Philips Xenium X126 код пользователя.

[slawok25]

Все получилось! Вот лог

лог

Device synchronized.
Boot-loader is active
EBL version: XMM1100_RAM_Bootloader 11..0
Boot mode is: BB
Using: Faster CRC, Writing all blocks
Package length is 2048
Baud rate set to 57600
Get flash id.
CFI stage 1
Flash ID is: 401600EF
CFI stage 2
Boot process finished

Start downloading item 'CODE:XMM1100_32M_SafeMode.fls'' from file 'C:\1\X126_I1100D_1220_XX_V42A_RU\XMM1100_32M_Safe Mode.fls''.
Erasing the dynamic eeprom area
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Load region 1
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0xC8E9)
Verify OK
Process time was 9 min 2 sec.

Start downloading item 'STAT EEP:../HW/EGVV3/XMM1100D_SF.eep'' from file 'C:\1\X126_I1100D_1220_XX_V42A_RU\XMM1100D_SF.eep' '.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending end-pack.
Checksum OK (0x636D)
Verify OK
Process time was 1716 msec.

Start downloading item 'DYNAMIC_FFS:XMM1100_FFSlite00010.007.dffs'' from file 'C:\1\X126_I1100D_1220_XX_V42A_RU\XMM1100_SF_32M_F FSlite00010.007.dffs''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0xC000)
Verify OK
Process time was 1 min 37 sec.

Start downloading item 'CUST:../HW/EGVV3/cust_package_rct.cust'' from file 'C:\1\X126_I1100D_1220_XX_V42A_RU\cust_package_rct .cust''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Sending end-pack.
Checksum OK (0xF449)
Verify OK
Process time was 2 min 1 sec.

Total time was 12 min 55 sec.
Channel 1 is succesfully closed.

В моем случае нужно было:
- подобрать скорость (57600-исчезли крокозяблы тут EBL version: XMM1100_RAM_Bootloader 11..0)
- и все таки припаятся к пятакам на плате (видимо особенность модели тел.)
На форуме не видел 42 версии прошивки
поэтому прикладываю
Всем спасибо за помощь