Новые версии ПО для UFSxHWK от SarasSoft

[Нодир]

Date: 14/09/2008

The Official release is ready in our download area http://sarunasoftware.com.


Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.8.0----------------------

1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.
LG_GSM V 2.0.8.0
-----------------

v 2.0.8.0 (HWK Required)
-------1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.


SAMs V 2.0.8.0---------------

TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.
SeDBx v2.0.8.0
---------------

DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.

[taa73]

HWK_Setup_Suite_v02[1].08.000....