[Решено]Samsung C3200 как прошить?

[maxim'ka]

Открою тему.
Тело пришло с отсутствием надписей меню и т.д. , т.е. пустой нижней строкой.
Шьется вдоль и поперек

Device synchronized.
Injecting EBL-Loader (PSI).
Injecting EBL
Boot-loader is active
EBL version: xmm2130_INSA_JD2_10.2_M1S1 10..2
Boot mode is: BB
Using: Faster CRC, Writing all blocks  
Package length is 2048
Baud rate set to 921600
Get flash id.
CFI stage 1
Flash ID is: 88B10089
CFI stage 2
Boot process finished

Start downloading item 'CODE:../HW/XMM6180_EHS2AGR_CATFISH_MADRAS_1.0_CUST/BSY_DEBUG/catfish.fls'' from file 'D:\ремонт мобил\Прошивки\SAMSUNG\C3200\C3200XXJI1_bin\C3200XXJI1_bin.fls''.
Erasing the dynamic eeprom area
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0x23D4)
Verify OK
Process time was 4 min 15  sec.

Start downloading item 'CODE:../HW/XMM6180_EHS2AGR_CATFISH_MADRAS_1.0_CUST/CDS_DEBUG/catfish.fls'' from file 'D:\ремонт мобил\Прошивки\SAMSUNG\C3200\C3200XXJI1_cds\C3200XXJI1_cds.fls''.
Erasing the dynamic eeprom area
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0x4038)
Verify OK
Process time was 15.5 sec.

Start downloading item 'CUST:temp_GT-C3200_OXE.dffs'' from file 'D:\ремонт мобил\Прошивки\SAMSUNG\C3200\C3200XEJG2\C3200OXEJG2.dffs''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0x0000)
Verify OK
Process time was 3 min 42  sec.

Total time was 8 min 23  sec.
Channel 1 is succesfully closed.

После прошивки не включается, висит в буте.
Шил разными прошивками. Изначально тело работало, проблемма была только в отображении текстовой информации о кнопках управления...
Да, на наклейке версия ПО: C3200XXKJ1