nokia X2-00 не включается

[klok17]

Добрый день, принесли нокию x2-00 не вкл, на кнопку реагирует (скачек до 100мА) и все. Пробовал прогревать, не помогло ,в нутри идеальный. Пытался перепрошить анологично вот лог прошивки.

Connect phone on selected interface...

Core : v1.42 , FlashEngine : v1.25

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm618__08.25.mcusw
PPM : rm618__08.25.ppm_i
CNT : rm618__08.25.image_i_0595063_008
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000000000000022000509200C0000
CPU ID :       BroadCom 21351 , Features : Dead-Test, USBCRT, FullUSB
EM0 ID:        00005361
PUBLIC ID:     000000000090561AC90C382EBEAA25694DF89542
ASIC MODE ID:  00
ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
ROM ID:        DE56D582BDDE7A3A
Use BCM21351_usb2nd.fg  ,  Rev : 2.1  Ver : 11.50.0 
Processing RAWLOADER...
FLIC : 00300020
Req : XSR 1.6
Use BCM21351_XSR16_usbalg.fg  ,  Rev : 2.1  Ver : 11.50.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : E9700989029D9E899915F781B1582048E042A738
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 356236040633844
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\356236040633844_CRT_2nd.rpl

   ===Flashing [MCU]===
Erase : Processing rm618__08.25.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm618__08.25.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [UPDAPP]
Total writen 511 blocks
TIME : Write time : 00:00:05 
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm618__08.25.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm618__08.25.ppm_i
Total writen 109 blocks
TIME : Write time : 00:00:01 
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm618__08.25.image_i_0595063_008
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm618__08.25.image_i_0595063_008
Total writen 350 blocks
TIME : Write time : 00:00:03 
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:12
Reboot phone now...

 - > AfterFlash Failed! :( Reason : Downgrade try or HW Error
     Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!

Elapsed: 00:02:13
Connect phone on selected interface...