, Status: OK
[11,96] Written, Length: 2 bytes, Status: OK
[11,97] Written, Length: 2 bytes, Status: OK
[11,98] Written, Length: 2 bytes, Status: OK
[11,99] Written, Length: 2 bytes, Status: OK
[11,100] Written, Length: 2 bytes, Status: OK
[11,101] Written, Length: 2 bytes, Status: OK
[11,102] Written, Length: 2 bytes, Status: OK
[11,103] Written, Length: 2 bytes, Status: OK
[11,104] Written, Length: 2 bytes, Status: OK
[11,105] Written, Length: 2 bytes, Status: OK
[11,106] Written, Length: 2 bytes, Status: OK
[11,107] Written, Length: 2 bytes, Status: OK
[11,108] Written, Length: 2 bytes, Status: OK
[11,109] Written, Length: 2 bytes, Status: OK
[11,110] Written, Length: 2 bytes, Status: OK
[11,111] Written, Length: 2 bytes, Status: OK
[11,112] Written, Length: 2 bytes, Status: OK
[11,113] Written, Length: 2 bytes, Status: OK
[11,114] Written, Length: 2 bytes, Status: OK
[11,115] Written, Length: 2 bytes, Status: OK
[11,116] Written, Length: 4 bytes, Status: OK
[11,117] Written, Length: 4 bytes, Status: OK
[11,118] Written, Length: 1 bytes, Status: OK
[11,119] Written, Length: 4 bytes, Status: OK
[11,120] Written, Length: 4 bytes, Status: OK
[11,121] Written, Length: 4 bytes, Status: OK
[11,122] Written, Length: 4 bytes, Status: OK
[11,123] Written, Length: 16 bytes, Status: OK
[11,124] Written, Length: 4 bytes, Status: OK
[11,125] Written, Length: 2 bytes, Status: OK
[11,126] Written, Length: 2 bytes, Status: OK
[11,127] Written, Length: 1437 bytes, Status: OK
[12,0] Written, Length: 102 bytes, Status: OK
[26,0] Written, Length: 16 bytes, Status: OK
[26,1] Written, Length: 68 bytes, Status: OK
[31,4] Written, Length: 20 bytes, Status: OK
[44,0] Written, Length: 1 bytes, Status: OK
[50,0] Written, Length: 2 bytes, Status: OK
[54,0] Written, Length: 2 bytes, Status: OK
[54,2] Written, Length: 24 bytes, Status: OK
[88,0] Written, Length: 36 bytes, Status: OK
[96,0] Written, Length: 24 bytes, Status: OK
[107,0] Written, Length: 21 bytes, Status: OK
[107,1] Written, Length: 79 bytes, Status: OK
[107,2] Written, Length: 79 bytes, Status: OK
[107,3] Written, Length: 70 bytes, Status: OK
[107,25] Written, Length: 132 bytes, Status: OK
[117,0] Written, Length: 4 bytes, Status: OK
[117,1] Written, Length: 3 bytes, Status: OK
[117,2] Written, Length: 6 bytes, Status: OK
[117,3] Written, Length: 1 bytes, Status: OK
[117,5] Written, Length: 10 bytes, Status: OK
[117,6] Written, Length: 8 bytes, Status: OK
[117,8] Written, Length: 42 bytes, Status: OK
[117,13] Written, Length: 3 bytes, Status: OK
[117,14] Written, Length: 3 bytes, Status: OK
[117,19] Written, Length: 40 bytes, Status: OK
[120,0] Written, Length: 88 bytes, Status: OK
[120,1] Written, Length: 80 bytes, Status: OK
[120,2] Written, Length: 20 bytes, Status: OK
[120,3] Written, Length: 112 bytes, Status: OK
[193,2] Written, Length: 8 bytes, Status: OK
[193,3] Written, Length: 32 bytes, Status: OK
[193,4] Written, Length: 32 bytes, Status: OK
[193,9] Written, Length: 64 bytes, Status: OK
[208,1] Written, Length: 4 bytes, Status: OK
[217,0] Written, Length: 32 bytes, Status: OK
[309,0] Written, Length: 4 bytes, Status: Not accepted, Code: 19
[309,1] Written, Length: 2 bytes, Status: Not accepted, Code: 19
[309,2] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,4] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,5] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,7] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,8] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[309,17] Written, Length: 12 bytes, Status: Not accepted, Code: 19
[322,0] Written, Length: 1 bytes, Status: OK
[354,0] Written, Length: 13 bytes, Status: OK
[356,0] Written, Length: 2 bytes, Status: OK
Write PM Finished, Record written OK: 181, Record written NOT OK: 37

Серты
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B21
CMT_PUBLIC_ID:		1730001978B901584A11D929C0CF1AE792AD304A
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:	4B9B7510
CMT_SECURE_ROM_CRC:	3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000221, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0FE1BA92D924A658E4800780FA6F4868100AC947
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT PARTNERC Not Found
CMT VARIANT Not Found
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished

Селв
Selftests to proceed: 31
Passed		ST_TAHVOINT_TEST
Passed		ST_UEM_CBUS_IF_TEST
Failed		ST_EAR_DATA_LOOP_TEST
Passed		ST_SIM_CLK_LOOP_TEST
Passed		ST_SIM_IO_CTRL_LOOP_TEST
Passed		ST_SECURITY_TEST
Passed		ST_PWR_KEY_TEST
Passed		ST_CURRENT_CONS_TEST
Passed		ST_BACKUP_BATT_TEST
Passed		ST_SLEEPCLK_FREQ_TEST
Passed		ST_HOOKINT_TEST
Passed		ST_BTEMP_TEST
Passed		ST_EXT_DEVICE_TEST
Passed		ST_CDSP_RF_BB_IF_TEST
Passed		ST_CDSP_RF_SUPPLY_TEST
Passed		ST_CDSP_TX_IQ_TEST
Passed		ST_CDSP_TXC_DATA_TEST
Passed		ST_CDSP_PWR_DETECTOR_BIAS_TEST
Passed		ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Failed		ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed		ST_CDSP_WCDMA_TX_POWER_TEST
Passed		ST_CDSP_RX_IQ_LOOP_BACK_TEST
Passed		ST_CDSP_GSM_TX_POWER_TEST
Passed		ST_KEYBOARD_STUCK_TEST
Passed		ST_LPRF_IF_TEST
Passed		ST_CAMERA_IF_TEST
Passed		ST_SEC_CAMERA_IF_TEST
Passed		ST_LPRF_AUDIO_LINES_TEST
Passed		ST_MAIN_LCD_IF_TEST
Passed		ST_BT_WAKEUP_TEST
Passed		ST_RADIO_TEST
Selftests done, Tests total: 31, Tests passed: 29, Tests not passed: 2



Started Phone Security Analysis...
MCU Version	V 07.10
MCU Date	15-07-09
Product		RM-243 (Nokia 6120 classic)
Manufacturer	(c) Nokia
IMEI		359808016439187
Mastercode	2523163761
Reading Security Block...
Security block OK and saved to "RM-243_359808016439187_21.03.2013_190814.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
-- SIMLOCK PROBLEM --

Phone have failed SIMLOCK Test, that means Simlock Area is DAMAGED!
To repair simlock area, Select Unlock method : "RPL CALCULATION",
And then click DIRECT UNLOCK. SL Area will be re-formatted.

-- SIMLOCK PROBLEM --
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
"1730001978B901584A11D929C0CF1AE792AD304A.C00045B2" Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
SIMLOCK FOUND AND CHECKSUM OK! PASSED!
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!

Это железная проблема yurii-62глянь на лог,некотрых ПО операций не выложил,но по этому логу видно думаю будет,твой RPL залил и PM.
P.S.сто пудово железо!