iPhone4 Wi-Fi J8+ передатчик - GSM Форум

ja_tyt · 27.10.2011, 09:24

на данном аппарате мертвый передатчик sky77552-11 , с чем он совместим?

**LASDORF** · 27.10.2011, 14:03

SKY77552
Quad-Band Tx / Dual-Band Rx iPAC™ FEM for GSM / GPRS (824–915 MHz and 1710–1910 MHz)

Описание на английском

The SKY77552 is a quad-band transmit and dual-band receive front-end module (FEM) with Integrated Power Amplifier Control (iPAC™) for cellular handsets comprising GSM and DCS/PCS operation. The FEM has quad-band capability in applications of U.S. or Euro dual-band platforms. Designed in a low profile, compact form factor, the SKY77552 offers a complete Transmit VCO-to- Antenna and Antenna-to-Receive SAW filter solution. The FEM also supports Class 12 General Packet Radio Service (GPRS) multi-slot operation.

The module consists of a GSM PA block and a DCS/PCS PA block, impedance-matching circuitry for 50 *****937; input and output impedances, Tx harmonics filtering, high linearity and low insertion loss PHEMT RF switches, diplexer and a Power Amplifier Control (PAC) block with internal current sense resistor. A custom BiCMOS integrated circuit provides the internal PAC function and decoder circuitry to control the RF switches. The two Heterojunction Bipolar Transistor (HBT) PA blocks are fabricated onto a single Gallium Arsenide (GaAs) die. One PA block supports the GSM band and the other PA block supports the DCS/PCS band. Both PA blocks share common power supply pads to distribute current. The output of each PA block and the outputs to the two receive pads are connected to the antenna pad through PHEMT RF switches and a diplexer. The GaAs die, PHEMT die, Silicon (Si) die and passive components are mounted on a multi-layer laminate substrate. The assembly is encapsulated with plastic overmold.

Band selection and control of transmit and receive modes are performed using two external control pads. Refer to the functional block diagram in Figure 1. The band select pad (BS) selects between GSM and DCS/PCS modes of operation. The transmit enable (TxEN) pad controls receive or transmit mode of the respective RF switch (Tx = logic 1). Proper timing between transmit enable (TxEN) and Analog Power Control (VRAMP) allows for high isolation between the antenna and Tx-VCO while the VCO is being tuned prior to the transmit burst.

The SKY77552 is compatible with logic levels from 1.2 V to VCC for BS and TxEN pads, depending on the level applied to the VLOGIC pad. This feature provides additional flexibility for the designer in the selection of FEM interface control logic.

Встречал на каких-то китайцах с процом 6253, если память не изменяет.

А купить можно тут.

ja_tyt · 28.10.2011, 09:38

спасибо!будем искать! а купить видимо не получится выдает : "No result found."

**LASDORF** · 28.10.2011, 12:01

Цитата:

Сообщение от ja_tyt

спасибо!будем искать! а купить видимо не получится выдает : "No result found."

Как вариант, сделать запрос поставщику по эл. почте.

**RED** · 28.10.2011, 13:32

Цитата:

Сообщение от ja_tyt

спасибо!будем искать! а купить видимо не получится выдает : "No result found."

Обратитесь к taa73

http://gsmforum.su/member.php?u=41495

27.10.2011, 09:24	#1
ja_tyt Пользователь Регистрация: 28.11.2007 Адрес: 93rus Сообщений: 49 Поблагодарил: 14 Поблагодарили 2 раз за 2 сообщений Репа: 0	iPhone4 Wi-Fi J8+ передатчик на данном аппарате мертвый передатчик sky77552-11 , с чем он совместим?

Опции темы
Версия для печати Отправить по электронной почте
Опции просмотра	Оценка этой теме
Линейный вид Комбинированный вид Древовидный вид	Оценка этой теме:

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
k550i нет сети не передатчик	санёчек	Sony Ericsson для новичков	11	19.08.2009 02:39
nokia 8800 летит передатчик	Ankelon63	Nokia - для новичков	1	09.02.2009 21:53
E398 - сгорел передатчик. Чем заменить?	alexgol	Motorola P2K аппаратный ремонт	5	25.11.2007 14:04
Какой марки передатчик на K500?	lee_phosaly	Sony Ericsson- аппаратный ремонт телефонов	1	12.09.2007 15:22

27.10.2011, 14:03	#2
LASDORF Почетный пользователь Регистрация: 17.02.2006 Адрес: Stavropol 26Ru Статус: Der SchilfKater Сообщений: 1,032 Поблагодарил: 2,015 Поблагодарили 2,549 раз за 718 сообщений Репа: 775	SKY77552 Quad-Band Tx / Dual-Band Rx iPAC™ FEM for GSM / GPRS (824–915 MHz and 1710–1910 MHz) Описание на английском The SKY77552 is a quad-band transmit and dual-band receive front-end module (FEM) with Integrated Power Amplifier Control (iPAC™) for cellular handsets comprising GSM and DCS/PCS operation. The FEM has quad-band capability in applications of U.S. or Euro dual-band platforms. Designed in a low profile, compact form factor, the SKY77552 offers a complete Transmit VCO-to- Antenna and Antenna-to-Receive SAW filter solution. The FEM also supports Class 12 General Packet Radio Service (GPRS) multi-slot operation. The module consists of a GSM PA block and a DCS/PCS PA block, impedance-matching circuitry for 50 ***937; input and output impedances, Tx harmonics filtering, high linearity and low insertion loss PHEMT RF switches, diplexer and a Power Amplifier Control (PAC) block with internal current sense resistor. A custom BiCMOS integrated circuit provides the internal PAC function and decoder circuitry to control the RF switches. The two Heterojunction Bipolar Transistor (HBT) PA blocks are fabricated onto a single Gallium Arsenide (GaAs) die. One PA block supports the GSM band and the other PA block supports the DCS/PCS band. Both PA blocks share common power supply pads to distribute current. The output of each PA block and the outputs to the two receive pads are connected to the antenna pad through PHEMT RF switches and a diplexer. The GaAs die, PHEMT die, Silicon (Si) die and passive components are mounted on a multi-layer laminate substrate. The assembly is encapsulated with plastic overmold. Band selection and control of transmit and receive modes are performed using two external control pads. Refer to the functional block diagram in Figure 1. The band select pad (BS) selects between GSM and DCS/PCS modes of operation. The transmit enable (TxEN) pad controls receive or transmit mode of the respective RF switch (Tx = logic 1). Proper timing between transmit enable (TxEN) and Analog Power Control (VRAMP) allows for high isolation between the antenna and Tx-VCO while the VCO is being tuned prior to the transmit burst. The SKY77552 is compatible with logic levels from 1.2 V to VCC for BS and TxEN pads, depending on the level applied to the VLOGIC pad. This feature provides additional flexibility for the designer in the selection of FEM interface control logic. Встречал на каких-то китайцах с процом 6253, если память не изменяет. А купить можно тут**.

28.10.2011, 09:38	#3
ja_tyt Пользователь Регистрация: 28.11.2007 Адрес: 93rus Сообщений: 49 Поблагодарил: 14 Поблагодарили 2 раз за 2 сообщений Репа: 0	спасибо!будем искать! а купить видимо не получится выдает : "No result found."