Nokia 5130 белый экран и отключается

[Fluderator]

Посадил флешку с донора,теперь чек не проходит,вот лог Циклона:

Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000296
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		192002117FD34950B8A59709FED7C8CD1762B1CE
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
ConfId[32]: 0002FFFFFFFF
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
Prepare phone failed with message -> Not found required CMT Algorithm
Failed to Check BB5 Flashing Bus  -> Failed to Boot / Prepare Phone

Лог УФСА:

1ST BOOT  : C0,07 [Rm-495] [2.2.0.3]
CMT ASICID: 000000010000022600010006030C192101033000
EM 1 ID   : 00000296
EM 2 ID   : 00000B22
CMT PUBID : 192002117FD34950B8A59709FED7C8CD1762B1CE
CMT MODE  : 00
CMT HASH  : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROMID : 273F6D55DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT UNKID : 32 02FFFFFFFFC800
CMT 2ND Boot OK
CMT ALGO  : RAP3Gv3_algo.fg, Ver: 9.17.0
00000000: 02 00 00 00 00 D1 72                             ......r
ERR: CMT ALG Boot CERT MISM
Rebooting Mobile

такое ощущение было при пошатывании флешки,как будто она на брюхе сидит.Какие еще варианты могут быть?