Успешное применение [CM2QLM Qualcomm]

[ddilshod93]

Lenovo YT3-X50M Read info/Read Factory Flash/Reset FRP!

Operation : Identify [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 07FCFF87
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 1CE49E78D743487B2419FBE4237EF6D6
ID_BLOCK_L : D7AE10BBBC27971CB17C518E846B0546
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] 
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!


Brand     : Lenovo
ProdName  : YT3-X50M
ProdModel : Lenovo YT3-X50M
Device    : YT3-X50M
AndroidVer: 6.0.1
Manufact. : LENOVO
QLMxCPU   : MSM8909

Done!
Elapsed: 00:00:10

Reconnect Power/Cable!

Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 07FCFF87
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 1CE49E78D743487B2419FBE4237EF6D6
ID_BLOCK_L : D7AE10BBBC27971CB17C518E846B0546
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] 
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!


Brand     : Lenovo
ProdName  : YT3-X50M
ProdModel : Lenovo YT3-X50M
Device    : YT3-X50M
AndroidVer: 6.0.1
Manufact. : LENOVO
QLMxCPU   : MSM8909

DevInfo : MSM8909__LENOVO__Lenovo__ANDR_v6.0.1__Lenovo_YT3-X50M__YT3-X50M__YT3-X50M

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : countrycode.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : recovery.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 2333 MiB

Done!
Elapsed: 00:06:07

Reconnect Power/Cable!

Operation : Reset Settings [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 07FCFF87
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 1CE49E78D743487B2419FBE4237EF6D6
ID_BLOCK_L : D7AE10BBBC27971CB17C518E846B0546
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] 
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!

Remove FRP ( Google Reset Protection )
FRP removed!
Reset Ok!

Done!
Elapsed: 00:00:12

Reconnect Power/Cable!