Успешное применение, без комментариев [CM2MTK MediaTek]

[romrip]

Read INFO

Operation : Check / Read Info [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 165 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G61CM
[eMMC] : FLASH_CID : 7001004D4D43313647030E22A42A50D9
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000003AC000000
[eMMC] : FLASH_UCP : 15040 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Android
ProdName  : hl9_cc_zte_ru_mul
ProdModel : ZTE_PAD_E7
Device    : L9
AndroidVer: 4.1.1
MTKxCPU   : MT6577
MTKxPRJ   : ALPS.JB.MP.V1.5

MODEM : 
BaseBand  : MT6577_S00_MAUI_11AMD_W12_22_SP_V18

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!

Read NVRAM

Operation : Read NVRAM [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 165 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G61CM
[eMMC] : FLASH_CID : 7001004D4D43313647030E22A42A50D9
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000003AC000000
[eMMC] : FLASH_UCP : 15040 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6577_S00_MAUI_11AMD_W12_22_SP_V18
Read Ok, MT6577_S00_MAUI_11AMD_W12_22_SP_V18_eMMC_ZTE_e-learning_PAD_E7.spnv saved

Done!
Elapsed: 00:00:47
Reconnect Power/Cable!

Read FLASH

Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 165 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G61CM
[eMMC] : FLASH_CID : 7001004D4D43313647030E22A42A50D9
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000003AC000000
[eMMC] : FLASH_UCP : 15040 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

MT657x Old CPU : Skip Initial Info read

[Image Ok] : preloader_hl9_cc_zte_ru_mul.bin
[Image Ok] : DSP_BL
[Image Ok] : MBR
[Image Ok] : EBR1
[Image Ok] : lk.bin
[Image Ok] : boot.img
[Image Ok] : recovery.img
[Image Ok] : secro.img
[Image Ok] : logo.bin
[Image Ok] : system.img
[Image Ok] : cache.img
[Image Ok] : userdata.img

Brand     : Android
ProdName  : hl9_cc_zte_ru_mul
ProdModel : ZTE_PAD_E7
Device    : L9
AndroidVer: 4.1.1
MTKxCPU   : MT6577
MTKxPRJ   : ALPS.JB.MP.V1.5

[ScatCFG] : MT6577 / V1.0.0 / hl9_cc_zte_ru_mul / EMMC
FW Size : 502 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6577__Android__ZTE_PAD_E7__L9__4.1.1__ALPS.JB.MP.V1.5\

All done!

Done!
Elapsed: 00:04:46
Reconnect Power/Cable!

Read Pattern

Operation : Read Pattern/DP Lock [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 165 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G61CM
[eMMC] : FLASH_CID : 7001004D4D43313647030E22A42A50D9
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000003AC000000
[eMMC] : FLASH_UCP : 15040 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ... 

[Info] : PatternLock Not Set!
[Info] : DP Lock not set!

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!

Read User DATA

Operation : Read UserData [ v1.40 ]

PhoneBook : Enabled

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 165 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G61CM
[eMMC] : FLASH_CID : 7001004D4D43313647030E22A42A50D9
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000003AC000000
[eMMC] : FLASH_UCP : 15040 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Processiung : PhoneBook extraction

Step #1
Step #2


PhoneBook seems as Empty! Nothing found :(

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!

Format Filesystem

Operation : Format FileSystem [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 165 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G61CM
[eMMC] : FLASH_CID : 7001004D4D43313647030E22A42A50D9
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000003AC000000
[eMMC] : FLASH_UCP : 15040 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!